This action component, when specified,
will cause the value contained in the
Differentiated Services (DS) field of an
associated IP datagram that is deemed to
be out-of-profile to be updated with the
value of this object.
A value of -1 indicates that the DSCP
field should not be updated.
Applies to yellow actions.
Parsed from file pibNtnEvol_004.mib.txt
Company: baynetworks
Module: NTN-QOS-POLICY-EVOL-PIB
Vendor: Avaya
Module: NTN-QOS-POLICY-EVOL-PIB (NTN-QOS-POLICY-EVOL-PIB.mib)
Type: TABULAR
Access: read-create
Syntax: Integer32
(
-1..63 )
Automatically extracted from www.mibdepot.com
ntnQosAccessAsgnYelActionRemarkDscp OBJECT-TYPE SYNTAX Integer32 (-1..63) MAX-ACCESS read-create STATUS current DESCRIPTION "This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated IP datagram that is deemed to be out-of-profile to be updated with the value of this object. A value of -1 indicates that the DSCP field should not be updated. Applies to yellow actions." DEFVAL { -1 } ::= { ntnQosAccessAsgnEntry 19 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.4.7.1.13.6.1.1 | ntnQosAccessAsgnId | 0 | 0 | An index that enumerates the access assignment entries. Managers can obtain new values for row creation in this table by reading … |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.2 | ntnQosAccessAsgnAclType | 0 | 0 | Identifies the type of access element that is being referenced. |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.3 | ntnQosAccessAsgnName | 0 | 0 | A label used to reference an access assignment in a textual manner. This label, coupled with the access element type identifier a… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.4 | ntnQosAccessAsgnIfIndex | 0 | 0 | The interface to which the identified access element is to be applied, specified in terms of an ifIndex value. A value of 0 indica… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.5 | ntnQosAccessAsgnRate | 0 | 0 | The token-bucket rate, in kilobits per second (kbps). This attribute is used for: CIR for Simple Token Bucket CIR in RFC 2697 for … |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.6 | ntnQosAccessAsgnBurstSize | 0 | 0 | The maximum number of bytes in a single transmission burst. This attribute is used for: Token bucket size for Simple Token Bucket C… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.7 | ntnQosAccessAsgnOutActionDrop | 0 | 0 | This action attribute is used to specify whether a packet deemed out-of-profile should dropped or switched (i.e., not dropped). The… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.8 | ntnQosAccessAsgnOutActionRemarkDscp | 0 | 0 | This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated I… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.9 | ntnQosAccessAsgnOutActionRemarkCos | 0 | 0 | This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame that is deeme… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.10 | ntnQosAccessAsgnOutActionSetPrec | 0 | 0 | This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop pre… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.11 | ntnQosAccessAsgnStatsType | 0 | 0 | The type of statistics tracking used by this access assignment. The value of this attribute dictates the amount of statistics tra… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.12 | ntnQosAccessAsgnStorage | 0 | 0 | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columna… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.13 | ntnQosAccessAsgnStatus | 0 | 0 | The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate … |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.14 | ntnQosAccessAsgnNonMatchActionDrop | 0 | 0 | This action attribute is used to specify whether a packet deemed out-of-profile should dropped or switched (i.e., not dropped). The… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.15 | ntnQosAccessAsgnMeterType | 0 | 0 | The metering algorithm associated with the rate and burst parameters. The number and type of algorithms supported is implementatio… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.16 | ntnQosAccessAsgnSecondaryRate | 0 | 0 | The token-bucket rate, in kilobits per second (kbps). This attribute is used for: PIR in RFC 2698 for trTCM A rate value equal to … |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.17 | ntnQosAccessAsgnSecondaryBurstSize | 0 | 0 | The maximum number of bytes in a single transmission burst. This attribute is used for: EBS in RFC 2697 for srTCM PBS in RFC 2698 f… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.18 | ntnQosAccessAsgnYelActionDrop | 0 | 0 | This action attribute is used to specify whether a packet deemed out-of-profile should dropped or switched (i.e., not dropped). The… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.20 | ntnQosAccessAsgnYelActionRemarkCos | 0 | 0 | This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame that is deeme… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.21 | ntnQosAccessAsgnYelActionSetPrec | 0 | 0 | This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop pre… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.22 | ntnQosAccessAsgnSetPriority | 0 | 0 | Supports filter set prioritization when multiple filters sets may be associated with an entity (e.g., user, interface) but only on… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.23 | ntnQosAccessAsgnMeteringMode | 0 | 0 | Identifies the metering mode requested for the identified filter set. A value of 'noMetering(1)' indicates that metering is not re… |