This action attribute, when specified,
will cause the packet being evaluated to
be associated with the specified relative
drop precedence. The relative drop
precedence may be used to determine
traffic precedence relative to other
traffic being processed by the device
and other implementation specific
operations at the egress interface.
A low value for the drop precedence equates
to the traffic receiving a higher priority
in terms of processing. In other words,
when congestion is encountered, packets
with a 'highDropPrec(2)' will be dropped
before packets with a 'lowDropPrec(1)'.
Parsed from file pibNtnEvol_004.mib.txt
Company: baynetworks
Module: NTN-QOS-POLICY-EVOL-PIB
Vendor: Avaya
Module: NTN-QOS-POLICY-EVOL-PIB (NTN-QOS-POLICY-EVOL-PIB.mib)
Type: TABULAR
Access: read-create
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
ntnQosDsAccessElemActionSetPrec OBJECT-TYPE SYNTAX INTEGER { lowDropPrec(1), highDropPrec(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop precedence. The relative drop precedence may be used to determine traffic precedence relative to other traffic being processed by the device and other implementation specific operations at the egress interface. A low value for the drop precedence equates to the traffic receiving a higher priority in terms of processing. In other words, when congestion is encountered, packets with a 'highDropPrec(2)' will be dropped before packets with a 'lowDropPrec(1)'." DEFVAL { lowDropPrec } ::= { ntnQosDsAccessElemEntry 17 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.4.7.1.13.2.1.1 | ntnQosDsAccessElemId | 0 | 0 | An index that enumerates the access element entries. Managers can obtain new values for row creation in this table by reading ntn… |
1.3.6.1.4.1.45.4.7.1.13.2.1.2 | ntnQosDsAccessElemAddrType | 0 | 0 | The type of IP address used by this access element entry. While other types of addresses are defined in the InetAddressType text… |
1.3.6.1.4.1.45.4.7.1.13.2.1.3 | ntnQosDsAccessElemDstAddr | 0 | 0 | The IP address to match against the packet's destination IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefi… |
1.3.6.1.4.1.45.4.7.1.13.2.1.4 | ntnQosDsAccessElemDstPrefixLength | 0 | 0 | The length of the CIDR Prefix carried in ntnQosDsAccessElemDstAddr. In IPv4 addresses, a length of 0 indicates a match of any add… |
1.3.6.1.4.1.45.4.7.1.13.2.1.5 | ntnQosDsAccessElemSrcAddr | 0 | 0 | The IP address to match against the packet's source IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. ntn… |
1.3.6.1.4.1.45.4.7.1.13.2.1.6 | ntnQosDsAccessElemSrcPrefixLength | 0 | 0 | The length of the CIDR Prefix carried in ntnQosDsAccessElemSrcAddr. In IPv4 addresses, a length of 0 indicates a match of any add… |
1.3.6.1.4.1.45.4.7.1.13.2.1.7 | ntnQosDsAccessElemDscp | 0 | 0 | The value that the DSCP in the packet must have to match this entry. A value of -1 indicates that a specific DSCP value has not be… |
1.3.6.1.4.1.45.4.7.1.13.2.1.8 | ntnQosDsAccessElemFlowId | 0 | 0 | The flow identifier in an IPv6 header. |
1.3.6.1.4.1.45.4.7.1.13.2.1.9 | ntnQosDsAccessElemProtocol | 0 | 0 | The IP protocol to match against the IPv4 protocol number or the IPv6 Next-Header number in the packet. A value of 255 means matc… |
1.3.6.1.4.1.45.4.7.1.13.2.1.10 | ntnQosDsAccessElemDstL4PortMin | 0 | 0 | The minimum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. |
1.3.6.1.4.1.45.4.7.1.13.2.1.11 | ntnQosDsAccessElemDstL4PortMax | 0 | 0 | The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This … |
1.3.6.1.4.1.45.4.7.1.13.2.1.12 | ntnQosDsAccessElemSrcL4PortMin | 0 | 0 | The minimum value that the layer-4 source port number in the packet must have in order to match this classifier entry. |
1.3.6.1.4.1.45.4.7.1.13.2.1.13 | ntnQosDsAccessElemSrcL4PortMax | 0 | 0 | The maximum value that the layer-4 source port number in the packet must have in order to match this classifier entry. This value… |
1.3.6.1.4.1.45.4.7.1.13.2.1.14 | ntnQosDsAccessElemActionDrop | 0 | 0 | This action attribute is used to specify whether a packet should dropped or switched (i.e., not dropped). The value 'drop(1)', whe… |
1.3.6.1.4.1.45.4.7.1.13.2.1.15 | ntnQosDsAccessElemActionRemarkDscp | 0 | 0 | This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated I… |
1.3.6.1.4.1.45.4.7.1.13.2.1.16 | ntnQosDsAccessElemActionRemarkCos | 0 | 0 | This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame to be updated… |
1.3.6.1.4.1.45.4.7.1.13.2.1.18 | ntnQosDsAccessElemName | 0 | 0 | A label used to reference the access element in a textual manner. All related access elements (e.g., those that comprise an acces… |
1.3.6.1.4.1.45.4.7.1.13.2.1.19 | ntnQosDsAccessElemBlock | 0 | 0 | A label used to identify access elements that are members of the same classification block. Access elements are members of the sam… |
1.3.6.1.4.1.45.4.7.1.13.2.1.20 | ntnQosDsAccessElemType | 0 | 0 | Identifies the DS access element type. Designates the higher-level application through which this entry was created. |
1.3.6.1.4.1.45.4.7.1.13.2.1.21 | ntnQosDsAccessElemStorage | 0 | 0 | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columna… |
1.3.6.1.4.1.45.4.7.1.13.2.1.22 | ntnQosDsAccessElemStatus | 0 | 0 | The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate … |
1.3.6.1.4.1.45.4.7.1.13.2.1.23 | ntnQosDsAccessElemEvalPrec | 0 | 0 | An evaluation order attribute used to order elements with the same name and to link elements across DS and L2 Access Element tabl… |