This indicates the operational status of the Port.
Writing a partition(2) will partition the port
indefinitely and enabled(1) will enable the port.
If a timed partition is desired, then writing
timedPartition(4) to this object at the same time
that a time value is supplied in s3EnetCommonPortPartTime
is required. Timed partitions will not survive across
a reset. In this case the port will go to the
partition(2) state.
The value latSecPartition(5) is returned when the port
has been automatically partitioned by the LattisSecure
Host Module because of a security violation. The value
autoPartition(3) is returned when the port has been
automatically partitioned by the repeater using the
802.3 repeater auto-partition function.
The agent will not allow this object to be set to
autoPartition(3) or latSecPartition(5) using an SNMP
request.
Note that the value timedPartition(4) is returned only
when the board is timed partitioned by this NMM.
Parsed from file s3eth461.mib.txt
Company: None
Module: SYNOPTICS-ETHERNET-MIB
This indicates the operational status of the Port.
Writing a partition(2) will partition the port
indefinitely and enabled(1) will enable the port.
If a timed partition is desired, then writing
timedPartition(4) to this object at the same time
that a time value is supplied in s3EnetCommonPortPartTime
is required. Timed partitions will not survive across
a reset. In this case the port will go to the
partition(2) state.
The value latSecPartition(5) is returned when the port
has been automatically partitioned by the LattisSecure
Host Module because of a security violation. The value
autoPartition(3) is returned when the port has been
automatically partitioned by the repeater using the
802.3 repeater auto-partition function.
The agent will not allow this object to be set to
autoPartition(3) or latSecPartition(5) using an SNMP
request.
Note that the value timedPartition(4) is returned only
when the board is timed partitioned by this NMM.
Parsed from file SYNOPTICS-BASIC-ETHTOK-MIB.mib
Module: SYNOPTICS-BASIC-ETHTOK-MIB
Vendor: Nortel Networks
Module: SYNOPTICS-ETHERNET-MIB (s3eth460.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
s3EnetCommonPortPartStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), partition(2), autoPartition(3), timedPartition(4), latSecPartition(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This indicates the operational status of the Port. Writing a partition(2) will partition the port indefinitely and enabled(1) will enable the port. If a timed partition is desired, then writing timedPartition(4) to this object at the same time that a time value is supplied in s3EnetCommonPortPartTime is required. Timed partitions will not survive across a reset. In this case the port will go to the partition(2) state. The value latSecPartition(5) is returned when the port has been automatically partitioned by the LattisSecure Host Module because of a security violation. The value autoPartition(3) is returned when the port has been automatically partitioned by the repeater using the 802.3 repeater auto-partition function. The agent will not allow this object to be set to autoPartition(3) or latSecPartition(5) using an SNMP request. Note that the value timedPartition(4) is returned only when the board is timed partitioned by this NMM." ::= { s3EnetCommonPortEntry 4 }
s3EnetCommonPortPartStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), partition(2), autoPartition(3), timedPartition(4), latSecPartition(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This indicates the operational status of the Port. Writing a partition(2) will partition the port indefinitely and enabled(1) will enable the port. If a timed partition is desired, then writing timedPartition(4) to this object at the same time that a time value is supplied in s3EnetCommonPortPartTime is required. Timed partitions will not survive across a reset. In this case the port will go to the partition(2) state. The value latSecPartition(5) is returned when the port has been automatically partitioned by the LattisSecure Host Module because of a security violation. The value autoPartition(3) is returned when the port has been automatically partitioned by the repeater using the 802.3 repeater auto-partition function. The agent will not allow this object to be set to autoPartition(3) or latSecPartition(5) using an SNMP request. Note that the value timedPartition(4) is returned only when the board is timed partitioned by this NMM." ::= { s3EnetCommonPortEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.1.3.2.3.2.1.1 | s3EnetCommonPortBoardIndex | 0 | 0 | A unique value for each board. Its value ranges between 1 and 12. The value for each board must remain constant at least from o… |
| 1.3.6.1.4.1.45.1.3.2.3.2.1.2 | s3EnetCommonPortIndex | 0 | 0 | A unique value for each port. Its value is dependent on the board type. |
| 1.3.6.1.4.1.45.1.3.2.3.2.1.3 | s3EnetCommonPortLinkStatus | 0 | 0 | Tells whether the port is receiving link status. |
| 1.3.6.1.4.1.45.1.3.2.3.2.1.5 | s3EnetCommonPortType | 0 | 0 | The media connnection type for this port. Note that this object was called s3EnetPortMDIXSwitch in the Ethernet 3.3 and 4.0 MIBs. |
| 1.3.6.1.4.1.45.1.3.2.3.2.1.6 | s3EnetCommonPortPartTime | 0 | 0 | When partitioning the port for a specified time, s3EnetCommonPortPartStatus must be set with timedPartition(4) and this object mu… |