Setting this object causes the agent to instruct
the UPS to perform a UNIX Shutdown in the indicated
number of seconds. The agent counts down the number
of seconds until the event will take place. A Unix
shutdown is only valid if the UPS is on Battery.
During a UNIX Shutdown, the UPS will turn off the
output even if the Utility comes back on line before
the shutdown time arrives. Note that different models
have different clock resolutions, usually greater
than 1 second. As a result, the command will only
be accurate to the resolution of the UPS's clock.
The command can be cancelled by setting
lcUpsControlCancelCommand to the value 'cancel'.
Parsed from file LIEB_G.MIB.txt
Company: None
Module: LIEBERT-UPSTATION-G-UPS-MIB
Setting this object causes the agent to instruct
the UPS to perform a UNIX Shutdown in the indicated
number of seconds. The agent counts down the number
of seconds until the event will take place. A Unix
shutdown is only valid if the UPS is on Battery.
During a UNIX Shutdown, the UPS will turn off the
output even if the Utility comes back on line before
the shutdown time arrives. Note that different models
have different clock resolutions, usually greater
than 1 second. As a result, the command will only
be accurate to the resolution of the UPS's clock.
The command can be cancelled by setting
lcUpsControlCancelCommand to the value 'cancel'.
Parsed from file LIEBERT-UPSTATION-S3-UPS-MIB.mib
Module: LIEBERT-UPSTATION-S3-UPS-MIB
Vendor: Emerson Computer PowerRoger Draper
Module: LIEBERT-MICRO-UPS-MIB
[Automatically extracted from oidview.com]
lcUpsControlUnixShutdownDelay OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-write STATUS optional DESCRIPTION "Setting this object causes the agent to instruct the UPS to perform a UNIX Shutdown in the indicated number of seconds. The agent counts down the number of seconds until the event will take place. A Unix shutdown is only valid if the UPS is on Battery. During a UNIX Shutdown, the UPS will turn off the output even if the Utility comes back on line before the shutdown time arrives. Note that different models have different clock resolutions, usually greater than 1 second. As a result, the command will only be accurate to the resolution of the UPS's clock. The command can be cancelled by setting lcUpsControlCancelCommand to the value 'cancel'." ::= { lcUpsControl 5 }
lcUpsControlUnixShutdownDelay OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-write STATUS optional DESCRIPTION "Setting this object causes the agent to instruct the UPS to perform a UNIX Shutdown in the indicated number of seconds. The agent counts down the number of seconds until the event will take place. A Unix shutdown is only valid if the UPS is on Battery. During a UNIX Shutdown, the UPS will turn off the output even if the Utility comes back on line before the shutdown time arrives. Note that different models have different clock resolutions, usually greater than 1 second. As a result, the command will only be accurate to the resolution of the UPS's clock. The command can be cancelled by setting lcUpsControlCancelCommand to the value 'cancel'." ::= { lcUpsControl 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.476.1.1.1.1.8.5.0 | lcUpsControlUnixShutdownDelay | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.476.1.1.1.1.8.1 | lcUpsControlOutputOffDelay | 1 | 1 | Setting this object causes the agent to instruct the UPS to turn off the output after the indicated number of seconds. The agent… |
1.3.6.1.4.1.476.1.1.1.1.8.2 | lcUpsControlOutputOnDelay | 1 | 1 | Setting this object causes the agent to instruct the UPS to turn on the output after the indicated number of seconds. The agent … |
1.3.6.1.4.1.476.1.1.1.1.8.3 | lcUpsControlOutputOffTrapDelay | 1 | 1 | lcUpsControlOutputOfftrapDelay |
1.3.6.1.4.1.476.1.1.1.1.8.4 | lcUpsControlOutputOnTrapDelay | 1 | 1 | When 'lcUpsControlOutputOnDelay' reaches a value less than or equal to this object's value, an lcUpsOutputOnWarningTrap will be p… |
1.3.6.1.4.1.476.1.1.1.1.8.6 | lcUpsControlUnixShutdownTrapDelay | 1 | 1 | When 'lcUpsControlUnixShutdownDelay' reaches a value less than or equal to this object's value, an lcUpsUnixShutdownWarningTrap w… |
1.3.6.1.4.1.476.1.1.1.1.8.7 | lcUpsControlCancelCommands | 1 | 1 | Setting this variable to 'cancel' will cause the agent to issue instructions to the UPS to cancel all outstanding commands, such … |
1.3.6.1.4.1.476.1.1.1.1.8.8 | lcUpsControlRebootAgentDelay | 1 | 1 | Setting this object causes the agent to reboot after the indicated number of seconds have expired. The value will count down unt… |