This parameter specifies the Address Mask for the Destination IP Address
and has to be mandatorily configured when a valid Destination IP Address
is configured. The mask along with the configured Destination IP Address
specify a range of IP addresses to be compared with the Destination IP
Address of the incoming packet. For example, an address 130.25.2.10 with a
mask of 255.255.255.240 is equivalent to an address range from 130.25.2.0
to 130.25.2.15. An address 130.25.2.10 with a mask of 0.255.255.0
is equivalent to all the addresses falling in *.25.2.*, where the wild
card * is 0-255. An address 130.25.2.10 with a mask of 255.255.255.0
specifies the whole sub-net 130.25.2.*. A mask of 255.255.255.255
specifies only the configured Destination IP Address.
Parsed from file qos_pp.mib.txt
Company: codex
Module: QOS-PP-OPT-MIB
Vendor: Codex
Module: QOS-PP-OPT-MIB
[Automatically extracted from oidview.com]
QoSPPCfg_4_DestinationIPAddressMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies the Address Mask for the Destination IP Address and has to be mandatorily configured when a valid Destination IP Address is configured. The mask along with the configured Destination IP Address specify a range of IP addresses to be compared with the Destination IP Address of the incoming packet. For example, an address 130.25.2.10 with a mask of 255.255.255.240 is equivalent to an address range from 130.25.2.0 to 130.25.2.15. An address 130.25.2.10 with a mask of 0.255.255.0 is equivalent to all the addresses falling in *.25.2.*, where the wild card * is 0-255. An address 130.25.2.10 with a mask of 255.255.255.0 specifies the whole sub-net 130.25.2.*. A mask of 255.255.255.255 specifies only the configured Destination IP Address." ::= { cdx6500QoSPPCfgPPPTableEntry 66 }
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.16 | QoSPPCfg_1_IPXPacketType | 0 | 0 | This indicates the type of service offered or required by the IPX packet. packet types 1 and 4 are not allowed. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.17 | QoSPPCfg_1_IPXSocketNumber | 0 | 0 | This is the socket address of the packet's destination and source process. sockets 0x452 and 0x453 are not allowed. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.18 | QoSPPCfg_1_IPXOrderOfMatch | 0 | 0 | This parameter specifies the order of searching the configured IP/IPX traffic flows in this profile to find a match. The packet … |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.19 | QoSPPCfg_1_TBHigherLayerProtocol | 0 | 0 | This specifies the higher layer protocol being bridged. All flows corresponding to this higher layer protocol in this profile wi… |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.20 | QoSPPCfg_1_TrafficClass | 0 | 0 | This parameter specifies the class to be associated with this traffic flow. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.21 | QoSPPCfg_2_ProtocolType | 0 | 0 | This parameter identifies the protocol family. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.22 | QoSPPCfg_2_IPPrecedenceOption | 0 | 0 | This parameter specifies how the IP precedence has to be treated. NONE - Ignore IP Precedence. SET - Set the IP Precedence. MATCH … |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.23 | QoSPPCfg_2_IncomingIPPrecedence | 0 | 0 | This parameter specifies the IP Precedence to be matched in the IP packet for servicing. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.24 | QoSPPCfg_2_OutgoingIPPrecedence | 0 | 0 | This parameter specifies the IP Precedence to be set in the IP packet after it is serviced. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.25 | QoSPPCfg_2_SourceIPAddress | 0 | 0 | This parameter specifies the address for comparing with the source IP address of the incoming packet. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.26 | QoSPPCfg_2_SourceIPAddressMask | 0 | 0 | This parameter specifies the Address Mask for the Source IP Address and has to be mandatorily configured when a valid Source IP … |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.27 | QoSPPCfg_2_DestinationIPAddress | 0 | 0 | This parameter specifies the address for comparing with the destination IP address of the incoming packet. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.28 | QoSPPCfg_2_DestinationIPAddressMask | 0 | 0 | This parameter specifies the Address Mask for the Destination IP Address and has to be mandatorily configured when a valid Desti… |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.29 | QoSPPCfg_2_IPProtocolNumber | 0 | 0 | This parameter specifies the protocol to be compared with that of the incoming packet. For example, 1 for ICMP, 6 for TCP, 17 fo… |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.30 | QoSPPCfg_2_IPSourcePortNumber | 0 | 0 | This parameter specifies a specific or a range of source ports to be compared with that of the incoming TCP/UDP packet. For exam… |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.31 | QoSPPCfg_2_IPDestinationPortNumber | 0 | 0 | This parameter specifies a specific or a range of destination ports to be compared with that of the incoming TCP/UDP packet. For… |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.32 | QoSPPCfg_2_IPOrderOfMatch | 0 | 0 | This parameter specifies the order of searching the configured IP/IPX traffic flows in this profile to find a match. The packet … |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.33 | QoSPPCfg_2_IPXDestinationNetwork | 0 | 0 | This is the network number of the network to which the destination node belongs. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.34 | QoSPPCfg_2_IPXDestinationNode | 0 | 0 | This value is the physical address of the destination node. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.35 | QoSPPCfg_2_IPXPacketType | 0 | 0 | This indicates the type of service offered or required by the IPX packet. packet types 1 and 4 are not allowed. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.36 | QoSPPCfg_2_IPXSocketNumber | 0 | 0 | This is the socket address of the packet's destination and source process. sockets 0x452 and 0x453 are not allowed. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.37 | QoSPPCfg_2_IPXOrderOfMatch | 0 | 0 | This parameter specifies the order of searching the configured IP/IPX traffic flows in this profile to find a match. The packet … |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.38 | QoSPPCfg_2_TBHigherLayerProtocol | 0 | 0 | This specifies the higher layer protocol being bridged. All flows corresponding to this higher layer protocol in this profile wi… |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.39 | QoSPPCfg_2_TrafficClass | 0 | 0 | This parameter specifies the class to be associated with this traffic flow. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.40 | QoSPPCfg_3_ProtocolType | 0 | 0 | This parameter identifies the protocol family. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.41 | QoSPPCfg_3_IPPrecedenceOption | 0 | 0 | This parameter specifies how the IP precedence has to be treated. NONE - Ignore IP Precedence. SET - Set the IP Precedence. MATCH … |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.42 | QoSPPCfg_3_IncomingIPPrecedence | 0 | 0 | This parameter specifies the IP Precedence to be matched in the IP packet for servicing. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.43 | QoSPPCfg_3_OutgoingIPPrecedence | 0 | 0 | This parameter specifies the IP Precedence to be set in the IP packet after it is serviced. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.44 | QoSPPCfg_3_SourceIPAddress | 0 | 0 | This parameter specifies the address for comparing with the source IP address of the incoming packet. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.45 | QoSPPCfg_3_SourceIPAddressMask | 0 | 0 | This parameter specifies the Address Mask for the Source IP Address and has to be mandatorily configured when a valid Source IP … |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.46 | QoSPPCfg_3_DestinationIPAddress | 0 | 0 | This parameter specifies the address for comparing with the destination IP address of the incoming packet. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.47 | QoSPPCfg_3_DestinationIPAddressMask | 0 | 0 | This parameter specifies the Address Mask for the Destination IP Address and has to be mandatorily configured when a valid Desti… |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.48 | QoSPPCfg_3_IPProtocolNumber | 0 | 0 | This parameter specifies the protocol to be compared with that of the incoming packet. For example, 1 for ICMP, 6 for TCP, 17 fo… |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.49 | QoSPPCfg_3_IPSourcePortNumber | 0 | 0 | This parameter specifies a specific or a range of source ports to be compared with that of the incoming TCP/UDP packet. For exam… |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.50 | QoSPPCfg_3_IPDestinationPortNumber | 0 | 0 | This parameter specifies a specific or a range of destination ports to be compared with that of the incoming TCP/UDP packet. For… |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.51 | QoSPPCfg_3_IPOrderOfMatch | 0 | 0 | This parameter specifies the order of searching the configured IP/IPX traffic flows in this profile to find a match. The packet … |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.52 | QoSPPCfg_3_IPXDestinationNetwork | 0 | 0 | This is the network number of the network to which the destination node belongs. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.53 | QoSPPCfg_3_IPXDestinationNode | 0 | 0 | This value is the physical address of the destination node. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.54 | QoSPPCfg_3_IPXPacketType | 0 | 0 | This indicates the type of service offered or required by the IPX packet. packet types 1 and 4 are not allowed. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.55 | QoSPPCfg_3_IPXSocketNumber | 0 | 0 | This is the socket address of the packet's destination and source process. sockets 0x452 and 0x453 are not allowed. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.56 | QoSPPCfg_3_IPXOrderOfMatch | 0 | 0 | This parameter specifies the order of searching the configured IP/IPX traffic flows in this profile to find a match. The packet … |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.57 | QoSPPCfg_3_TBHigherLayerProtocol | 0 | 0 | This specifies the higher layer protocol being bridged. All flows corresponding to this higher layer protocol in this profile wi… |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.58 | QoSPPCfg_3_TrafficClass | 0 | 0 | This parameter specifies the class to be associated with this traffic flow. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.59 | QoSPPCfg_4_ProtocolType | 0 | 0 | This parameter identifies the protocol family. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.60 | QoSPPCfg_4_IPPrecedenceOption | 0 | 0 | This parameter specifies how the IP precedence has to be treated. NONE - Ignore IP Precedence. SET - Set the IP Precedence. MATCH … |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.61 | QoSPPCfg_4_IncomingIPPrecedence | 0 | 0 | This parameter specifies the IP Precedence to be matched in the IP packet for servicing. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.62 | QoSPPCfg_4_OutgoingIPPrecedence | 0 | 0 | This parameter specifies the IP Precedence to be set in the IP packet after it is serviced. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.63 | QoSPPCfg_4_SourceIPAddress | 0 | 0 | This parameter specifies the address for comparing with the source IP address of the incoming packet. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.64 | QoSPPCfg_4_SourceIPAddressMask | 0 | 0 | This parameter specifies the Address Mask for the Source IP Address and has to be mandatorily configured when a valid Source IP … |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.65 | QoSPPCfg_4_DestinationIPAddress | 0 | 0 | This parameter specifies the address for comparing with the destination IP address of the incoming packet. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.67 | QoSPPCfg_4_IPProtocolNumber | 0 | 0 | This parameter specifies the protocol to be compared with that of the incoming packet. For example, 1 for ICMP, 6 for TCP, 17 fo… |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.68 | QoSPPCfg_4_IPSourcePortNumber | 0 | 0 | This parameter specifies a specific or a range of source ports to be compared with that of the incoming TCP/UDP packet. For exam… |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.69 | QoSPPCfg_4_IPDestinationPortNumber | 0 | 0 | This parameter specifies a specific or a range of destination ports to be compared with that of the incoming TCP/UDP packet. For… |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.70 | QoSPPCfg_4_IPOrderOfMatch | 0 | 0 | This parameter specifies the order of searching the configured IP/IPX traffic flows in this profile to find a match. The packet … |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.71 | QoSPPCfg_4_IPXDestinationNetwork | 0 | 0 | This is the network number of the network to which the destination node belongs. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.72 | QoSPPCfg_4_IPXDestinationNode | 0 | 0 | This value is the physical address of the destination node. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.73 | QoSPPCfg_4_IPXPacketType | 0 | 0 | This indicates the type of service offered or required by the IPX packet. packet types 1 and 4 are not allowed. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.74 | QoSPPCfg_4_IPXSocketNumber | 0 | 0 | This is the socket address of the packet's destination and source process. sockets 0x452 and 0x453 are not allowed. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.75 | QoSPPCfg_4_IPXOrderOfMatch | 0 | 0 | This parameter specifies the order of searching the configured IP/IPX traffic flows in this profile to find a match. The packet … |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.76 | QoSPPCfg_4_TBHigherLayerProtocol | 0 | 0 | This specifies the higher layer protocol being bridged. All flows corresponding to this higher layer protocol in this profile wi… |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.77 | QoSPPCfg_4_TrafficClass | 0 | 0 | This parameter specifies the class to be associated with this traffic flow. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.78 | QoSPPCfg_5_ProtocolType | 0 | 0 | This parameter identifies the protocol family. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.79 | QoSPPCfg_5_IPPrecedenceOption | 0 | 0 | This parameter specifies how the IP precedence has to be treated. NONE - Ignore IP Precedence. SET - Set the IP Precedence. MATCH … |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.80 | QoSPPCfg_5_IncomingIPPrecedence | 0 | 0 | This parameter specifies the IP Precedence to be matched in the IP packet for servicing. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.81 | QoSPPCfg_5_OutgoingIPPrecedence | 0 | 0 | This parameter specifies the IP Precedence to be set in the IP packet after it is serviced. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.82 | QoSPPCfg_5_SourceIPAddress | 0 | 0 | This parameter specifies the address for comparing with the source IP address of the incoming packet. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.83 | QoSPPCfg_5_SourceIPAddressMask | 0 | 0 | This parameter specifies the Address Mask for the Source IP Address and has to be mandatorily configured when a valid Source IP … |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.84 | QoSPPCfg_5_DestinationIPAddress | 0 | 0 | This parameter specifies the address for comparing with the destination IP address of the incoming packet. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.85 | QoSPPCfg_5_DestinationIPAddressMask | 0 | 0 | This parameter specifies the Address Mask for the Destination IP Address and has to be mandatorily configured when a valid Desti… |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.86 | QoSPPCfg_5_IPProtocolNumber | 0 | 0 | This parameter specifies the protocol to be compared with that of the incoming packet. For example, 1 for ICMP, 6 for TCP, 17 fo… |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.87 | QoSPPCfg_5_IPSourcePortNumber | 0 | 0 | This parameter specifies a specific or a range of source ports to be compared with that of the incoming TCP/UDP packet. For exam… |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.88 | QoSPPCfg_5_IPDestinationPortNumber | 0 | 0 | This parameter specifies a specific or a range of destination ports to be compared with that of the incoming TCP/UDP packet. For… |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.89 | QoSPPCfg_5_IPOrderOfMatch | 0 | 0 | This parameter specifies the order of searching the configured IP/IPX traffic flows in this profile to find a match. The packet … |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.90 | QoSPPCfg_5_IPXDestinationNetwork | 0 | 0 | This is the network number of the network to which the destination node belongs. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.91 | QoSPPCfg_5_IPXDestinationNode | 0 | 0 | This value is the physical address of the destination node. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.92 | QoSPPCfg_5_IPXPacketType | 0 | 0 | This indicates the type of service offered or required by the IPX packet. packet types 1 and 4 are not allowed. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.93 | QoSPPCfg_5_IPXSocketNumber | 0 | 0 | This is the socket address of the packet's destination and source process. sockets 0x452 and 0x453 are not allowed. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.94 | QoSPPCfg_5_IPXOrderOfMatch | 0 | 0 | This parameter specifies the order of searching the configured IP/IPX traffic flows in this profile to find a match. The packet … |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.95 | QoSPPCfg_5_TBHigherLayerProtocol | 0 | 0 | This specifies the higher layer protocol being bridged. All flows corresponding to this higher layer protocol in this profile wi… |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.96 | QoSPPCfg_5_TrafficClass | 0 | 0 | This parameter specifies the class to be associated with this traffic flow. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.97 | QoSPPCfg_6_ProtocolType | 0 | 0 | This parameter identifies the protocol family. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.98 | QoSPPCfg_6_IPPrecedenceOption | 0 | 0 | This parameter specifies how the IP precedence has to be treated. NONE - Ignore IP Precedence. SET - Set the IP Precedence. MATCH … |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.99 | QoSPPCfg_6_IncomingIPPrecedence | 0 | 0 | This parameter specifies the IP Precedence to be matched in the IP packet for servicing. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.100 | QoSPPCfg_6_OutgoingIPPrecedence | 0 | 0 | This parameter specifies the IP Precedence to be set in the IP packet after it is serviced. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.101 | QoSPPCfg_6_SourceIPAddress | 0 | 0 | This parameter specifies the address for comparing with the source IP address of the incoming packet. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.102 | QoSPPCfg_6_SourceIPAddressMask | 0 | 0 | This parameter specifies the Address Mask for the Source IP Address and has to be mandatorily configured when a valid Source IP … |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.103 | QoSPPCfg_6_DestinationIPAddress | 0 | 0 | This parameter specifies the address for comparing with the destination IP address of the incoming packet. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.104 | QoSPPCfg_6_DestinationIPAddressMask | 0 | 0 | This parameter specifies the Address Mask for the Destination IP Address and has to be mandatorily configured when a valid Desti… |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.105 | QoSPPCfg_6_IPProtocolNumber | 0 | 0 | This parameter specifies the protocol to be compared with that of the incoming packet. For example, 1 for ICMP, 6 for TCP, 17 fo… |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.106 | QoSPPCfg_6_IPSourcePortNumber | 0 | 0 | This parameter specifies a specific or a range of source ports to be compared with that of the incoming TCP/UDP packet. For exam… |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.107 | QoSPPCfg_6_IPDestinationPortNumber | 0 | 0 | This parameter specifies a specific or a range of destination ports to be compared with that of the incoming TCP/UDP packet. For… |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.108 | QoSPPCfg_6_IPOrderOfMatch | 0 | 0 | This parameter specifies the order of searching the configured IP/IPX traffic flows in this profile to find a match. The packet … |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.109 | QoSPPCfg_6_IPXDestinationNetwork | 0 | 0 | This is the network number of the network to which the destination node belongs. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.110 | QoSPPCfg_6_IPXDestinationNode | 0 | 0 | This value is the physical address of the destination node. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.111 | QoSPPCfg_6_IPXPacketType | 0 | 0 | This indicates the type of service offered or required by the IPX packet. packet types 1 and 4 are not allowed. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.112 | QoSPPCfg_6_IPXSocketNumber | 0 | 0 | This is the socket address of the packet's destination and source process. sockets 0x452 and 0x453 are not allowed. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.113 | QoSPPCfg_6_IPXOrderOfMatch | 0 | 0 | This parameter specifies the order of searching the configured IP/IPX traffic flows in this profile to find a match. The packet … |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.114 | QoSPPCfg_6_TBHigherLayerProtocol | 0 | 0 | This specifies the higher layer protocol being bridged. All flows corresponding to this higher layer protocol in this profile wi… |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.115 | QoSPPCfg_6_TrafficClass | 0 | 0 | This parameter specifies the class to be associated with this traffic flow. |
1.3.6.1.4.1.449.2.1.2.2.30.1.2.1.116 | QoSPPCfg_7_ProtocolType | 0 | 0 | This parameter identifies the protocol family. |
... |