The set of dialer configuration attributes for one port.
Parsed from file dialer.mib.txt
Company: None
Module: EICON-DIALER-MIB
The set of dialer configuration attributes for one port.
Parsed from file EICON-DIALER-MIB.mib
Module: EICON-DIALER-MIB
Vendor: EICON
Module: EICON-DIALER-MIB
[Automatically extracted from oidview.com]
dialerAtCmdInfoEntry OBJECT-TYPE SYNTAX DialerAtCmdInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The set of dialer configuration attributes for one port." INDEX { dialerAtCmdPortRef } ::= { dialerAtCmdInfoTable 1 }
dialerAtCmdInfoEntry OBJECT-TYPE SYNTAX DialerAtCmdInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The set of dialer configuration attributes for one port." INDEX { dialerAtCmdPortRef } ::= { dialerAtCmdInfoTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.434.2.2.4.16.6.1.1 | dialerAtCmdPortRef | 0 | 0 | The Port Number. |
1.3.6.1.4.1.434.2.2.4.16.6.1.2 | dialerAtCmdPrimaryNum | 0 | 0 | The main telephone number stored in the dialer. |
1.3.6.1.4.1.434.2.2.4.16.6.1.3 | dialerAtCmdSecondaryNum | 0 | 0 | The alternate telephone number stored in the dialer. This number is dialed if the main number is busy or if there is no answer. |
1.3.6.1.4.1.434.2.2.4.16.6.1.4 | dialerAtCmdAnsEnable | 0 | 0 | States whether or not the dialer answers incoming calls. |
1.3.6.1.4.1.434.2.2.4.16.6.1.5 | dialerAtCmdRetryAllowed | 0 | 0 | Indicates whether or not the dialer will try to redial a number that is busy or does not answer. |
1.3.6.1.4.1.434.2.2.4.16.6.1.6 | dialerAtCmdMaxRetries | 0 | 0 | Specifies how many times a number will be redialed if it is busy or otherwise unresponsive. |
1.3.6.1.4.1.434.2.2.4.16.6.1.7 | dialerAtCmdRetryDelay | 0 | 0 | The amount of time in msecs between redial attempts. |
1.3.6.1.4.1.434.2.2.4.16.6.1.8 | dialerAtCmdConnDelay | 0 | 0 | Maximum delay for connection establishment (secs). |
1.3.6.1.4.1.434.2.2.4.16.6.1.9 | dialerAtCmdOnOffDelay | 0 | 0 | The delay allowed in seconds for the DSR signal to go off before hangup. |
1.3.6.1.4.1.434.2.2.4.16.6.1.10 | dialerAtCmdLossDelay | 0 | 0 | Number of msecs allowed before DSR debouncing for OFF. |
1.3.6.1.4.1.434.2.2.4.16.6.1.11 | dialerAtCmdMinDsrOnDelay | 0 | 0 | msecs DSR debouncing for ON before going OFF. |
1.3.6.1.4.1.434.2.2.4.16.6.1.12 | dialerAtCmdRiDtrDelay | 0 | 0 | Amount of delay in msec, before raising DTR when RING occurs. |
1.3.6.1.4.1.434.2.2.4.16.6.1.13 | dialerAtCmdHangupDelay | 0 | 0 | Amount of delay in secs before hangup, if DSR goes OFF in connected state. |
1.3.6.1.4.1.434.2.2.4.16.6.1.14 | dialerAtCmdDeltaRiDelay | 0 | 0 | delay in msecs before rings no longer occur. |
1.3.6.1.4.1.434.2.2.4.16.6.1.15 | dialerAtCmdParity | 0 | 0 | The parity. |
1.3.6.1.4.1.434.2.2.4.16.6.1.16 | dialerAtCmdBitsPerByte | 0 | 0 | The number of data bits per byte. |
1.3.6.1.4.1.434.2.2.4.16.6.1.17 | dialerAtCmdModemSpeed | 0 | 0 | Modem Speed. |
1.3.6.1.4.1.434.2.2.4.16.6.1.18 | dialerAtCmdDtrSignal | 0 | 0 | DTR status. |
1.3.6.1.4.1.434.2.2.4.16.6.1.19 | dialerAtCmdDsrSignal | 0 | 0 | DSR status. |
1.3.6.1.4.1.434.2.2.4.16.6.1.20 | dialerAtCmdRiSignal | 0 | 0 | RI status. |
1.3.6.1.4.1.434.2.2.4.16.6.1.21 | dialerAtCmdState | 0 | 0 | The status of the AT modem: on-hook (1) - modem not active dialing (2) - dialing a number answering (3) - accepting call from rem… |