Last clear diagnostic code
none - No more information
bps - Invalid P(S)
bpr - Invalid P(R)
ptinv - Packet type invalid
pna - Packet not allowed
psh - Packet too short
pln - Packet too long
tout - Timer expired
tcli - Timer expired for clear indication
nocs - Call set-up problem
nofc - Facility/registration code not allowed
nofp - Facility/registration parameter not allowed
cald - Bad called address
cali - Bad calling address
invfl - Invalid facilities length
icb - Incoming call barred
nolcn - No logical channel available
cco - Call collision occurred
dupl - Duplicate facility requested
nadl - Non-zero address length
nfcl - Non-zero facility length
nfce - Facility not found when expected
trp - Temporary routing problem
clin - Call limit reached on intermediate node
cldn - Call limit reached on destination node
ncil - No logical channel available on internode link
ccpo - Call cleared by Control Port operator
csld - Call setup looping detected
cshe - Call setup hop count exceeded
finl - Failure on intermediate node link
rin3 - Restart received at level 3
disc - DISC received at level 2
dm - DM received at level 2
sabm - SABM received at level 2
frmr - FRMR received at level 2
invnr - Invalid N(R)
unsf - Unsolicited F bit received
ucmd - Unknown command received
uresp - Unknown response received
gtcap - I field too long
t1to - T1/N2 timeout
frlen - Received frame of incorrect size
aderr - Address error
spbo - Source port is in Busy Out state
dpbo - Destination port is in Busy Out state
srr - Session reconnection rejected.
Parsed from file vanguard-65xx-tcop.mib.txt
Company: None
Module: TCOP-OPT-MIB
Last clear diagnostic code
none - No more information
bps - Invalid P(S)
bpr - Invalid P(R)
ptinv - Packet type invalid
pna - Packet not allowed
psh - Packet too short
pln - Packet too long
tout - Timer expired
tcli - Timer expired for clear indication
nocs - Call set-up problem
nofc - Facility/registration code not allowed
nofp - Facility/registration parameter not allowed
cald - Bad called address
cali - Bad calling address
invfl - Invalid facilities length
icb - Incoming call barred
nolcn - No logical channel available
cco - Call collision occurred
dupl - Duplicate facility requested
nadl - Non-zero address length
nfcl - Non-zero facility length
nfce - Facility not found when expected
trp - Temporary routing problem
clin - Call limit reached on intermediate node
cldn - Call limit reached on destination node
ncil - No logical channel available on internode link
ccpo - Call cleared by Control Port operator
csld - Call setup looping detected
cshe - Call setup hop count exceeded
finl - Failure on intermediate node link
rin3 - Restart received at level 3
disc - DISC received at level 2
dm - DM received at level 2
sabm - SABM received at level 2
frmr - FRMR received at level 2
invnr - Invalid N(R)
unsf - Unsolicited F bit received
ucmd - Unknown command received
uresp - Unknown response received
gtcap - I field too long
t1to - T1/N2 timeout
frlen - Received frame of incorrect size
aderr - Address error
spbo - Source port is in Busy Out state
dpbo - Destination port is in Busy Out state
srr - Session reconnection rejected.
Parsed from file TCOP-OPT-MIB.mib
Module: TCOP-OPT-MIB
Vendor: Codex
Module: TCOP-OPT-MIB
[Automatically extracted from oidview.com]
cdx6500TCOPStatAutoCallLastClearDiagnosis OBJECT-TYPE SYNTAX INTEGER { none (1), bps (2), bpr (3), ptinv (4), pna (5), psh (6), pln (7), tout (8), tcli (9), nocs (10), nofc (11), nofp (12), cald (13), cali (14), invfl (15), icb (16), nolcn (17), cco (18), dupl (19), nadl (20), nfcl (21), nfce (22), trp (23), clin (24), cldn (25), ncil (26), ccpo (27), csld (28), cshe (29), finl (30), rin3 (31), disc (32), dm (33), sabm (34), frmr (35), invnr (36), unsf (37), ucmd (38), uresp (39), gtcap (40), t1to (41), frlen (42), aderr (43), spbo (44), dpbo (45), srr (46) } ACCESS read-only STATUS mandatory DESCRIPTION "Last clear diagnostic code none - No more information bps - Invalid P(S) bpr - Invalid P(R) ptinv - Packet type invalid pna - Packet not allowed psh - Packet too short pln - Packet too long tout - Timer expired tcli - Timer expired for clear indication nocs - Call set-up problem nofc - Facility/registration code not allowed nofp - Facility/registration parameter not allowed cald - Bad called address cali - Bad calling address invfl - Invalid facilities length icb - Incoming call barred nolcn - No logical channel available cco - Call collision occurred dupl - Duplicate facility requested nadl - Non-zero address length nfcl - Non-zero facility length nfce - Facility not found when expected trp - Temporary routing problem clin - Call limit reached on intermediate node cldn - Call limit reached on destination node ncil - No logical channel available on internode link ccpo - Call cleared by Control Port operator csld - Call setup looping detected cshe - Call setup hop count exceeded finl - Failure on intermediate node link rin3 - Restart received at level 3 disc - DISC received at level 2 dm - DM received at level 2 sabm - SABM received at level 2 frmr - FRMR received at level 2 invnr - Invalid N(R) unsf - Unsolicited F bit received ucmd - Unknown command received uresp - Unknown response received gtcap - I field too long t1to - T1/N2 timeout frlen - Received frame of incorrect size aderr - Address error spbo - Source port is in Busy Out state dpbo - Destination port is in Busy Out state srr - Session reconnection rejected." ::= { cdx6500PPSTTCOPPortEntry 30 }
cdx6500TCOPStatAutoCallLastClearDiagnosis OBJECT-TYPE SYNTAX INTEGER { none (1), bps (2), bpr (3), ptinv (4), pna (5), psh (6), pln (7), tout (8), tcli (9), nocs (10), nofc (11), nofp (12), cald (13), cali (14), invfl (15), icb (16), nolcn (17), cco (18), dupl (19), nadl (20), nfcl (21), nfce (22), trp (23), clin (24), cldn (25), ncil (26), ccpo (27), csld (28), cshe (29), finl (30), rin3 (31), disc (32), dm (33), sabm (34), frmr (35), invnr (36), unsf (37), ucmd (38), uresp (39), gtcap (40), t1to (41), frlen (42), aderr (43), spbo (44), dpbo (45), srr (46) } ACCESS read-only STATUS mandatory DESCRIPTION "Last clear diagnostic code none - No more information bps - Invalid P(S) bpr - Invalid P(R) ptinv - Packet type invalid pna - Packet not allowed psh - Packet too short pln - Packet too long tout - Timer expired tcli - Timer expired for clear indication nocs - Call set-up problem nofc - Facility/registration code not allowed nofp - Facility/registration parameter not allowed cald - Bad called address cali - Bad calling address invfl - Invalid facilities length icb - Incoming call barred nolcn - No logical channel available cco - Call collision occurred dupl - Duplicate facility requested nadl - Non-zero address length nfcl - Non-zero facility length nfce - Facility not found when expected trp - Temporary routing problem clin - Call limit reached on intermediate node cldn - Call limit reached on destination node ncil - No logical channel available on internode link ccpo - Call cleared by Control Port operator csld - Call setup looping detected cshe - Call setup hop count exceeded finl - Failure on intermediate node link rin3 - Restart received at level 3 disc - DISC received at level 2 dm - DM received at level 2 sabm - SABM received at level 2 frmr - FRMR received at level 2 invnr - Invalid N(R) unsf - Unsolicited F bit received ucmd - Unknown command received uresp - Unknown response received gtcap - I field too long t1to - T1/N2 timeout frlen - Received frame of incorrect size aderr - Address error spbo - Source port is in Busy Out state dpbo - Destination port is in Busy Out state srr - Session reconnection rejected." ::= { cdx6500PPSTTCOPPortEntry 30 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.449.2.1.3.1.1.24.1.1 | cdx6500TCOPStatPortNumber | 0 | 0 | The port number for this TCOP entry. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.2 | cdx6500TCOPStatPortType | 0 | 0 | The configured value of the Port Type. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.3 | cdx6500TCOPStatPortSubtype | 0 | 0 | Access protocol for this port. hsc3 - Transparent Hitachi type gnet - Transparent GNET type. uts - Transparent Uniscope type. slc… |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.4 | cdx6500TCOPStatPortStatus | 0 | 0 | Status of this port: Up : Port is enabled Down : Port is Inactive Disabled : Port is disabled. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.5 | cdx6500TCOPStatPortState | 0 | 0 | Current port state: discPhase - Disconnect phase, no call in place callingPhase - Port has initiated Autocall calledPhase - Po… |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.6 | cdx6500TCOPStatPortSpeed | 0 | 0 | The measured port speed in bits per second. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.7 | cdx6500TCOPStatPortUtilIn | 0 | 0 | Percentage of port bandwidth in use. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.8 | cdx6500TCOPStatPortUtilOut | 0 | 0 | Percentage of port bandwidth in use. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.9 | cdx6500TCOPStatPortOverrunErrs | 0 | 0 | Total number of overrun errors counted by the I/O driver since the last node or statistics reset. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.10 | cdx6500TCOPStatPortUnderrunErrs | 0 | 0 | Total number of underrun errors counted by the I/O driver since the last node or statistics reset. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.11 | cdx6500TCOPStatPortBCCErrs | 0 | 0 | Total number of CRC errors counted by the I/O driver since the last node or statistics reset. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.12 | cdx6500TCOPStatPortParityErrs | 0 | 0 | Total number of parity errors counted by the I/O driver since the last node or statistics reset. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.13 | cdx6500TCOPStatPortInChars | 0 | 0 | Number of characters received since last node, port or statistics reset. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.14 | cdx6500TCOPStatPortOutChars | 0 | 0 | Number of characters sent since last node, port or statistics reset. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.15 | cdx6500TCOPStatPortInCharsRate | 0 | 0 | Average number of characters received per second since last node, port or statistics reset. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.16 | cdx6500TCOPStatPortOutCharsRate | 0 | 0 | Average number of characters sent per second since last node, port or statistics reset. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.17 | cdx6500TCOPStatPortInMessages | 0 | 0 | Number of messages received since last node, port or statistics reset. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.18 | cdx6500TCOPStatPortOutMessages | 0 | 0 | Number of messages sent since last node, port or statistics reset. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.19 | cdx6500TCOPStatPortInMessagesRate | 0 | 0 | Average number of messages received per second since last node, port or statistics reset. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.20 | cdx6500TCOPStatPortOutMessagesRate | 0 | 0 | Average number of messages sent per second since last node, port or statistics reset. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.21 | cdx6500TCOPStatPortInPktsQueued | 0 | 0 | Number of received packets which are currently queued. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.22 | cdx6500TCOPStatPortOutPktsQueued | 0 | 0 | Number of packets currently queued which are to be sent. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.23 | cdx6500TCOPStatPortMaxInQueueLength | 0 | 0 | The maximum queue length reached for incoming packets since the last reset. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.24 | cdx6500TCOPStatPortMaxOutQueueLength | 0 | 0 | The maximum queue length reached since the last reset, for packets to be sent. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.25 | cdx6500TCOPStatPortPktQueueFlushCount | 0 | 0 | The number of times the receive queue is flushed. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.26 | cdx6500TCOPStatAutoCallStatus | 0 | 0 | Current status of the autocall. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.27 | cdx6500TCOPStatAutoCallNextAttempt | 0 | 0 | Time in seconds until next autocall attempt. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.28 | cdx6500TCOPStatAutoCallAttemptCount | 0 | 0 | Number of autocall attempts. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.29 | cdx6500TCOPStatAutoCallLastClearCause | 0 | 0 | Last autocall clear cause code dte - Cleared by other end np - Destination not obtainable occ - Called number busy nc - Network c… |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.31 | cdx6500TCOPStatAutoCallLastInCalledAddress | 0 | 0 | X25 called address in BCD format of last inbound call. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.32 | cdx6500TCOPStatAutoCallLastInCallingAddress | 0 | 0 | X25 calling address in BCD format of last inbound call. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.33 | cdx6500TCOPStatAutoCallLastInCallFacilities | 0 | 0 | X25 facilities of inbound call. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.34 | cdx6500TCOPStatAutoCallLastInCallCUD | 0 | 0 | X25 Call User Data of inbound call. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.35 | cdx6500TCOPStatAutoCallLastOutCalledAddress | 0 | 0 | X25 called address in BCD format of last outbound call. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.36 | cdx6500TCOPStatAutoCallLastOutCallingAddress | 0 | 0 | X25 calling address in BCD format of last outbound call. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.37 | cdx6500TCOPStatAutoCallLastOutCallFacilities | 0 | 0 | X25 facilities of outbound call. |
1.3.6.1.4.1.449.2.1.3.1.1.24.1.38 | cdx6500TCOPStatAutoCallLastOutCallCUD | 0 | 0 | X25 Call User Data of outbound call. |