The name of the agent image file that the NMM loads
at boot time.
This parameter will not take effect until written to
EEPROM (s3AgentWriteEeprom) and a reset (s3AgentReset)
is issued. This parameter is used only if s3AgentBootMode
is set to use eeprom(1), s3AgentConfigLoadMode is set to
localConfig(3) and s3LocImageLoadMode is not set to
localBoot(3).
Parsed from file s3com.mib.txt
Company: None
Module: SYNOPTICS-COMMON-MIB
The name of the agent image file that the NMM loads
at boot time.
This parameter will not take effect until written to
EEPROM (s3AgentWriteEeprom) and a reset (s3AgentReset)
is issued. This parameter is used only if s3AgentBootMode
is set to use eeprom(1), s3AgentConfigLoadMode is set to
localConfig(3) and s3LocImageLoadMode is not set to
localBoot(3).
Parsed from file SYNOPTICS-COMMON-MIB.mib
Module: SYNOPTICS-COMMON-MIB
Vendor: SynOptics
Module: SYNOPTICS-COMMON-MIB
[Automatically extracted from oidview.com]
s3AgentImageFile OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the agent image file that the NMM loads at boot time. This parameter will not take effect until written to EEPROM (s3AgentWriteEeprom) and a reset (s3AgentReset) is issued. This parameter is used only if s3AgentBootMode is set to use eeprom(1), s3AgentConfigLoadMode is set to localConfig(3) and s3LocImageLoadMode is not set to localBoot(3)." ::= { s3AgentSw 21 }
s3AgentImageFile OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the agent image file that the NMM loads at boot time. This parameter will not take effect until written to EEPROM (s3AgentWriteEeprom) and a reset (s3AgentReset) is issued. This parameter is used only if s3AgentBootMode is set to use eeprom(1), s3AgentConfigLoadMode is set to localConfig(3) and s3LocImageLoadMode is not set to localBoot(3)." ::= { s3AgentSw 21 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.1.2.1.21.0 | s3AgentImageFile | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.1.2.1.1 | s3AgentType | 1 | 1 | The 3000 series agent's Module type. |
| 1.3.6.1.4.1.45.1.2.1.2 | s3AgentFwVer | 1 | 1 | The agent's module firmware version 0=Rev A,1=Rev B,etc. |
| 1.3.6.1.4.1.45.1.2.1.3 | s3AgentSwMajorVer | 1 | 1 | The agent major software version number. (version is specified as major.minor.maint or 3.0.1). Object is in decimal. |
| 1.3.6.1.4.1.45.1.2.1.4 | s3AgentSwMinorVer | 1 | 1 | The agent minor software version number (version is specified as major.minor.maint or 3.0.1). Object is in decimal. |
| 1.3.6.1.4.1.45.1.2.1.5 | s3AgentBootProtocol | 1 | 1 | Boot protocol used to load the module with its software. On Agents with the Local Load option the value return by this object is … |
| 1.3.6.1.4.1.45.1.2.1.6 | s3AgentBootFile | 1 | 1 | The name of the boot file that is sent to the file server during boot time. The actual boot protocol used to retrieve the file i… |
| 1.3.6.1.4.1.45.1.2.1.7 | s3AgentAuthTrap | 1 | 1 | s3AgentAuthtrap |
| 1.3.6.1.4.1.45.1.2.1.8 | s3AgentLocation | 1 | 1 | This is a informational string that could be used to show the physical location (i.e. area) of the NMM or concentrator. This param… |
| 1.3.6.1.4.1.45.1.2.1.9 | s3AgentMibLevel | 1 | 1 | Used to determine current MIB release supported by agent. The encoding of this object is of the following form: xyy, where x is … |
| 1.3.6.1.4.1.45.1.2.1.10 | s3AgentFeatureLevel | 1 | 1 | Used to determine feature level of the agent. The encoding of this object is of the following form: xyy, where x is the major ver… |
| 1.3.6.1.4.1.45.1.2.1.11 | s3AgentMySlotId | 1 | 1 | Slot where this agent currently resides. If hardware is unable to determine then a 0 should be returned. |
| 1.3.6.1.4.1.45.1.2.1.12 | s3AgentUnAuthIp | 1 | 1 | This object contains the IP address of the last station that tried to access this agent with an invalid community string. This o… |
| 1.3.6.1.4.1.45.1.2.1.13 | s3AgentUnAuthComm | 1 | 1 | This object contains the community string of the last unauthenticated attempt to access this agent. This object is used as a VarB… |
| 1.3.6.1.4.1.45.1.2.1.14 | s3AgentSwLicenseCode | 1 | 1 | The software license code assigned to this agent. This code is required for initializing the agent. The code consists of exactly … |
| 1.3.6.1.4.1.45.1.2.1.15 | s3AgentPerformance | 1 | 1 | This counts the CPU idle time of the agent in units of 10 microseconds. |
| 1.3.6.1.4.1.45.1.2.1.16 | s3AgentSwMaintVer | 1 | 1 | The agent software maintenance version number (version is specified as major.minor.maint or 3.0.1). Object is in decimal. |
| 1.3.6.1.4.1.45.1.2.1.17 | s3AgentConfigLoadMode | 1 | 1 | This indicates whether the agent should get configuration data from the network, use the local configuration data, or try the net… |
| 1.3.6.1.4.1.45.1.2.1.18 | s3AgentConfigActualSource | 1 | 1 | This indicates whether the agent loaded configuration data from the network or used the local configuration data. |
| 1.3.6.1.4.1.45.1.2.1.19 | s3AgentMgmtProtoMode | 1 | 1 | This indicates from which network transports over which the agent will accept SNMP requests. This object only applies to agents … |
| 1.3.6.1.4.1.45.1.2.1.20 | s3AgentActualMgmtProtocol | 1 | 1 | This indicates which network transports over which the agent will currently accept SNMP requests. |