Does this concentrator have retiming turned on.
Writing a 1 will turn off retiming and writing a
2 will turn on retiming. This will change the
active state of retiming but will change the value
in EEPROM only when agentWriteEeprom is set.The
factory default of this state is on.
Retiming cannot be disabled in the 2810 concentrator.
The 2810 agent will implement this object as read-only.
Parsed from file s3eth461.mib.txt
Company: None
Module: SYNOPTICS-ETHERNET-MIB
Does this concentrator have retiming turned on.
Writing a 1 will turn off retiming and writing a
2 will turn on retiming. This will change the
active state of retiming but will change the value
in EEPROM only when agentWriteEeprom is set.The
factory default of this state is on.
Retiming cannot be disabled in the 2810 concentrator.
The 2810 agent will implement this object as read-only.
Parsed from file SYNOPTICS-BASIC-ETHTOK-MIB.mib
Module: SYNOPTICS-BASIC-ETHTOK-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
s3EnetConcRetimingStatus OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Does this concentrator have retiming turned on. Writing a 1 will turn off retiming and writing a 2 will turn on retiming. This will change the active state of retiming but will change the value in EEPROM only when agentWriteEeprom is set.The factory default of this state is on. Retiming cannot be disabled in the 2810 concentrator. The 2810 agent will implement this object as read-only." ::= { s3000EnetConcentrator 1 }
s3EnetConcRetimingStatus OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Does this concentrator have retiming turned on. Writing a 1 will turn off retiming and writing a 2 will turn on retiming. This will change the active state of retiming but will change the value in EEPROM only when agentWriteEeprom is set.The factory default of this state is on. Retiming cannot be disabled in the 2810 concentrator. The 2810 agent will implement this object as read-only." ::= { s3000EnetConcentrator 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.3.2.1.1.0 | s3EnetConcRetimingStatus | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.3.2.1.2 | s3EnetConcFrmsRxOk | 1 | 1 | This contains a count of frames that are successfully received by the concentrator. This does not include frames received with a… |
1.3.6.1.4.1.45.1.3.2.1.3 | s3EnetConcOctetsRxOk | 1 | 1 | Contains a count of data and padding octets in frames that are successfully received by the concentrator. This does not include f… |
1.3.6.1.4.1.45.1.3.2.1.4 | s3EnetConcMcastFrmsRxOk | 1 | 1 | This contains a count of frames that are successfully received by the concentrator and are directed to an active non-broadcast gr… |
1.3.6.1.4.1.45.1.3.2.1.5 | s3EnetConcBcastFrmsRxOk | 1 | 1 | This contains a count of frames that are successfully received by the concentrator and are directed to the broadcast group addres… |
1.3.6.1.4.1.45.1.3.2.1.6 | s3EnetConcColls | 1 | 1 | This contains a count of the collisions at the concentrator level. For NMM+ this is a true counter. For other NMMs this is a sum… |
1.3.6.1.4.1.45.1.3.2.1.7 | s3EnetConcTooLongErrors | 1 | 1 | This contains a count of frames that are received by the concentrator and exceed the maximum permitted frame size. This counter … |
1.3.6.1.4.1.45.1.3.2.1.8 | s3EnetConcRuntErrors | 1 | 1 | This contains a count of frames received by the concentrator that are less than the minimum permitted frame size and have a good … |
1.3.6.1.4.1.45.1.3.2.1.9 | s3EnetConcFragErrors | 1 | 1 | This contains a count of frames received by the concentrator that are less than the minimum permitted frame size and have a bad F… |
1.3.6.1.4.1.45.1.3.2.1.10 | s3EnetConcAlignErrors | 1 | 1 | This contains a count of frames received by the concentrator that are not an integral number of octets in length and do not pass … |
1.3.6.1.4.1.45.1.3.2.1.11 | s3EnetConcFcsErrors | 1 | 1 | This contains a count of frames received by the concentrator that are an integral number of octets in length that do not pass the… |
1.3.6.1.4.1.45.1.3.2.1.12 | s3EnetConcLateCollErrors | 1 | 1 | This contains a total concentrator count of the late collisions. For NMM+ this is a true counter. For other NMMs this is a summat… |
1.3.6.1.4.1.45.1.3.2.1.13 | s3EnetConcSecureStatus | 1 | 1 | This s3EnetConcSecureStatus object indicates whether the security features (both allowed nodes and LattisSecure) for the concentr… |
1.3.6.1.4.1.45.1.3.2.1.14 | s3EnetConcAuthAction | 1 | 1 | If s3EnetConcSecureStatus is concSecureOn(2) and a violation occurs, then the action specified by this object will take place. O… |
1.3.6.1.4.1.45.1.3.2.1.15 | s3EnetConcSecurityLock | 1 | 1 | If s3EnetConcSecurityLock is locked(2), the agent will refuse all requests to modify the 'security configuration' (defined below)… |
1.3.6.1.4.1.45.1.3.2.1.16 | s3EnetConcEnetChan | 1 | 1 | Identifies the channel to which this NMM is currently monitoring. |