The current status of this ring.
The states are:
normalOperation(1).........ring operating without
any interruption.
ringPurge(2)...............Active monitor enters
the ring purge state whenever a token error
is detected.
monitorContention(3).......ring enters in monitor
contention state whenever the ring stations
need to establish an active monitor.
beaconFrameStreaming(4)....station which participates
in monitor contention and has monitor
contention timeout expired, receives multiple
claim tokens and cannot solve the contention
within one second.
beaconBitStreaming(5)......station which participates
in monitor contention, has 'monitor timeout'
and does not receive any claim token.
beaconRingSignalLoss(6)....station which has
'contention timeout' and participates in monitor
contention and detects the loss of incoming
signal.
beaconSetRecoveryMode(7)...station before acting as a
recovery station sends out beacon frame with a
recovery mode bit set.
Parsed from file S5TOK121.MIB.txt
Company: None
Module: S5-TOKENRING-MIB
The current status of this ring.
The states are:
normalOperation(1).........ring operating without
any interruption.
ringPurge(2)...............Active monitor enters
the ring purge state whenever a token error
is detected.
monitorContention(3).......ring enters in monitor
contention state whenever the ring stations
need to establish an active monitor.
beaconFrameStreaming(4)....station which participates
in monitor contention and has monitor
contention timeout expired, receives multiple
claim tokens and cannot solve the contention
within one second.
beaconBitStreaming(5)......station which participates
in monitor contention, has 'monitor timeout'
and does not receive any claim token.
beaconRingSignalLoss(6)....station which has
'contention timeout' and participates in monitor
contention and detects the loss of incoming
signal.
beaconSetRecoveryMode(7)...station before acting as a
recovery station sends out beacon frame with a
recovery mode bit set.
Parsed from file S5-TOKENRING-MIB.mib
Module: S5-TOKENRING-MIB
Vendor: SynOptics
Module: S5-TOKENRING-MIB
[Automatically extracted from oidview.com]
s5TrRingInfoRingState OBJECT-TYPE SYNTAX INTEGER { normalOperation(1), ringPurge(2), monitorContention(3), beaconFrameStreaming(4), beaconBitStreaming(5), beaconRingSignalLoss(6), beaconSetRecoveryMode(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The current status of this ring. The states are: normalOperation(1).........ring operating without any interruption. ringPurge(2)...............Active monitor enters the ring purge state whenever a token error is detected. monitorContention(3).......ring enters in monitor contention state whenever the ring stations need to establish an active monitor. beaconFrameStreaming(4)....station which participates in monitor contention and has monitor contention timeout expired, receives multiple claim tokens and cannot solve the contention within one second. beaconBitStreaming(5)......station which participates in monitor contention, has 'monitor timeout' and does not receive any claim token. beaconRingSignalLoss(6)....station which has 'contention timeout' and participates in monitor contention and detects the loss of incoming signal. beaconSetRecoveryMode(7)...station before acting as a recovery station sends out beacon frame with a recovery mode bit set." ::= { s5TrRingInfoEntry 9 }
s5TrRingInfoRingState OBJECT-TYPE SYNTAX INTEGER { normalOperation(1), ringPurge(2), monitorContention(3), beaconFrameStreaming(4), beaconBitStreaming(5), beaconRingSignalLoss(6), beaconSetRecoveryMode(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The current status of this ring. The states are: normalOperation(1).........ring operating without any interruption. ringPurge(2)...............Active monitor enters the ring purge state whenever a token error is detected. monitorContention(3).......ring enters in monitor contention state whenever the ring stations need to establish an active monitor. beaconFrameStreaming(4)....station which participates in monitor contention and has monitor contention timeout expired, receives multiple claim tokens and cannot solve the contention within one second. beaconBitStreaming(5)......station which participates in monitor contention, has 'monitor timeout' and does not receive any claim token. beaconRingSignalLoss(6)....station which has 'contention timeout' and participates in monitor contention and detects the loss of incoming signal. beaconSetRecoveryMode(7)...station before acting as a recovery station sends out beacon frame with a recovery mode bit set." ::= { s5TrRingInfoEntry 9 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.6.7.3.1.1.1 | s5TrRingInfoSrcIndx | 0 | 0 | The index of the entry in the table. This index identifies the source of the information. Only those sources that provide these st… |
1.3.6.1.4.1.45.1.6.7.3.1.1.2 | s5TrRingInfoRingNum | 0 | 0 | The ring number of the ring that is being monitored. Each ring in a multiple ring network is assigned a unique number. Together, … |
1.3.6.1.4.1.45.1.6.7.3.1.1.3 | s5TrRingInfoStaTableOperSize | 0 | 0 | The operational size of the station info table (i.e., table s5TrStaInfoTable). This size is the maximum number of stations for whi… |
1.3.6.1.4.1.45.1.6.7.3.1.1.4 | s5TrRingInfoActiveStations | 0 | 0 | The number of active stations on the ring that is being monitored. This is the number of active stations in the station info table… |
1.3.6.1.4.1.45.1.6.7.3.1.1.5 | s5TrRingInfoDeletes | 0 | 0 | The number of times stations were removed from table s5TrStaInfoTable due to either aging out or table overflow. |
1.3.6.1.4.1.45.1.6.7.3.1.1.6 | s5TrRingInfoLastDeleteTime | 0 | 0 | The value of sysUpTime when the last station was removed from table s5TrStaInfoTable. If this has not occurred, then the value is … |
1.3.6.1.4.1.45.1.6.7.3.1.1.7 | s5TrRingInfoAgeInterval | 0 | 0 | The amount of time used to age stations from table s5TrStaInfoTable. If a station has had a status of inactive in the last time in… |
1.3.6.1.4.1.45.1.6.7.3.1.1.8 | s5TrRingInfoMonTime | 0 | 0 | The length of time that the ring has been monitored by the current source. |
1.3.6.1.4.1.45.1.6.7.3.1.1.10 | s5TrRingInfoBeaconSender | 0 | 0 | The MAC address of the sender of the last beacon frame detected on the ring. If no beacon frame has been detected, then the value … |
1.3.6.1.4.1.45.1.6.7.3.1.1.11 | s5TrRingInfoBeaconNaun | 0 | 0 | The MAC address of the NAUN (next active upstream neighbor) in the last beacon frame detected on the ring. If no beacon frame has… |
1.3.6.1.4.1.45.1.6.7.3.1.1.12 | s5TrRingInfoBeaconType | 0 | 0 | The type of the last beacon frame detected on the ring. The values are: other(1).................No beacon seen or some other type… |
1.3.6.1.4.1.45.1.6.7.3.1.1.13 | s5TrRingInfoLastBeaconTime | 0 | 0 | The value of sysUpTime when the last beacon frame was detected on the ring. If one has not been detected, then the value is zero. |
1.3.6.1.4.1.45.1.6.7.3.1.1.14 | s5TrRingInfoActiveMonitor | 0 | 0 | The MAC address of the Active Monitor on the ring. If this address is unknown, then the value is equal to six octets of zero. |
1.3.6.1.4.1.45.1.6.7.3.1.1.15 | s5TrRingInfoChanges | 0 | 0 | The number of add and delete events in the station info table associated with this ring. If no changes have occurred, then the val… |
1.3.6.1.4.1.45.1.6.7.3.1.1.16 | s5TrRingInfoRingPurgeEvents | 0 | 0 | The total number of times that the ring has entered the ring purge state from the normal ring state. The ring purge state that co… |
1.3.6.1.4.1.45.1.6.7.3.1.1.17 | s5TrRingInfoBeaconEvents | 0 | 0 | The total number of times that the ring has entered the beaconing state. |
1.3.6.1.4.1.45.1.6.7.3.1.1.18 | s5TrRingInfoBeaconTime | 0 | 0 | The total amount of time that the ring has been in the beaconing state. This beacon time is updated anytime whenever the ring ent… |
1.3.6.1.4.1.45.1.6.7.3.1.1.19 | s5TrRingInfoMonitorContentionEvents | 0 | 0 | The total number of times that the ring has entered the monitor contention state from the normal ring state or ring purge state. … |
1.3.6.1.4.1.45.1.6.7.3.1.1.20 | s5TrRingInfoNaunChanges | 0 | 0 | The total number of NAUN (Nearest Active Upstream Neighbor) changes that have been measured. This is determined by the number of R… |
1.3.6.1.4.1.45.1.6.7.3.1.1.21 | s5TrRingInfoRingPollEvents | 0 | 0 | The total number of ring poll events that have been detected. |