Indicates whether a newly upgraded firmware version
should immediately be selected for execution. When
this object is disabled(2), the user must explicitly
set the upgradeFirmwareSource object to select and run
a particular firmware version after an upgrade.
When this object is enabled(1), following a successful
firmware upgrade the system will automatically switch
to run the new firmware. The default value is enabled(1).
Indicates whether a newly upgraded firmware version
should immediately be selected for execution. When
this object is disabled(2), the user must explicitly
set the upgradeFirmwareSource object to select and run
a particular firmware version after an upgrade.
When this object is enabled(1), following a successful
firmware upgrade the system will automatically switch
to run the new firmware. The default value is enabled(1).
Parsed from file ESSWITCH-MIB.my.txt
Company: None
Module: STAND-ALONE-ETHERNET-SWITCH-MIB
Indicates whether a newly upgraded firmware version
should immediately be selected for execution. When
this object is disabled(2), the user must explicitly
set the upgradeFirmwareSource object to select and run
a particular firmware version after an upgrade.
When this object is enabled(1), following a successful
firmware upgrade the system will automatically switch
to run the new firmware. The default value is enabled(1).
Parsed from file STAND-ALONE-ETHERNET-SWITCH-MIB.mib
Module: STAND-ALONE-ETHERNET-SWITCH-MIB
upgradeAutoExecute OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether a newly upgraded firmware version should immediately be selected for execution. When this object is disabled(2), the user must explicitly set the upgradeFirmwareSource object to select and run a particular firmware version after an upgrade. When this object is enabled(1), following a successful firmware upgrade the system will automatically switch to run the new firmware. The default value is enabled(1)." ::= { upgrade 8 }
Vendor: Grand Junction Networks
Module: STAND-ALONE-ETHERNET-SWITCH-MIB
[Automatically extracted from oidview.com]
upgradeAutoExecute OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether a newly upgraded firmware version should immediately be selected for execution. When this object is disabled(2), the user must explicitly set the upgradeFirmwareSource object to select and run a particular firmware version after an upgrade. When this object is enabled(1), following a successful firmware upgrade the system will automatically switch to run the new firmware. The default value is enabled(1)." ::= { upgrade 8 }
upgradeAutoExecute OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether a newly upgraded firmware version should immediately be selected for execution. When this object is disabled(2), the user must explicitly set the upgradeFirmwareSource object to select and run a particular firmware version after an upgrade. When this object is enabled(1), following a successful firmware upgrade the system will automatically switch to run the new firmware. The default value is enabled(1)." ::= { upgrade 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.437.1.1.3.5.8.0 | upgradeAutoExecute | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.437.1.1.3.5.1 | upgradeFirmwareSource | 1 | 1 | Selects the source from which firmware is read. There are 2 possible values, eprom(1) and flash(2). A valid selection will caus… |
| 1.3.6.1.4.1.437.1.1.3.5.2 | upgradeEPROMRevision | 1 | 1 | Returns the revision number of the switch system firmware residing in EPROM. The string has the following format 'V2.01'. |
| 1.3.6.1.4.1.437.1.1.3.5.3 | upgradeFlashSize | 1 | 1 | The size of available FLASH memory in the system, in kilobytes. For example: 128 equals 131072 bytes (128 bytes times 1024). |
| 1.3.6.1.4.1.437.1.1.3.5.4 | upgradeFlashBankStatus | 1 | 1 | Text string indicating status and version of last upgrade to flash memory, including the source of the upgrade, version and the d… |
| 1.3.6.1.4.1.437.1.1.3.5.5 | upgradeTFTPServerAddress | 1 | 1 | The IP address of a TFTP server from which a firmware image can be downloaded. The download may be initiated by setting the upgr… |
| 1.3.6.1.4.1.437.1.1.3.5.6 | upgradeTFTPLoadFilename | 1 | 1 | The name of the file containing a firmware upgrade image on the host whose address is given by upgradeTFTPServerAddress. The def… |
| 1.3.6.1.4.1.437.1.1.3.5.7 | upgradeTFTPInitiate | 1 | 1 | Setting this object to noUpgrade(2) results in no action. When set to upgrade(1), the switch will attempt to download a firmware … |
| 1.3.6.1.4.1.437.1.1.3.5.9 | upgradeTFTPAccept | 1 | 1 | This object controls the second method of firmware upgrade using TFTP. The switch has a UDP Listener on the well known TFTP serv… |
| 1.3.6.1.4.1.437.1.1.3.5.10 | upgradeTFTPServerName | 1 | 1 | The name of a TFTP server DNS name from which a firmware image can be downloaded. The download may be initiated by setting the up… |