Setting a bit representing a CM registration state will
enable counting the number of times the CMTS determines
that such CM reaches that state as the last state before
failing to proceed further in the registration process and
within the time interval considered for the CM
registration trigger detection.
docsDiagLogRegDetail OBJECT-TYPE SYNTAX RegistrationDetailFlag MAX-ACCESS read-write STATUS current DESCRIPTION "Setting a bit representing a CM registration state will enable counting the number of times the CMTS determines that such CM reaches that state as the last state before failing to proceed further in the registration process and within the time interval considered for the CM registration trigger detection. "DEFVAL { ''H } ::= { docsDiagLogTriggersCfg 4 }
docsDiagLogRegDetail OBJECT-TYPE SYNTAX RegistrationDetailFlag ACCESS read-write STATUS mandatory DESCRIPTION "Setting a bit representing a CM registration state will enable counting the number of times the CMTS determines that such CM reaches that state as the last state before failing to proceed further in the registration process and within the time interval considered for the CM registration trigger detection." ::= { docsDiagLogTriggersCfg 4 }
Vendor: Cable Television Laboratories, Inc.
Module: DOCS-DIAG-MIB
[Automatically extracted from oidview.com]
docsDiagLogRegDetail OBJECT-TYPE SYNTAX RegistrationDetailFlag MAX-ACCESS read-write STATUS current DESCRIPTION "Setting a bit representing a CM registration state will enable counting the number of times the CMTS determines that such CM reaches that state as the last state before failing to proceed further in the registration process and within the time interval considered for the CM registration trigger detection. "DEFVAL { ''H } ::= { docsDiagLogTriggersCfg 4 }
docsDiagLogRegDetail OBJECT-TYPE SYNTAX RegistrationDetailFlag MAX-ACCESS read-write STATUS current DESCRIPTION "Setting a bit representing a CM registration state will enable counting the number of times the CMTS determines that such CM reaches that state as the last state before failing to proceed further in the registration process and within the time interval considered for the CM registration trigger detection. "DEFVAL { ''H } ::= { docsDiagLogTriggersCfg 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.9.1.2.4.0 | docsDiagLogRegDetail | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.9.1.2.1 | docsDiagLogIncludeTriggers | 1 | 1 | Turns individual diagnostic triggers on and off. Multiple triggers can be turned on or off at a given time. Setting a particular … |
| 1.3.6.1.4.1.4491.2.1.9.1.2.2 | docsDiagLogEnableAgingTriggers | 1 | 1 | Enables and disables the aging of triggers based on the trigger type. Aging out can be enabled or disabled for multiple triggers … |
| 1.3.6.1.4.1.4491.2.1.9.1.2.3 | docsDiagLogRegTimeInterval | 1 | 1 | Configurable parameter for the Registration trigger. The registration time interval is an empirically derived, worst-case number … |
| 1.3.6.1.4.1.4491.2.1.9.1.2.5 | docsDiagLogRangingRetryType | 1 | 1 | Configuration parameter for the Ranging Retry Trigger. When a Cable Modem failed to perform ranging when a ranging opportunity is… |
| 1.3.6.1.4.1.4491.2.1.9.1.2.6 | docsDiagLogRangingRetryThrhld | 1 | 1 | Configurable parameter for the Ranging Retry Trigger. When the number of times a Cable Modem does not acknowledge a MAC-layer sta… |
| 1.3.6.1.4.1.4491.2.1.9.1.2.7 | docsDiagLogRangingRetryStationMaintNum | 1 | 1 | Number of station maintenance opportunities to monitor for ranging retry trigger. This value implies time intervals in a certain … |