The set of dialer configuration attributes for one port.
Parsed from file dialer.mib.txt
Company: None
Module: EICON-DIALER-MIB
The set of dialer configuration attributes for one port.
Parsed from file EICON-DIALER-MIB.mib
Module: EICON-DIALER-MIB
Vendor: EICON
Module: EICON-DIALER-MIB
[Automatically extracted from oidview.com]
dialerV22BisImcInfoEntry OBJECT-TYPE SYNTAX DialerV22BisImcInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The set of dialer configuration attributes for one port." INDEX { dialerV22BisImcPortRef } ::= { dialerV22BisImcInfoTable 1 }
dialerV22BisImcInfoEntry OBJECT-TYPE SYNTAX DialerV22BisImcInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The set of dialer configuration attributes for one port." INDEX { dialerV22BisImcPortRef } ::= { dialerV22BisImcInfoTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.434.2.2.4.16.8.1.1 | dialerV22BisImcPortRef | 0 | 0 | The Port Number. |
1.3.6.1.4.1.434.2.2.4.16.8.1.2 | dialerV22BisImcPrimaryNum | 0 | 0 | The main telephone number stored in the dialer. |
1.3.6.1.4.1.434.2.2.4.16.8.1.3 | dialerV22BisImcSecondaryNum | 0 | 0 | The alternate telephone number stored in the dialer. This number is dialed if the main number is busy or if there is no answer. |
1.3.6.1.4.1.434.2.2.4.16.8.1.4 | dialerV22BisImcAnsEnable | 0 | 0 | States whether or not the dialer answers incoming calls. |
1.3.6.1.4.1.434.2.2.4.16.8.1.5 | dialerV22BisImcRetryAllowed | 0 | 0 | Indicates whether or not the dialer will try to redial a number that is busy or does not answer. |
1.3.6.1.4.1.434.2.2.4.16.8.1.6 | dialerV22BisImcMaxRetries | 0 | 0 | Specifies how many times a number will be redialed if it is busy or otherwise unresponsive. |
1.3.6.1.4.1.434.2.2.4.16.8.1.7 | dialerV22BisImcCallProgress | 0 | 0 | Call progress tone detection. |
1.3.6.1.4.1.434.2.2.4.16.8.1.8 | dialerV22BisImcDecadic | 0 | 0 | Indicates whether Decadic dialing is active or not. Decadic dialing does the following: each digit you dial is subtracted from 10… |
1.3.6.1.4.1.434.2.2.4.16.8.1.9 | dialerV22BisImcMakeBreakRatio | 0 | 0 | Ratio of PULSE and DIAL make and break time. |
1.3.6.1.4.1.434.2.2.4.16.8.1.10 | dialerV22BisImcRetryDelay | 0 | 0 | The amount of time in msecs between redial attempts. |
1.3.6.1.4.1.434.2.2.4.16.8.1.11 | dialerV22BisImcMinDialDelay | 0 | 0 | The length of delay (msec) associated with a comma placed in a dialing command. |
1.3.6.1.4.1.434.2.2.4.16.8.1.12 | dialerV22BisImcWaitDialTone | 0 | 0 | The amount of time (msec) the modem waits when it encounters the wait for dial tone modifier in dial string. |
1.3.6.1.4.1.434.2.2.4.16.8.1.13 | dialerV22BisImcWaitCarrier | 0 | 0 | The amount of time (msec) the modem waits for valid carrier after completing a dial. |
1.3.6.1.4.1.434.2.2.4.16.8.1.14 | dialerV22BisImcHndshkAbortTimer | 0 | 0 | The amount of time (sec) allowed before the call is aborted if DSR does not go ON. |
1.3.6.1.4.1.434.2.2.4.16.8.1.15 | dialerV22BisImcGuardTone | 0 | 0 | Indicates a guard tone frequency. |
1.3.6.1.4.1.434.2.2.4.16.8.1.16 | dialerV22BisImcPulseDelay | 0 | 0 | The delay between (msec) digits dialed on a pulse line. |
1.3.6.1.4.1.434.2.2.4.16.8.1.17 | dialerV22BisImcDTMFDuration | 0 | 0 | The tone (msec) duration used in DMTF dialing. |
1.3.6.1.4.1.434.2.2.4.16.8.1.18 | dialerV22BisImcDTMFDelay | 0 | 0 | The delay (msec) between digits dialed when in tone dial mode. |
1.3.6.1.4.1.434.2.2.4.16.8.1.19 | dialerV22BisImcDTMFLevel | 0 | 0 | The tone dialing level attenuation in dB. |
1.3.6.1.4.1.434.2.2.4.16.8.1.20 | dialerV22BisImcTxLevel | 0 | 0 | The attenuation level (Db) on data transmission, once the handshake is completed with the remote modem. |
1.3.6.1.4.1.434.2.2.4.16.8.1.21 | dialerV22BisImcRxLevel | 0 | 0 | Minimum acceptable receiver threshold value. This indicates whether a 3dB attenuation is used on the receive signal at line input. |
1.3.6.1.4.1.434.2.2.4.16.8.1.22 | dialerV22BisImcRiNbr | 0 | 0 | The numbet of rings required before the modem answers, if it is set to auto-answer mode. |
1.3.6.1.4.1.434.2.2.4.16.8.1.23 | dialerV22BisImcDeltaRiDelay | 0 | 0 | delay in msecs before rings no longer occur. |
1.3.6.1.4.1.434.2.2.4.16.8.1.24 | dialerV22BisImcRiDtrDelay | 0 | 0 | Amount of delay in msec, before raising DTR when RING occurs. |
1.3.6.1.4.1.434.2.2.4.16.8.1.25 | dialerV22BisImcDsrRtsDelay | 0 | 0 | Delay between arrival of DSR and activation of RTS circuit in msec. |
1.3.6.1.4.1.434.2.2.4.16.8.1.26 | dialerV22BisImcModemSpeed | 0 | 0 | Modem Speed. |
1.3.6.1.4.1.434.2.2.4.16.8.1.27 | dialerV22BisImcDtrSignal | 0 | 0 | DTR status. |
1.3.6.1.4.1.434.2.2.4.16.8.1.28 | dialerV22BisImcDsrSignal | 0 | 0 | DSR status. |
1.3.6.1.4.1.434.2.2.4.16.8.1.29 | dialerV22BisImcRiSignal | 0 | 0 | RI status. |
1.3.6.1.4.1.434.2.2.4.16.8.1.30 | dialerV22BisImcCdSignal | 0 | 0 | Carrier Detect status. |
1.3.6.1.4.1.434.2.2.4.16.8.1.31 | dialerV22BisImcToneInd | 0 | 0 | Tone indication. |
1.3.6.1.4.1.434.2.2.4.16.8.1.32 | dialerV22BisImcDloInd | 0 | 0 | Dial line occupied indication. |
1.3.6.1.4.1.434.2.2.4.16.8.1.33 | dialerV22BisImcLineType | 0 | 0 | States whether the modem is connected to a Leased or Dial-Up phone line. |
1.3.6.1.4.1.434.2.2.4.16.8.1.34 | dialerV22BisImcLeasedOpertn | 0 | 0 | This applies to Leased line type only. This field states whether the dialer will go off-hook in Originate or Answer mode. |
1.3.6.1.4.1.434.2.2.4.16.8.1.35 | dialerV22BisImcSpeakerLevel | 0 | 0 | The volume level of the Eiconcard's speaker. |
1.3.6.1.4.1.434.2.2.4.16.8.1.36 | dialerV22BisImcState | 0 | 0 | Status of the V22bis Imc modem: dialing-phone (1) - Dialing a number on the phone attached to the DNA phone plug. dialing-mdm (2) … |