The set of dialer configuration attributes for one port.
Parsed from file dialer.mib.txt
Company: None
Module: EICON-DIALER-MIB
The set of dialer configuration attributes for one port.
Parsed from file EICON-DIALER-MIB.mib
Module: EICON-DIALER-MIB
Vendor: EICON
Module: EICON-DIALER-MIB
[Automatically extracted from oidview.com]
dialerV25bisInfoEntry OBJECT-TYPE SYNTAX DialerV25bisInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The set of dialer configuration attributes for one port." INDEX { dialerV25bisPortRef } ::= { dialerV25bisInfoTable 1 }
dialerV25bisInfoEntry OBJECT-TYPE SYNTAX DialerV25bisInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The set of dialer configuration attributes for one port." INDEX { dialerV25bisPortRef } ::= { dialerV25bisInfoTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.434.2.2.4.16.5.1.1 | dialerV25bisPortRef | 0 | 0 | The Port Number. |
1.3.6.1.4.1.434.2.2.4.16.5.1.2 | dialerV25bisPrimaryNum | 0 | 0 | The main telephone number stored in the dialer. |
1.3.6.1.4.1.434.2.2.4.16.5.1.3 | dialerV25bisSecondaryNum | 0 | 0 | The alternate telephone number stored in the dialer. This number is dialed if the main number is busy of if there is no answer. |
1.3.6.1.4.1.434.2.2.4.16.5.1.4 | dialerV25bisAnsEnable | 0 | 0 | States whether or not the dialer answers incoming calls. |
1.3.6.1.4.1.434.2.2.4.16.5.1.5 | dialerV25bisRetryAllowed | 0 | 0 | Indicates whether or not the dialer will try to redial a number that is busy or does not answer. |
1.3.6.1.4.1.434.2.2.4.16.5.1.6 | dialerV25bisMaxRetries | 0 | 0 | Specifies how many times a number will be redialed if it is busy or otherwise unresponsive. |
1.3.6.1.4.1.434.2.2.4.16.5.1.7 | dialerV25bisRetryDelay | 0 | 0 | The amount of time in msecs between redial attempts. |
1.3.6.1.4.1.434.2.2.4.16.5.1.8 | dialerV25bisConnDelay | 0 | 0 | Maximum delay for connection establishment (secs). |
1.3.6.1.4.1.434.2.2.4.16.5.1.9 | dialerV25bisOnOffDelay | 0 | 0 | The delay allowed in seconds for the DSR to go off before hangup. |
1.3.6.1.4.1.434.2.2.4.16.5.1.10 | dialerV25bisLossDelay | 0 | 0 | Amount of delay in msecs before DSR debouncing for OFF. |
1.3.6.1.4.1.434.2.2.4.16.5.1.11 | dialerV25bisMinDsrOnDelay | 0 | 0 | Amount of delay in msecs before DSR debouncing for ON. |
1.3.6.1.4.1.434.2.2.4.16.5.1.12 | dialerV25bisRiDtrDelay | 0 | 0 | Amount of delay in msec before raising DTR when RING occurs. |
1.3.6.1.4.1.434.2.2.4.16.5.1.13 | dialerV25bisHangupDelay | 0 | 0 | Amount of delay in secs before hangup, if DSR goes OFF in connected state. |
1.3.6.1.4.1.434.2.2.4.16.5.1.14 | dialerV25bisDeltaRiDelay | 0 | 0 | Delay in msecs before rings are no longer occur. |
1.3.6.1.4.1.434.2.2.4.16.5.1.15 | dialerV25bisCtsOnDelay | 0 | 0 | Maximum delay in msecs for sending a message to the modem. |
1.3.6.1.4.1.434.2.2.4.16.5.1.16 | dialerV25bisDtrSignal | 0 | 0 | DTR status. |
1.3.6.1.4.1.434.2.2.4.16.5.1.17 | dialerV25bisDsrSignal | 0 | 0 | DSR status. |
1.3.6.1.4.1.434.2.2.4.16.5.1.18 | dialerV25bisCtsSignal | 0 | 0 | CTS status. |
1.3.6.1.4.1.434.2.2.4.16.5.1.19 | dialerV25bisRiSignal | 0 | 0 | RI status. |
1.3.6.1.4.1.434.2.2.4.16.5.1.20 | dialerV25bisState | 0 | 0 | The status of the V.25bis modem: on-hook (1) - Modem not active ready (2) - Connection established dialing (3) - Dialing a number… |