The mode of switch security. singleMACperPort(1) indicates
that the switch is in single-MAC-per-port mode which means it
allows to configure only one MAC address per port. macList(2)
indicates that the switch is in MAC-List mode, user can
configure more than one MAC address per port, the maximum numbers
of MAC address per port vary from switch to switch. autoLearn(3)
indicates that the switch will learn the first MAC address on each
port as an allowed address of that port. Change made between
singleMACperPort(1), macList(2) and autoLearn(3)
will erase all the data in s5SbsAuthCfgTable.
Parsed from file s5sbs102.mib.txt
Company: None
Module: S5-SWITCH-BAYSECURE-MIB
The mode of switch security. singleMACperPort(1) indicates
that the switch is in single-MAC-per-port mode which means it
allows to configure only one MAC address per port. macList(2)
indicates that the switch is in MAC-List mode, user can
configure more than one MAC address per port, the maximum numbers
of MAC address per port vary from switch to switch. autoLearn(3)
indicates that the switch will learn the first MAC address on each
port as an allowed address of that port. Change made between
singleMACperPort(1), macList(2) and autoLearn(3)
will erase all the data in s5SbsAuthCfgTable.
Parsed from file S5-SWITCH-BAYSECURE-MIB.mib
Module: S5-SWITCH-BAYSECURE-MIB
Vendor: SynOptics
Module: S5-SWITCH-BAYSECURE-MIB
[Automatically extracted from oidview.com]
s5SbsSecurityMode OBJECT-TYPE SYNTAX INTEGER { singleMACperPort(1), macList(2), autoLearn(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The mode of switch security. singleMACperPort(1) indicates that the switch is in single-MAC-per-port mode which means it allows to configure only one MAC address per port. macList(2) indicates that the switch is in MAC-List mode, user can configure more than one MAC address per port, the maximum numbers of MAC address per port vary from switch to switch. autoLearn(3) indicates that the switch will learn the first MAC address on each port as an allowed address of that port. Change made between singleMACperPort(1), macList(2) and autoLearn(3) will erase all the data in s5SbsAuthCfgTable." ::= { s5SbsAuth 4 }
s5SbsSecurityMode OBJECT-TYPE SYNTAX INTEGER { singleMACperPort(1), macList(2), autoLearn(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The mode of switch security. singleMACperPort(1) indicates that the switch is in single-MAC-per-port mode which means it allows to configure only one MAC address per port. macList(2) indicates that the switch is in MAC-List mode, user can configure more than one MAC address per port, the maximum numbers of MAC address per port vary from switch to switch. autoLearn(3) indicates that the switch will learn the first MAC address on each port as an allowed address of that port. Change made between singleMACperPort(1), macList(2) and autoLearn(3) will erase all the data in s5SbsAuthCfgTable." ::= { s5SbsAuth 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.6.5.3.4.0 | s5SbsSecurityMode | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.6.5.3.1 | s5SbsAuthSecurityLock | 1 | 1 | If s5SbsAuthSecurityLock is locked(2), the agent will refuse all requests to modify the 'security configuration'. Objects in s5Sb… |
1.3.6.1.4.1.45.1.6.5.3.2 | s5SbsAuthCtlPartTime | 1 | 1 | If the value of s5SbsAuthCfgActionMode is partitionPort or partitionPortAndSendTrap, time partition will be done if this value is… |
1.3.6.1.4.1.45.1.6.5.3.3 | s5SbsSecurityStatus | 1 | 1 | Indicates whether the switch security feature is enabled or not. |
1.3.6.1.4.1.45.1.6.5.3.5 | s5SbsSecurityAction | 1 | 1 | Action performed by software when a violation occurs (if s5SbsSecurityStatus is enabled). The security action specified here app… |
1.3.6.1.4.1.45.1.6.5.3.6 | s5SbsCurrNodesAllowed | 1 | 1 | The current number of entries of the nodes allowed in the s5SbsAuthCfgTable. |
1.3.6.1.4.1.45.1.6.5.3.7 | s5SbsMaxNodesAllowed | 1 | 1 | The maximum number of entries of the nodes allowed in the s5SbsAuthCfgTable. |
1.3.6.1.4.1.45.1.6.5.3.8 | s5SbsCurrNodesBlocked | 1 | 1 | The current number of entries of the nodes blocked in the s5SbsAuthCfgTable. |
1.3.6.1.4.1.45.1.6.5.3.9 | s5SbsMaxNodesBlocked | 1 | 1 | The maximum number of entries of the nodes blocked in the s5SbsAuthCfgTable. |
1.3.6.1.4.1.45.1.6.5.3.10 | s5SbsAuthCfgTable | 1 | 9 | A table containing a list of boards and ports and MAC addresses that constitute the security configuration. |
1.3.6.1.4.1.45.1.6.5.3.11 | s5SbsAuthStatusTable | 1 | 7 | A table containing a snapshot of the authorized boards and ports status data collection. Port security information consists of an… |
1.3.6.1.4.1.45.1.6.5.3.12 | s5SbsViolationStatusTable | 1 | 4 | A table containing a list of boards, ports where network access violations have occurred. Information also contains the offendin… |
1.3.6.1.4.1.45.1.6.5.3.13 | s5SbsMgmViolationType | 1 | 1 | Type of management access attempted when the violation occurred. |
1.3.6.1.4.1.45.1.6.5.3.14 | s5SbsMgmViolationIpAddress | 1 | 1 | IP Address of the station attempting unauthorized management access. |
1.3.6.1.4.1.45.1.6.5.3.15 | s5SbsPortSecurityStatus | 1 | 1 | The set of ports for which security is enabled. The bitwise AND of s5SbsPortSecurityStatus and s5SbsPortLearnStatus must be the e… |
1.3.6.1.4.1.45.1.6.5.3.16 | s5SbsPortLearnStatus | 1 | 1 | The set of ports for which auto learning is enabled. |
1.3.6.1.4.1.45.1.6.5.3.17 | s5SbsCurrSecurityLists | 1 | 1 | The current number of entries of the Security lists in the s5SbsSecurityListTable. |
1.3.6.1.4.1.45.1.6.5.3.18 | s5SbsMaxSecurityLists | 1 | 1 | The maximum number of entries of the Security lists in the s5SbsSecurityListTable. |
1.3.6.1.4.1.45.1.6.5.3.19 | s5SbsSecurityListTable | 1 | 4 | A table containing a list of Security port lists. |
1.3.6.1.4.1.45.1.6.5.3.20 | s5SbsMacViolation | 2 | 7 | None |
1.3.6.1.4.1.45.1.6.5.3.21 | s5SbsAutoLearningAgingTime | 1 | 1 | The lifetime for MAC addresses that are auto-learned. This is measure in hours. A value of 0 means addresses are not aged out. |
1.3.6.1.4.1.45.1.6.5.3.22 | s5SbsAutoLearningConfigTable | 1 | 5 | A table containing per-port configuration for auto-learning. Entries exist in the table for each ethernet port in the system. |
1.3.6.1.4.1.45.1.6.5.3.23 | s5SbsAutoLearningPorts | 1 | 1 | This object specifies the set of ports for which auto- learning is enabled. It is an alternative to s5SbsAutoLearningConfigEnabl… |
1.3.6.1.4.1.45.1.6.5.3.24 | s5SbsAutoLearningSticky | 1 | 1 | This object controls whether the 'sticky-mac' feature is enabled. |
1.3.6.1.4.1.45.1.6.5.3.25 | s5SbsSecurityLockoutPortList | 1 | 1 | This object controls the set of ports that are locked such that they cannot have mac-security enabled. |