Determines whether interface role associations
are subject to loose or strict capabilities
verification. Setting the value of this attribute
to 'roleAssocCompatLoose(1)' means that interfaces
with different capabilities may be associated with
the same role. In this case, configuration issues
may arise due to these differences. Setting the
value to 'roleAssocCompatStrict(2)' means that
only interfaces with compatible capabilities may
be associated with the same role. This mode can
be used to avoid configuration issues resulting
from the interfaces assigned to a role not having
the same underlying capabilities.
Parsed from file pibNtnEvol_004.mib.txt
Company: baynetworks
Module: NTN-QOS-POLICY-EVOL-PIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
ntnQosConfigRoleAssocCompatLevel OBJECT-TYPE SYNTAX INTEGER { roleAssocCompatLoose(1), roleAssocCompatStrict(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines whether interface role associations are subject to loose or strict capabilities verification. Setting the value of this attribute to 'roleAssocCompatLoose(1)' means that interfaces with different capabilities may be associated with the same role. In this case, configuration issues may arise due to these differences. Setting the value to 'roleAssocCompatStrict(2)' means that only interfaces with compatible capabilities may be associated with the same role. This mode can be used to avoid configuration issues resulting from the interfaces assigned to a role not having the same underlying capabilities." ::= { ntnQosPolicyAgtClasses 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.4.7.1.11.9.0 | ntnQosConfigRoleAssocCompatLevel | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.4.7.1.11.1 | ntnQosPrcSupportTable | 1 | 6 | Each instance of this class specifies a PRC that the device supports and a bit string to indicate the attributes of the class tha… |
| 1.3.6.1.4.1.45.4.7.1.11.2 | ntnQosPolicyDeviceIdentTable | 1 | 4 | This class contains a single policy rule instance that contains device-specific information. |
| 1.3.6.1.4.1.45.4.7.1.11.3 | ntnQosConfigResetToDefaults | 1 | 1 | All installed QoS policy state information can be deleted and reset to the device's default state by setting the value of this ob… |
| 1.3.6.1.4.1.45.4.7.1.11.4 | ntnQosConfigTrackStatistics | 1 | 1 | The value of this attribute determines if statistics tracking is enabled for system-level policies. System-level policies are cre… |
| 1.3.6.1.4.1.45.4.7.1.11.5 | ntnQosConfigNVCommitDelay | 1 | 1 | Specifies the maximum amount of time, in seconds, before non-volatile QoS configuration data will be written to non-volatile stor… |
| 1.3.6.1.4.1.45.4.7.1.11.6 | ntnQosConfigDefaultQueueCfg | 1 | 1 | The value of this attribute determines the queue set that is associated with all egress interfaces by default. A queue set is char… |
| 1.3.6.1.4.1.45.4.7.1.11.7 | ntnQosConfigDefaultBufferingCaps | 1 | 1 | The value of this attribute determines the method through which buffering resources are allocated to ports sharing a pool of buff… |
| 1.3.6.1.4.1.45.4.7.1.11.8 | ntnQosConfigUBPSupportLevel | 1 | 1 | Determines whether QoS Agent User Based Policy (UBP) support is enabled and, if so, what level of support is enabled. Setting the… |
| 1.3.6.1.4.1.45.4.7.1.11.10 | ntnQosConfigDappEnable | 1 | 1 | Dictates whether the DoS Attack Prevention Package (DAPP) is enabled on all applicable ports and, when enabled, if resources will… |
| 1.3.6.1.4.1.45.4.7.1.11.11 | ntnQosConfigDappMinTcpHdrSize | 1 | 1 | DAPP minimum TCP header length allowed. Used when performing TCP fragment validation. IPv4 TCP first fragment packets will be dro… |
| 1.3.6.1.4.1.45.4.7.1.11.12 | ntnQosConfigDappIpv4IcmpMaxLength | 1 | 1 | DAPP maximum IPv4 ICMP length. Used when performing ICMP validation. IPv4 ICMP packets will be dropped if the length (IP payload)… |
| 1.3.6.1.4.1.45.4.7.1.11.13 | ntnQosConfigDappIpv6IcmpMaxLength | 1 | 1 | DAPP maximum IPv6 ICMP length. Used when performing ICMP validation. IPv6 ICMP packets will be dropped if the length exceeds this… |
| 1.3.6.1.4.1.45.4.7.1.11.14 | ntnQosConfigNtApplicationMode | 1 | 1 | Controls NT Application Mode processing. When enabled, identified NT application traffic will be given preferential treatment ove… |
| 1.3.6.1.4.1.45.4.7.1.11.15 | ntnQosConfigQosOperMode | 1 | 1 | Controls overall QoS processing for the system. When enabled, all QoS functionality can be exercised by the user. When disabled, … |
| 1.3.6.1.4.1.45.4.7.1.11.16 | ntnQosConfigTrustedProcessingMode | 1 | 1 | Controls filter usage related to Trusted interface class processing on platforms using filters to support treating traffic as tru… |
| 1.3.6.1.4.1.45.4.7.1.11.17 | ntnQosConfigResetToPartialDefaults | 1 | 1 | Most installed QoS policy state information can be deleted and reset to the device's default state by setting the value of this o… |