The set of dialer configuration attributes for one port.
Parsed from file dialer.mib.txt
Company: None
Module: EICON-DIALER-MIB
The set of dialer configuration attributes for one port.
Parsed from file EICON-DIALER-MIB.mib
Module: EICON-DIALER-MIB
Vendor: EICON
Module: EICON-DIALER-MIB
[Automatically extracted from oidview.com]
dialerV22BisDnaInfoEntry OBJECT-TYPE SYNTAX DialerV22BisDnaInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The set of dialer configuration attributes for one port." INDEX { dialerV22BisDnaPortRef } ::= { dialerV22BisDnaInfoTable 1 }
dialerV22BisDnaInfoEntry OBJECT-TYPE SYNTAX DialerV22BisDnaInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The set of dialer configuration attributes for one port." INDEX { dialerV22BisDnaPortRef } ::= { dialerV22BisDnaInfoTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.434.2.2.4.16.7.1.1 | dialerV22BisDnaPortRef | 0 | 0 | The Port Number. |
1.3.6.1.4.1.434.2.2.4.16.7.1.2 | dialerV22BisDnaPrimaryNum | 0 | 0 | The main telephone number stored in the dialer. |
1.3.6.1.4.1.434.2.2.4.16.7.1.3 | dialerV22BisDnaSecondaryNum | 0 | 0 | The alternate telephone number stored in the dialer. This number is dialed if the main number is busy or if there is no answer. |
1.3.6.1.4.1.434.2.2.4.16.7.1.4 | dialerV22BisDnaAnsEnable | 0 | 0 | States whether or not the dialer answers incoming calls. |
1.3.6.1.4.1.434.2.2.4.16.7.1.5 | dialerV22BisDnaRetryAllowed | 0 | 0 | Indicates whether or not the dialer will try to redial a number that is busy or does not answer. |
1.3.6.1.4.1.434.2.2.4.16.7.1.6 | dialerV22BisDnaMaxRetries | 0 | 0 | Specifies how many times a number will be redialed if it is busy or otherwise unresponsive. |
1.3.6.1.4.1.434.2.2.4.16.7.1.7 | dialerV22BisDnaCallProgress | 0 | 0 | Call progress tone detection. |
1.3.6.1.4.1.434.2.2.4.16.7.1.8 | dialerV22BisDnaDecadic | 0 | 0 | Indicates whether Decadic dialing is active or not. Decadic dialing does the following: each digit you dial is subtracted from 10… |
1.3.6.1.4.1.434.2.2.4.16.7.1.9 | dialerV22BisDnaMakeBreakRatio | 0 | 0 | Ratio for PULSE and DIAL make and break time. |
1.3.6.1.4.1.434.2.2.4.16.7.1.10 | dialerV22BisDnaRetryDelay | 0 | 0 | The amount of time in msecs between redial attempts. |
1.3.6.1.4.1.434.2.2.4.16.7.1.11 | dialerV22BisDnaMinDialDelay | 0 | 0 | The length of delay (msec) associated with a comma placed in a dialing command. |
1.3.6.1.4.1.434.2.2.4.16.7.1.12 | dialerV22BisDnaWaitDialTone | 0 | 0 | The amount of time (msec) the modem waits when it encounters the wait for dial tone modifier in dial string. |
1.3.6.1.4.1.434.2.2.4.16.7.1.13 | dialerV22BisDnaWaitCarrier | 0 | 0 | The amount of time (msec) the modem waits for valid carrier after completing a dial. |
1.3.6.1.4.1.434.2.2.4.16.7.1.14 | dialerV22BisDnaHndshkAbortTimer | 0 | 0 | The amount of time (sec) allowed before the call is aborted if DSR does not go ON. |
1.3.6.1.4.1.434.2.2.4.16.7.1.15 | dialerV22BisDnaGuardTone | 0 | 0 | Indicates a guard tone frequency. |
1.3.6.1.4.1.434.2.2.4.16.7.1.16 | dialerV22BisDnaPulseDelay | 0 | 0 | The delay (msec) between digits dialed on a pulse line. |
1.3.6.1.4.1.434.2.2.4.16.7.1.17 | dialerV22BisDnaDTMFDuration | 0 | 0 | The tone duration (msec) used in DMTF dialing. |
1.3.6.1.4.1.434.2.2.4.16.7.1.18 | dialerV22BisDnaDTMFDelay | 0 | 0 | The delay (msec) between digits dialed when in tone dial mode. |
1.3.6.1.4.1.434.2.2.4.16.7.1.19 | dialerV22BisDnaDTMFLevel | 0 | 0 | The tone dialing level attenuation in dB. |
1.3.6.1.4.1.434.2.2.4.16.7.1.20 | dialerV22BisDnaTxLevel | 0 | 0 | The attenuation level (Db) on data transmission, once the handshake is completed with the remote modem. |
1.3.6.1.4.1.434.2.2.4.16.7.1.21 | dialerV22BisDnaRxLevel | 0 | 0 | Minimum acceptable receiver threshold value. This indicates whether a 3dB attenuation is used on the receive signal at line input. |
1.3.6.1.4.1.434.2.2.4.16.7.1.22 | dialerV22BisDnaRiNbr | 0 | 0 | The number of rings required before the modem answers, if it is set to auto-answer mode. |
1.3.6.1.4.1.434.2.2.4.16.7.1.23 | dialerV22BisDnaDeltaRiDelay | 0 | 0 | delay in msecs before rings no longer occur. |
1.3.6.1.4.1.434.2.2.4.16.7.1.24 | dialerV22BisDnaRiDtrDelay | 0 | 0 | Amount of delay in msec, before raising DTR when RING occurs. |
1.3.6.1.4.1.434.2.2.4.16.7.1.25 | dialerV22BisDnaDsrRtsDelay | 0 | 0 | Delay between arrival of DSR and activation of RTS circuit in msec. |
1.3.6.1.4.1.434.2.2.4.16.7.1.26 | dialerV22BisDnaModemSpeed | 0 | 0 | Modem Speed. |
1.3.6.1.4.1.434.2.2.4.16.7.1.27 | dialerV22BisDnaDtrSignal | 0 | 0 | DTR status. |
1.3.6.1.4.1.434.2.2.4.16.7.1.28 | dialerV22BisDnaDsrSignal | 0 | 0 | DSR status. |
1.3.6.1.4.1.434.2.2.4.16.7.1.29 | dialerV22BisDnaRiSignal | 0 | 0 | RI status. |
1.3.6.1.4.1.434.2.2.4.16.7.1.30 | dialerV22BisDnaCdSignal | 0 | 0 | Carrier detect status. |
1.3.6.1.4.1.434.2.2.4.16.7.1.31 | dialerV22BisDnaToneInd | 0 | 0 | Tone indication. |
1.3.6.1.4.1.434.2.2.4.16.7.1.32 | dialerV22BisDnaDloInd | 0 | 0 | Dial line occupied indication. |
1.3.6.1.4.1.434.2.2.4.16.7.1.33 | dialerV22BisDnaState | 0 | 0 | Status of the V22bis Dna modem: dialing-phone (1) - Dialing a number on the phone attached to the DNA phone plug. dialing-mdm (2) … |