Port State indicates what the port is actually in the
process of doing. This value may be one of :
INACTIVE - H/TPAD port inactive entered during boot
WTPOLSERVE - TPAD is waiting for response to a poll
WTSELRESP - TPAD is waiting for the response to a
select
WTDATARESP - H/TPAD is waiting for data to be
acknowledged
DATA - H/TPAD is in the process of sending/receiving
data
SEL/POL - TPAD is about to select or poll a
controller. This is the most common state
for a TPAD
SELECT - TPAD is about to select a device
POLL - TPAD is about to poll a device
WTENQRESP - H/TPAD is waiting for a NAK response to
an ENQ sent
IDLE - HPAD is waiting for the host to send commands.
This is the most common state of the HPAD
WTEOT - HPAD is waiting for an expected EOT from the
host
FLUSHINGDATA - HPAD encountered an error in the message
received from the host. As a result,
the data is being flushed
WTLCM - HPAD received a read/modify and is waiting for
the response from the TPAD.
Parsed from file vanguard-65xx-bsc3270.mib.txt
Company: None
Module: BSC3270-OPT-MIB
Port State indicates what the port is actually in the
process of doing. This value may be one of :
INACTIVE - H/TPAD port inactive entered during boot
WTPOLSERVE - TPAD is waiting for response to a poll
WTSELRESP - TPAD is waiting for the response to a
select
WTDATARESP - H/TPAD is waiting for data to be
acknowledged
DATA - H/TPAD is in the process of sending/receiving
data
SEL/POL - TPAD is about to select or poll a
controller. This is the most common state
for a TPAD
SELECT - TPAD is about to select a device
POLL - TPAD is about to poll a device
WTENQRESP - H/TPAD is waiting for a NAK response to
an ENQ sent
IDLE - HPAD is waiting for the host to send commands.
This is the most common state of the HPAD
WTEOT - HPAD is waiting for an expected EOT from the
host
FLUSHINGDATA - HPAD encountered an error in the message
received from the host. As a result,
the data is being flushed
WTLCM - HPAD received a read/modify and is waiting for
the response from the TPAD.
Parsed from file BSC3270-OPT-MIB.mib
Module: BSC3270-OPT-MIB
Vendor: Codex
Module: BSC3270-OPT-MIB
[Automatically extracted from oidview.com]
cdx6500BSC3270PortState OBJECT-TYPE SYNTAX DisplayString (SIZE(4..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Port State indicates what the port is actually in the process of doing. This value may be one of : INACTIVE - H/TPAD port inactive entered during boot WTPOLSERVE - TPAD is waiting for response to a poll WTSELRESP - TPAD is waiting for the response to a select WTDATARESP - H/TPAD is waiting for data to be acknowledged DATA - H/TPAD is in the process of sending/receiving data SEL/POL - TPAD is about to select or poll a controller. This is the most common state for a TPAD SELECT - TPAD is about to select a device POLL - TPAD is about to poll a device WTENQRESP - H/TPAD is waiting for a NAK response to an ENQ sent IDLE - HPAD is waiting for the host to send commands. This is the most common state of the HPAD WTEOT - HPAD is waiting for an expected EOT from the host FLUSHINGDATA - HPAD encountered an error in the message received from the host. As a result, the data is being flushed WTLCM - HPAD received a read/modify and is waiting for the response from the TPAD." ::= { cdx6500PPSTBSC3270PortEntry 3 }
cdx6500BSC3270PortState OBJECT-TYPE SYNTAX DisplayString (SIZE(4..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Port State indicates what the port is actually in the process of doing. This value may be one of : INACTIVE - H/TPAD port inactive entered during boot WTPOLSERVE - TPAD is waiting for response to a poll WTSELRESP - TPAD is waiting for the response to a select WTDATARESP - H/TPAD is waiting for data to be acknowledged DATA - H/TPAD is in the process of sending/receiving data SEL/POL - TPAD is about to select or poll a controller. This is the most common state for a TPAD SELECT - TPAD is about to select a device POLL - TPAD is about to poll a device WTENQRESP - H/TPAD is waiting for a NAK response to an ENQ sent IDLE - HPAD is waiting for the host to send commands. This is the most common state of the HPAD WTEOT - HPAD is waiting for an expected EOT from the host FLUSHINGDATA - HPAD encountered an error in the message received from the host. As a result, the data is being flushed WTLCM - HPAD received a read/modify and is waiting for the response from the TPAD." ::= { cdx6500PPSTBSC3270PortEntry 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.449.2.1.3.1.1.10.1.1 | cdx6500BSC3270StatPortNumber | 0 | 0 | The BSC3270 port number described by this entry. |
1.3.6.1.4.1.449.2.1.3.1.1.10.1.2 | cdx6500BSC3270PortStatus | 0 | 0 | Port Status indicates whether or not the port is switched on and is ready for operation. This value may be one of : up - Por… |
1.3.6.1.4.1.449.2.1.3.1.1.10.1.4 | cdx6500BSC3270PortSpeed | 0 | 0 | This is the speed of the port if clock is internal. If clock is external, this is the detected clock speed. If Port Speed is 0, c… |
1.3.6.1.4.1.449.2.1.3.1.1.10.1.5 | cdx6500BSC3270PortUtilIn | 0 | 0 | Pertcentage of Port input bandwidth in use. |
1.3.6.1.4.1.449.2.1.3.1.1.10.1.6 | cdx6500BSC3270PortUtilOut | 0 | 0 | Pertcentage of Port output bandwidth in use. |
1.3.6.1.4.1.449.2.1.3.1.1.10.1.7 | cdx6500BSC3270InMsgs | 0 | 0 | Number of message received since last node, port, or statistics reset. |
1.3.6.1.4.1.449.2.1.3.1.1.10.1.8 | cdx6500BSC3270OutMsgs | 0 | 0 | Number of message sent since last node, port, or statistics reset. |
1.3.6.1.4.1.449.2.1.3.1.1.10.1.9 | cdx6500BSC3270InChars | 0 | 0 | Number of characters received since last node, port, or statistics reset. |
1.3.6.1.4.1.449.2.1.3.1.1.10.1.10 | cdx6500BSC3270OutChars | 0 | 0 | Number of characters sent since last node, port, or statistics reset. |
1.3.6.1.4.1.449.2.1.3.1.1.10.1.11 | cdx6500BSC3270CharRateIn | 0 | 0 | Number of characters received per second. |
1.3.6.1.4.1.449.2.1.3.1.1.10.1.12 | cdx6500BSC3270CharRateOut | 0 | 0 | Number of characters sent per second. |
1.3.6.1.4.1.449.2.1.3.1.1.10.1.13 | cdx6500BSC3270CrcBccErrs | 0 | 0 | Number of CRC errors since last node, port, or statistics reset. |
1.3.6.1.4.1.449.2.1.3.1.1.10.1.14 | cdx6500BSC3270InPosAcks | 0 | 0 | Number of ACKs received since last node, port, or statistics reset. |
1.3.6.1.4.1.449.2.1.3.1.1.10.1.15 | cdx6500BSC3270OutPosAcks | 0 | 0 | Number of ACKs sent since last node, port, or statistics reset. |
1.3.6.1.4.1.449.2.1.3.1.1.10.1.16 | cdx6500BSC3270InNegAcks | 0 | 0 | Number of NAKs received since last node, port, or statistics reset. |
1.3.6.1.4.1.449.2.1.3.1.1.10.1.17 | cdx6500BSC3270OutNegAcks | 0 | 0 | Number of NAKs sent since last node, port, or statistics reset. |
1.3.6.1.4.1.449.2.1.3.1.1.10.1.18 | cdx6500BSC3270MsgRateIn | 0 | 0 | Number of messages received per second. |
1.3.6.1.4.1.449.2.1.3.1.1.10.1.19 | cdx6500BSC3270MsgRateOut | 0 | 0 | Number of messages sent per second. |
1.3.6.1.4.1.449.2.1.3.1.1.10.1.20 | cdx6500BSC3270InEnq | 0 | 0 | Number of ENQs received since last node, port, or statistics reset. |
1.3.6.1.4.1.449.2.1.3.1.1.10.1.21 | cdx6500BSC3270OutEnq | 0 | 0 | Number of ENQs sent since last node, port, or statistics reset. |
1.3.6.1.4.1.449.2.1.3.1.1.10.1.22 | cdx6500BSC3270NumRetran | 0 | 0 | Number of messages retransmitted since last node, port, or statistics reset. |