A conceptual row for this table.
Entries are created by either management operations or
other M-CMTS applications or interfaces (e.g., ERMI), the
persistence of an entry is indicated in
docsIfMCmtsDepiSessionConfigStorage.
The DEPI connection mechanism using L2TPv3 is initiated
when an entry in this table is set to active. The
following conditions apply:
o If the M-CMTS L2TPv3 Control Connection with the remote
EQAM Host IP in docsIfMCmtsDepiSessionConfigRemoteAddr
does not exist, a DEPI L2TPv3 control Connection is
created.
o There may be cases where the control plane with the EQAM
IP host exists or is in progress, (e.g., a previously
created entry with same EQAM IP host), thus the M-CMTS
MUST avoid multiple L2TP Control Connection State
machines.
o DEPI L2TPv3 sessions are created based on the TSID
value. Only the first entry with row status 'active'
with a particular TSID value will try to establish a
L2TPv3 session. Other entries with same TSID value
return state of 'depiSessionError' in
docsIfMCmtsDepiSessionInfoState.
Relationships with the DOCSIS MAC domain IfStackTable:
This control considers the ability of the M-CMTS to use a
manager-specified Downstream interface value
for the configuration of the DOCSIS MAC domain downstream
interfaces of the M-CMTS architecture.
o When docsIfMCmtsDepiSessionConfigCableDownstreamIfIndex
is a non-zero value the value of
docsIfMCmtsDepiSessionConfigCableMacLayerIfIndex MUST be
an existing DOCSIS MAC layer interface.
o If an entry in this table already exists for the specified
docsIfMCmtsDepiSessionConfigCableDownstreamIfIndex,
or corresponds to an ifIndex signaled as
'integrated' in docsIfMCmtsDownstreamType a
newly created entry set to active is rejected and
reported in docsIfMCmtsDepiSessionInfoState as
'invalidDSInterfaceValue'.
o The M-CMTS accepts or rejects the creation of a new
table entry based on the possibility of adding a new
Downstream interface to the MAC domain. On success it
is reported in docsIfMCmtsDownstreamType as
'depiSession'.
Relationship with M-CMTS Downstream Interface tables:
Setting an entry to active creates or updates (when
docsIfMCmtsDepiSessionConfigCableMCmtsDownIfIndex is
provided in the row creation; see the object description
for details) the corresponding entry in the following
tables:
ifTable,
docsIfDownstreamChannelTable,
docsIfMCmtsCoreDownstreamTable/
docsIfMCmtsEqamDownstreamTable,
docsIfMCmtsCoreDownstreamTable,
docsIfMCmtsDepiSessionInfoTable, and
docsIfMCmtsDepiSessionStatsTable
In the EQAM device this table is normally created by the
M-CMTS Core initiated DEPI session, although manual
configuration may be supported, with the difference that
EQAM devices are not required to initiate DEPI sessions.
EQAM device Operation of configured entries is not
detailed in this MIB module.
A conceptual row for this table.
Entries are created by either management operations or
other M-CMTS applications or interfaces (e.g., ERMI), the
persistence of an entry is indicated in
docsIfMCmtsDepiSessionConfigStorage.
The DEPI connection mechanism using L2TPv3 is initiated
when an entry in this table is set to active. The
following conditions apply:
o If the M-CMTS L2TPv3 Control Connection with the remote
EQAM Host IP in docsIfMCmtsDepiSessionConfigRemoteAddr
does not exist, a DEPI L2TPv3 control Connection is
created.
o There may be cases where the control plane with the EQAM
IP host exists or is in progress, (e.g., a previously
created entry with same EQAM IP host), thus the M-CMTS
MUST avoid multiple L2TP Control Connection State
machines.
o DEPI L2TPv3 sessions are created based on the TSID
value. Only the first entry with row status 'active'
with a particular TSID value will try to establish a
L2TPv3 session. Other entries with same TSID value
return state of 'depiSessionError' in
docsIfMCmtsDepiSessionInfoState.
Relationships with the DOCSIS MAC domain IfStackTable:
This control considers the ability of the M-CMTS to use a
manager-specified Downstream interface value
for the configuration of the DOCSIS MAC domain downstream
interfaces of the M-CMTS architecture.
o When docsIfMCmtsDepiSessionConfigCableDownstreamIfIndex
is a non-zero value the value of
docsIfMCmtsDepiSessionConfigCableMacLayerIfIndex MUST be
an existing DOCSIS MAC layer interface.
o If an entry in this table already exists for the specified
docsIfMCmtsDepiSessionConfigCableDownstreamIfIndex,
or corresponds to an ifIndex signaled as
'integrated' in docsIfMCmtsDownstreamType a
newly created entry set to active is rejected and
reported in docsIfMCmtsDepiSessionInfoState as
'invalidDSInterfaceValue'.
o The M-CMTS accepts or rejects the creation of a new
table entry based on the possibility of adding a new
Downstream interface to the MAC domain. On success it
is reported in docsIfMCmtsDownstreamType as
'depiSession'.
Relationship with M-CMTS Downstream Interface tables:
Setting an entry to active creates or updates (when
docsIfMCmtsDepiSessionConfigCableMCmtsDownIfIndex is
provided in the row creation; see the object description
for details) the corresponding entry in the following
tables:
ifTable,
docsIfDownstreamChannelTable,
docsIfMCmtsCoreDownstreamTable/
docsIfMCmtsEqamDownstreamTable,
docsIfMCmtsCoreDownstreamTable,
docsIfMCmtsDepiSessionInfoTable, and
docsIfMCmtsDepiSessionStatsTable
In the EQAM device this table is normally created by the
M-CMTS Core initiated DEPI session, although manual
configuration may be supported, with the difference that
EQAM devices are not required to initiate DEPI sessions.
EQAM device Operation of configured entries is not
detailed in this MIB module.
Parsed from file DOCS-IF-M-CMTS-MIB.my.txt
Company: None
Module: DOCS-IF-M-CMTS-MIB
A conceptual row for this table.
Entries are created by either management operations or
other M-CMTS applications or interfaces (e.g., ERMI), the
persistence of an entry is indicated in
docsIfMCmtsDepiSessionConfigStorage.
The DEPI connection mechanism using L2TPv3 is initiated
when an entry in this table is set to active. The
following conditions apply:
o If the M-CMTS L2TPv3 Control Connection with the remote
EQAM Host IP in docsIfMCmtsDepiSessionConfigRemoteAddr
does not exist, a DEPI L2TPv3 control Connection is
created.
o There may be cases where the control plane with the EQAM
IP host exists or is in progress, (e.g., a previously
created entry with same EQAM IP host), thus the M-CMTS
MUST avoid multiple L2TP Control Connection State
machines.
o DEPI L2TPv3 sessions are created based on the TSID
value. Only the first entry with row status 'active'
with a particular TSID value will try to establish a
L2TPv3 session. Other entries with same TSID value
return state of 'depiSessionError' in
docsIfMCmtsDepiSessionInfoState.
Relationships with the DOCSIS MAC domain IfStackTable:
This control considers the ability of the M-CMTS to use a
manager-specified Downstream interface value
for the configuration of the DOCSIS MAC domain downstream
interfaces of the M-CMTS architecture.
o When docsIfMCmtsDepiSessionConfigCableDownstreamIfIndex
is a non-zero value the value of
docsIfMCmtsDepiSessionConfigCableMacLayerIfIndex MUST be
an existing DOCSIS MAC layer interface.
o If an entry in this table already exists for the specified
docsIfMCmtsDepiSessionConfigCableDownstreamIfIndex,
or corresponds to an ifIndex signaled as
'integrated' in docsIfMCmtsDownstreamType a
newly created entry set to active is rejected and
reported in docsIfMCmtsDepiSessionInfoState as
'invalidDSInterfaceValue'.
o The M-CMTS accepts or rejects the creation of a new
table entry based on the possibility of adding a new
Downstream interface to the MAC domain. On success it
is reported in docsIfMCmtsDownstreamType as
'depiSession'.
Relationship with M-CMTS Downstream Interface tables:
Setting an entry to active creates or updates (when
docsIfMCmtsDepiSessionConfigCableMCmtsDownIfIndex is
provided in the row creation; see the object description
for details) the corresponding entry in the following
tables:
ifTable,
docsIfDownstreamChannelTable,
docsIfMCmtsCoreDownstreamTable/
docsIfMCmtsEqamDownstreamTable,
docsIfMCmtsCoreDownstreamTable,
docsIfMCmtsDepiSessionInfoTable, and
docsIfMCmtsDepiSessionStatsTable
In the EQAM device this table is normally created by the
M-CMTS Core initiated DEPI session, although manual
configuration may be supported, with the difference that
EQAM devices are not required to initiate DEPI sessions.
EQAM device Operation of configured entries is not
detailed in this MIB module.
docsIfMCmtsDepiSessionConfigEntry OBJECT-TYPE SYNTAX DocsIfMCmtsDepiSessionConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A conceptual row for this table. Entries are created by either management operations or other M-CMTS applications or interfaces (e.g., ERMI), the persistence of an entry is indicated in docsIfMCmtsDepiSessionConfigStorage. The DEPI connection mechanism using L2TPv3 is initiated when an entry in this table is set to active. The following conditions apply: o If the M-CMTS L2TPv3 Control Connection with the remote EQAM Host IP in docsIfMCmtsDepiSessionConfigRemoteAddr does not exist, a DEPI L2TPv3 control Connection is created. o There may be cases where the control plane with the EQAM IP host exists or is in progress, (e.g., a previously created entry with same EQAM IP host), thus the M-CMTS MUST avoid multiple L2TP Control Connection State machines. o DEPI L2TPv3 sessions are created based on the TSID value. Only the first entry with row status 'active' with a particular TSID value will try to establish a L2TPv3 session. Other entries with same TSID value return state of 'depiSessionError' in docsIfMCmtsDepiSessionInfoState. Relationships with the DOCSIS MAC domain IfStackTable: This control considers the ability of the M-CMTS to use a manager-specified Downstream interface value for the configuration of the DOCSIS MAC domain downstream interfaces of the M-CMTS architecture. o When docsIfMCmtsDepiSessionConfigCableDownstreamIfIndex is a non-zero value the value of docsIfMCmtsDepiSessionConfigCableMacLayerIfIndex MUST be an existing DOCSIS MAC layer interface. o If an entry in this table already exists for the specified docsIfMCmtsDepiSessionConfigCableDownstreamIfIndex, or corresponds to an ifIndex signaled as 'integrated' in docsIfMCmtsDownstreamType a newly created entry set to active is rejected and reported in docsIfMCmtsDepiSessionInfoState as 'invalidDSInterfaceValue'. o The M-CMTS accepts or rejects the creation of a new table entry based on the possibility of adding a new Downstream interface to the MAC domain. On success it is reported in docsIfMCmtsDownstreamType as 'depiSession'. Relationship with M-CMTS Downstream Interface tables: Setting an entry to active creates or updates (when docsIfMCmtsDepiSessionConfigCableMCmtsDownIfIndex is provided in the row creation; see the object description for details) the corresponding entry in the following tables: ifTable, docsIfDownstreamChannelTable, docsIfMCmtsCoreDownstreamTable/ docsIfMCmtsEqamDownstreamTable, docsIfMCmtsCoreDownstreamTable, docsIfMCmtsDepiSessionInfoTable, and docsIfMCmtsDepiSessionStatsTable In the EQAM device this table is normally created by the M-CMTS Core initiated DEPI session, although manual configuration may be supported, with the difference that EQAM devices are not required to initiate DEPI sessions. EQAM device Operation of configured entries is not detailed in this MIB module." INDEX { docsIfMCmtsDepiSessionConfigIndex } ::= { docsIfMCmtsDepiSessionConfigTable 1 }
Vendor: Cable Television Laboratories, Inc.
Module: DOCS-IF-M-CMTS-MIB
[Automatically extracted from oidview.com]
docsIfMCmtsDepiSessionConfigEntry OBJECT-TYPE SYNTAX DocsIfMCmtsDepiSessionConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row for this table. Entries are created by either management operations or other M-CMTS applications or interfaces (e.g., ERMI), the persistence of an entry is indicated in docsIfMCmtsDepiSessionConfigStorage. The DEPI connection mechanism using L2TPv3 is initiated when an entry in this table is set to active. The following conditions apply: o If the M-CMTS L2TPv3 Control Connection with the remote EQAM Host IP in docsIfMCmtsDepiSessionConfigRemoteAddr does not exist, a DEPI L2TPv3 control Connection is created. o There may be cases where the control plane with the EQAM IP host exists or is in progress, (e.g., a previously created entry with same EQAM IP host), thus the M-CMTS MUST avoid multiple L2TP Control Connection State machines. o DEPI L2TPv3 sessions are created based on the TSID value. Only the first entry with row status 'active' with a particular TSID value will try to establish a L2TPv3 session. Other entries with same TSID value return state of 'depiSessionError' in docsIfMCmtsDepiSessionInfoState. Relationships with the DOCSIS MAC domain IfStackTable: This control considers the ability of the M-CMTS to use a manager-specified Downstream interface value for the configuration of the DOCSIS MAC domain downstream interfaces of the M-CMTS architecture. o When docsIfMCmtsDepiSessionConfigCableDownstreamIfIndex is a non-zero value the value of docsIfMCmtsDepiSessionConfigCableMacLayerIfIndex MUST be an existing DOCSIS MAC layer interface. o If an entry in this table already exists for the specified docsIfMCmtsDepiSessionConfigCableDownstreamIfIndex, or corresponds to an ifIndex signaled as 'integrated' in docsIfMCmtsDownstreamType a newly created entry set to active is rejected and reported in docsIfMCmtsDepiSessionInfoState as 'invalidDSInterfaceValue'. o The M-CMTS accepts or rejects the creation of a new table entry based on the possibility of adding a new Downstream interface to the MAC domain. On success it is reported in docsIfMCmtsDownstreamType as 'depiSession'. Relationship with M-CMTS Downstream Interface tables: Setting an entry to active creates or updates (when docsIfMCmtsDepiSessionConfigCableMCmtsDownIfIndex is provided in the row creation; see the object description for details) the corresponding entry in the following tables: ifTable, docsIfDownstreamChannelTable, docsIfMCmtsCoreDownstreamTable/ docsIfMCmtsEqamDownstreamTable, docsIfMCmtsCoreDownstreamTable, docsIfMCmtsDepiSessionInfoTable, and docsIfMCmtsDepiSessionStatsTable In the EQAM device this table is normally created by the M-CMTS Core initiated DEPI session, although manual configuration may be supported, with the difference that EQAM devices are not required to initiate DEPI sessions. EQAM device Operation of configured entries is not detailed in this MIB module." INDEX { docsIfMCmtsDepiSessionConfigIndex } ::= { docsIfMCmtsDepiSessionConfigTable 1 }
docsIfMCmtsDepiSessionConfigEntry OBJECT-TYPE SYNTAX DocsIfMCmtsDepiSessionConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row for this table. Entries are created by either management operations or other M-CMTS applications or interfaces (e.g., ERMI), the persistence of an entry is indicated in docsIfMCmtsDepiSessionConfigStorage. The DEPI connection mechanism using L2TPv3 is initiated when an entry in this table is set to active. The following conditions apply: o If the M-CMTS L2TPv3 Control Connection with the remote EQAM Host IP in docsIfMCmtsDepiSessionConfigRemoteAddr does not exist, a DEPI L2TPv3 control Connection is created. o There may be cases where the control plane with the EQAM IP host exists or is in progress, (e.g., a previously created entry with same EQAM IP host), thus the M-CMTS MUST avoid multiple L2TP Control Connection State machines. o DEPI L2TPv3 sessions are created based on the TSID value. Only the first entry with row status 'active' with a particular TSID value will try to establish a L2TPv3 session. Other entries with same TSID value return state of 'depiSessionError' in docsIfMCmtsDepiSessionInfoState. Relationships with the DOCSIS MAC domain IfStackTable: This control considers the ability of the M-CMTS to use a manager-specified Downstream interface value for the configuration of the DOCSIS MAC domain downstream interfaces of the M-CMTS architecture. o When docsIfMCmtsDepiSessionConfigCableDownstreamIfIndex is a non-zero value the value of docsIfMCmtsDepiSessionConfigCableMacLayerIfIndex MUST be an existing DOCSIS MAC layer interface. o If an entry in this table already exists for the specified docsIfMCmtsDepiSessionConfigCableDownstreamIfIndex, or corresponds to an ifIndex signaled as 'integrated' in docsIfMCmtsDownstreamType a newly created entry set to active is rejected and reported in docsIfMCmtsDepiSessionInfoState as 'invalidDSInterfaceValue'. o The M-CMTS accepts or rejects the creation of a new table entry based on the possibility of adding a new Downstream interface to the MAC domain. On success it is reported in docsIfMCmtsDownstreamType as 'depiSession'. Relationship with M-CMTS Downstream Interface tables: Setting an entry to active creates or updates (when docsIfMCmtsDepiSessionConfigCableMCmtsDownIfIndex is provided in the row creation; see the object description for details) the corresponding entry in the following tables: ifTable, docsIfDownstreamChannelTable, docsIfMCmtsCoreDownstreamTable/ docsIfMCmtsEqamDownstreamTable, docsIfMCmtsCoreDownstreamTable, docsIfMCmtsDepiSessionInfoTable, and docsIfMCmtsDepiSessionStatsTable In the EQAM device this table is normally created by the M-CMTS Core initiated DEPI session, although manual configuration may be supported, with the difference that EQAM devices are not required to initiate DEPI sessions. EQAM device Operation of configured entries is not detailed in this MIB module." INDEX { docsIfMCmtsDepiSessionConfigIndex } ::= { docsIfMCmtsDepiSessionConfigTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.1 | docsIfMCmtsDepiSessionConfigIndex | 0 | 0 | The index for entries in this conceptual table. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.2 | docsIfMCmtsDepiSessionConfigCableMacIfIndex | 0 | 0 | Defines the MAC domain (ifType docsCableMaclayer)on which the DEPI Session is being set for an existing M-CMTS Downstream interfa… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.3 | docsIfMCmtsDepiSessionConfigCableMCmtsDownIfIndex | 0 | 0 | Defines the Downstream channel index on which the DEPI Session is being set. The set of this object is optional. When this object… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.4 | docsIfMCmtsDepiSessionConfigAddrType | 0 | 0 | The type of InetAddress for docsIfMCmtsDepiSessionConfigLocalAddr and docsIfMCmtsDepiSessionConfigRemoteAddr. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.5 | docsIfMCmtsDepiSessionConfigLocalAddr | 0 | 0 | The InetAddress of the local entity the DEPI Session is set. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.6 | docsIfMCmtsDepiSessionConfigRemoteAddr | 0 | 0 | The InetAddress of the remote peer the DEPI Session is set. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.7 | docsIfMCmtsDepiSessionConfigL2TPv3HeaderType | 0 | 0 | Indicates the type of L2TPv3 header being configured for the DEPI session. The value 'ip' means L2TPv3 Header Over IP The value 'u… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.8 | docsIfMCmtsDepiSessionConfigMethod | 0 | 0 | Indicates the DEPI Tunnel mechanism used for the DEPI session. Currently only 'l2tpControl is supported. The value 'other' is use… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.9 | docsIfMCmtsDepiSessionConfigTSID | 0 | 0 | The TSID to be associated to the DEPI Session. TSID is a 16-bit unsigned integer value configured per QAM channel in the EQAM dev… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.10 | docsIfMCmtsDepiSessionConfigDEPIMode | 0 | 0 | The DEPI mode of operation of this entry 'dmpt' indicates DOCSIS MPT mode (D-MPT) 'psp' indicates Packet Streaming Protocol. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.11 | docsIfMCmtsDepiSessionConfigRsrcAllocReq | 0 | 0 | A reference to docsIfMCmtsDepiRsrcAllocIndex of docsIfMCmtsDepiRsrcAllocTable used in the DEPI Session setup by the M-CMTS Core t… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.12 | docsIfMCmtsDepiSessionConfigCinPhbIdPolicy | 0 | 0 | A list of tags to reference CIN PHB policies in docsIfMCmtsDepiPhbPolicyTable for this DEPI session. This object is not meaningfu… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.13 | docsIfMCmtsDepiSessionConfigSyncEnabled | 0 | 0 | Indicates the DOCSIS Sync message handling at the Edge QAM based upon PSP or DMPT mode of operation. In MPT mode 'true' indicates… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.14 | docsIfMCmtsDepiSessionConfigSyncInterval | 0 | 0 | Indicates the time nominal time interval for EQAM to insert DOCSIS Sync messages when operating in PSP mode. In DMPT mode this va… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.15 | docsIfMCmtsDepiSessionConfigPhyParamsFlag | 0 | 0 | When configuring an entry, DOCSIS PHY parameters may be set directly or default values are used to populate the entry. This object… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.16 | docsIfMCmtsDepiSessionConfigChannelFrequency | 0 | 0 | The channel frequency for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifIndex… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.17 | docsIfMCmtsDepiSessionConfigChannelModulation | 0 | 0 | The channel modulation for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifInde… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.18 | docsIfMCmtsDepiSessionConfigChannelInterleave | 0 | 0 | The channel Interleaver for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifInd… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.19 | docsIfMCmtsDepiSessionConfigChannelPower | 0 | 0 | The channel power level for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifInd… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.20 | docsIfMCmtsDepiSessionConfigChannelAnnex | 0 | 0 | The channel J.83 Annex type for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding if… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.21 | docsIfMCmtsDepiSessionConfigChannelSymbolRateM | 0 | 0 | The value M for the estimation of the DS Symbol Rate as (10.24 MHz )*M/N |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.22 | docsIfMCmtsDepiSessionConfigChannelSymbolRateN | 0 | 0 | The value N for the estimation of the DS Symbol Rate as (10.24 MHz )*M/N |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.23 | docsIfMCmtsDepiSessionConfigChannelOutputRate | 0 | 0 | The percentage of the maximum output rate for the aggregated traffic that is being sent though this M-CMTS Downstream interface t… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.24 | docsIfMCmtsDepiSessionConfigChannelBurstSize | 0 | 0 | The maximum burst size for the aggregate output rate of this M-CMTS Downstream Interface. The default value of this object corres… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.25 | docsIfMCmtsDepiSessionConfigStorage | 0 | 0 | The storage realization of the entry. No columnar values can be changed if the StorageType of an entry is 'permanent'. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.26 | docsIfMCmtsDepiSessionConfigRowStatus | 0 | 0 | The status of this conceptual table row entry. In order to set an entry to the 'active' status, the MIB objects below must be set… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.27 | docsIfMCmtsDepiSessionConfigChannelId | 0 | 0 | The downstream channel identification of this M-CMTS Downstream interface. During entry creation The M-CMTS Core assigns a Channel… |