The maximum number of bytes in a single
transmission burst. This attribute is
used for:
EBS in RFC 2697 for srTCM
PBS in RFC 2698 for trTCM.
Version 2 attribute.
Parsed from file pibNtnEvol_004.mib.txt
Company: baynetworks
Module: NTN-QOS-POLICY-EVOL-PIB
Vendor: Avaya
Module: NTN-QOS-POLICY-EVOL-PIB (NTN-QOS-POLICY-EVOL-PIB.mib)
Type: TABULAR
Access: read-create
Syntax: BurstSize
Automatically extracted from www.mibdepot.com
ntnQosDsL2AccessElemSecondaryBurstSize OBJECT-TYPE SYNTAX BurstSize UNITS "Bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of bytes in a single transmission burst. This attribute is used for: EBS in RFC 2697 for srTCM PBS in RFC 2698 for trTCM. Version 2 attribute." DEFVAL { 0 } ::= { ntnQosDsL2AccessElemEntry 59 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.4.7.1.13.11.1.1 | ntnQosDsL2AccessElemId | 0 | 0 | An index that enumerates the access element entries. Managers can obtain new values for row creation in this table by reading ntn… |
1.3.6.1.4.1.45.4.7.1.13.11.1.2 | ntnQosDsL2AccessElemAddrType | 0 | 0 | The type of IP address used by this access element entry. While other types of addresses are defined in the InetAddressType text… |
1.3.6.1.4.1.45.4.7.1.13.11.1.3 | ntnQosDsL2AccessElemDstIpAddr | 0 | 0 | The IP address to match against the packet's destination IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefi… |
1.3.6.1.4.1.45.4.7.1.13.11.1.4 | ntnQosDsL2AccessElemDstIpPrefixLength | 0 | 0 | The length of the CIDR Prefix carried in ntnQosDsL2AccessElemDstIpAddr. In IPv4 addresses, a length of 0 indicates a match of any… |
1.3.6.1.4.1.45.4.7.1.13.11.1.5 | ntnQosDsL2AccessElemSrcIpAddr | 0 | 0 | The IP address to match against the packet's source IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. ntn… |
1.3.6.1.4.1.45.4.7.1.13.11.1.6 | ntnQosDsL2AccessElemSrcIpPrefixLength | 0 | 0 | The length of the CIDR Prefix carried in ntnQosDsL2AccessElemSrcIpAddr. In IPv4 addresses, a length of 0 indicates a match of any… |
1.3.6.1.4.1.45.4.7.1.13.11.1.7 | ntnQosDsL2AccessElemDscp | 0 | 0 | The value that the DSCP in the packet must have to match this entry. A value of -1 indicates that a specific DSCP value has not be… |
1.3.6.1.4.1.45.4.7.1.13.11.1.8 | ntnQosDsL2AccessElemFlowId | 0 | 0 | The flow identifier in an IPv6 header. Version 1/2 attribute. |
1.3.6.1.4.1.45.4.7.1.13.11.1.9 | ntnQosDsL2AccessElemProtocol | 0 | 0 | The IP protocol to match against the IPv4 protocol number or the IPv6 Next-Header number in the packet. A value of 255 means matc… |
1.3.6.1.4.1.45.4.7.1.13.11.1.10 | ntnQosDsL2AccessElemDstL4PortMin | 0 | 0 | The minimum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. Versio… |
1.3.6.1.4.1.45.4.7.1.13.11.1.11 | ntnQosDsL2AccessElemDstL4PortMax | 0 | 0 | The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This … |
1.3.6.1.4.1.45.4.7.1.13.11.1.12 | ntnQosDsL2AccessElemSrcL4PortMin | 0 | 0 | The minimum value that the layer-4 source port number in the packet must have in order to match this classifier entry. Version 1/2… |
1.3.6.1.4.1.45.4.7.1.13.11.1.13 | ntnQosDsL2AccessElemSrcL4PortMax | 0 | 0 | The maximum value that the layer-4 source port number in the packet must have in order to match this classifier entry. This value… |
1.3.6.1.4.1.45.4.7.1.13.11.1.14 | ntnQosDsL2AccessElemDstMacAddr | 0 | 0 | The 802 address against which the 802 DA of incoming traffic streams will be compared. Frames whose 802 DA matches the physical ad… |
1.3.6.1.4.1.45.4.7.1.13.11.1.15 | ntnQosDsL2AccessElemDstMacAddrMask | 0 | 0 | This object specifies the bits in a 802 destination address that should be considered when performing a 802 DA comparison against… |
1.3.6.1.4.1.45.4.7.1.13.11.1.16 | ntnQosDsL2AccessElemSrcMacAddr | 0 | 0 | The 802 MAC address against which the 802 MAC SA of incoming traffic streams will be compared. Frames whose 802 MAC SA matches th… |
1.3.6.1.4.1.45.4.7.1.13.11.1.17 | ntnQosDsL2AccessElemSrcMacAddrMask | 0 | 0 | This object specifies the bits in a 802 MAC source address that should be considered when performing a 802 MAC SA comparison agai… |
1.3.6.1.4.1.45.4.7.1.13.11.1.18 | ntnQosDsL2AccessElemVlanIdMin | 0 | 0 | The minimum value that the VLAN ID (VID) in a tagged packet must have in order to match this classifier entry. The ntnQosDsL2Acces… |
1.3.6.1.4.1.45.4.7.1.13.11.1.19 | ntnQosDsL2AccessElemVlanIdMax | 0 | 0 | The maximum value that the VLAN ID (VID) in a tagged packet must have in order to match this classifier entry. The ntnQosDsL2Acces… |
1.3.6.1.4.1.45.4.7.1.13.11.1.20 | ntnQosDsL2AccessElemVlanTag | 0 | 0 | This object indicates the data link layer packet format that frames must have to match this L2 classifier entry. A value of 'untag… |
1.3.6.1.4.1.45.4.7.1.13.11.1.21 | ntnQosDsL2AccessElemEtherType | 0 | 0 | This object specifies the value that will be compared against the value contained in the EtherType field of an IEEE 802 frame. Ex… |
1.3.6.1.4.1.45.4.7.1.13.11.1.22 | ntnQosDsL2AccessElemUserPriority | 0 | 0 | The 802.1p user priority value against which the value contained in the user priority field of a tagged 802.1 frame is compared. … |
1.3.6.1.4.1.45.4.7.1.13.11.1.23 | ntnQosDsL2AccessElemActionDrop | 0 | 0 | This action attribute is used to specify whether a packet should dropped or switched (i.e., not dropped). The value 'drop(1)', whe… |
1.3.6.1.4.1.45.4.7.1.13.11.1.24 | ntnQosDsL2AccessElemActionRemarkDscp | 0 | 0 | This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated I… |
1.3.6.1.4.1.45.4.7.1.13.11.1.25 | ntnQosDsL2AccessElemActionRemarkCos | 0 | 0 | This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame to be updated… |
1.3.6.1.4.1.45.4.7.1.13.11.1.26 | ntnQosDsL2AccessElemActionSetPrec | 0 | 0 | This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop pre… |
1.3.6.1.4.1.45.4.7.1.13.11.1.27 | ntnQosDsL2AccessElemName | 0 | 0 | A label used to reference the access element in a textual manner. All related access elements (e.g., those that comprise an acces… |
1.3.6.1.4.1.45.4.7.1.13.11.1.28 | ntnQosDsL2AccessElemBlock | 0 | 0 | A label used to identify access elements that are members of the same classification block. Access elements are members of the sam… |
1.3.6.1.4.1.45.4.7.1.13.11.1.29 | ntnQosDsL2AccessElemType | 0 | 0 | Identifies the DS/L2 access element type. Designates the higher-level application through which this entry was created. Version 1/… |
1.3.6.1.4.1.45.4.7.1.13.11.1.30 | ntnQosDsL2AccessElemStorage | 0 | 0 | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columna… |
1.3.6.1.4.1.45.4.7.1.13.11.1.31 | ntnQosDsL2AccessElemStatus | 0 | 0 | The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate … |
1.3.6.1.4.1.45.4.7.1.13.11.1.32 | ntnQosDsL2AccessElemEvalPrec | 0 | 0 | An evaluation order attribute used to order elements with the same name and to link elements across DS and L2 Access Element tabl… |
1.3.6.1.4.1.45.4.7.1.13.11.1.33 | ntnQosDsL2AccessElemIpFlags | 0 | 0 | Represents the flags present in an IPv4 header. If a bit that is associated with a specific IP flag is set in this attribute, IPv… |
1.3.6.1.4.1.45.4.7.1.13.11.1.34 | ntnQosDsL2AccessElemTcpCtrlFlags | 0 | 0 | Represents the control flags (code bits) present in an TCP header. If a bit that is associated with a specific TCP control flag i… |
1.3.6.1.4.1.45.4.7.1.13.11.1.35 | ntnQosDsL2AccessElemIpv4Options | 0 | 0 | This object indicates whether the presence, or lack thereof, of IPv4 options in an IPv4 packet should should be considered when l… |
1.3.6.1.4.1.45.4.7.1.13.11.1.36 | ntnQosDsL2AccessElemPktType | 0 | 0 | This object indicates the data link layer frame format that frames must have to match this L2 classifier entry. A value of 'ethern… |
1.3.6.1.4.1.45.4.7.1.13.11.1.37 | ntnQosDsL2AccessElemIvidMin | 0 | 0 | The minimum value that the Inner VLAN ID (Ivid) in a double tagged packet must have in order to match this classifier entry. The n… |
1.3.6.1.4.1.45.4.7.1.13.11.1.38 | ntnQosDsL2AccessElemIvidMax | 0 | 0 | The maximum value that the Inner VLAN ID (Ivid) in a double tagged packet must have in order to match this classifier entry. The n… |
1.3.6.1.4.1.45.4.7.1.13.11.1.39 | ntnQosDsL2AccessElemUnknownUcastFrames | 0 | 0 | If 'true(1)', frames containing an unknown unicast destination address will match this classification entry. A value of 'false(2)… |
1.3.6.1.4.1.45.4.7.1.13.11.1.40 | ntnQosDsL2AccessElemUnknownMcastFrames | 0 | 0 | If 'true(1)', frames containing an unknown multicast destination address will match this classification entry. A value of 'false(2… |
1.3.6.1.4.1.45.4.7.1.13.11.1.41 | ntnQosDsL2AccessElemKnownUcastFrames | 0 | 0 | If 'true(1)', frames containing a known unicast destination address will match this classification entry. A value of 'false(2)' in… |
1.3.6.1.4.1.45.4.7.1.13.11.1.42 | ntnQosDsL2AccessElemKnownMcastFrames | 0 | 0 | If 'true(1)', frames containing a known multicast destination address will match this classification entry. A value of 'false(2)' … |
1.3.6.1.4.1.45.4.7.1.13.11.1.43 | ntnQosDsL2AccessElemBcastFrames | 0 | 0 | If 'true(1)', frames containing a broadcast destination address will match this classification entry. A value of 'false(2)' indica… |
1.3.6.1.4.1.45.4.7.1.13.11.1.44 | ntnQosDsL2AccessElemUnknownIpMcast | 0 | 0 | If 'true(1)', IP packets containing an unknown multicast destination address will match this classification entry. A value of 'fa… |
1.3.6.1.4.1.45.4.7.1.13.11.1.45 | ntnQosDsL2AccessElemKnownIpMcast | 0 | 0 | If 'true(1)', IP packets containing a known multicast destination address will match this classification entry. A value of 'false… |
1.3.6.1.4.1.45.4.7.1.13.11.1.46 | ntnQosDsL2AccessElemNonIpPkt | 0 | 0 | If 'true(1)', non IP packets will match this classification entry. A value of 'false(2)' indicates that no classification is requ… |
1.3.6.1.4.1.45.4.7.1.13.11.1.47 | ntnQosDsL2AccessElemVersion | 0 | 0 | Version indicator for ntnQosDsL2AccessElemTable. |
1.3.6.1.4.1.45.4.7.1.13.11.1.48 | ntnQosDsL2AccessElemUnknownNonIpMcast | 0 | 0 | If 'true(1)', non-IP packets containing an unknown multicast destination address will match this classification entry. A value of… |
1.3.6.1.4.1.45.4.7.1.13.11.1.49 | ntnQosDsL2AccessElemKnownNonIpMcast | 0 | 0 | If 'true(1)', non-IP packets containing a known multicast destination address will match this classification entry. A value of 'f… |
1.3.6.1.4.1.45.4.7.1.13.11.1.50 | ntnQosDsL2AccessElemMasterBlockMember | 0 | 0 | If 'true(1)', attribute values in this DsL2Access element will take precedence over values in other entries when multiple element… |
1.3.6.1.4.1.45.4.7.1.13.11.1.51 | ntnQosDsL2AccessElemMeterType | 0 | 0 | The metering algorithm associated with the rate and burst parameters. Version 1/2 attribute. |
1.3.6.1.4.1.45.4.7.1.13.11.1.52 | ntnQosDsL2AccessElemRate | 0 | 0 | The token-bucket rate, in kilobits per second (kbps). This attribute is used for: CIR for Simple Token Bucket CIR in RFC 2697 for … |
1.3.6.1.4.1.45.4.7.1.13.11.1.53 | ntnQosDsL2AccessElemBurstSize | 0 | 0 | The maximum number of bytes in a single transmission burst. This attribute is used for: Token bucket size for Simple Token Bucket C… |
1.3.6.1.4.1.45.4.7.1.13.11.1.54 | ntnQosDsL2AccessElemOutActionDrop | 0 | 0 | This action attribute is used to specify whether a packet deemed out-of-profile should dropped or switched (i.e., not dropped). The… |
1.3.6.1.4.1.45.4.7.1.13.11.1.55 | ntnQosDsL2AccessElemOutActionRemarkDscp | 0 | 0 | This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated I… |
1.3.6.1.4.1.45.4.7.1.13.11.1.56 | ntnQosDsL2AccessElemOutActionRemarkCos | 0 | 0 | This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame that is deeme… |
1.3.6.1.4.1.45.4.7.1.13.11.1.57 | ntnQosDsL2AccessElemOutActionSetPrec | 0 | 0 | This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop pre… |
1.3.6.1.4.1.45.4.7.1.13.11.1.58 | ntnQosDsL2AccessElemSecondaryRate | 0 | 0 | The token-bucket rate, in kilobits per second (kbps). This attribute is used for: PIR in RFC 2698 for trTCM A rate value equal to … |
1.3.6.1.4.1.45.4.7.1.13.11.1.60 | ntnQosDsL2AccessElemYelActionDrop | 0 | 0 | This action attribute is used to specify whether a packet deemed out-of-profile should dropped or switched (i.e., not dropped). The… |
1.3.6.1.4.1.45.4.7.1.13.11.1.61 | ntnQosDsL2AccessElemYelActionRemarkDscp | 0 | 0 | This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated I… |
1.3.6.1.4.1.45.4.7.1.13.11.1.62 | ntnQosDsL2AccessElemYelActionRemarkCos | 0 | 0 | This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame that is deeme… |
1.3.6.1.4.1.45.4.7.1.13.11.1.63 | ntnQosDsL2AccessElemYelActionSetPrec | 0 | 0 | This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop pre… |