This sub-tree is used to register a source PDU 2 input as a
well known measurement point. It is intended that no sub-trees
be created below this node.
Power input to the managed device from power distribution
unit 1. Many power systems contain more than one input source
and many of them have more than one measurement point per input
source. This identifier represents one input source for the
system but does not necessarily represent the 'first' one.
The input sources' numbering with respect to
'lgpPwrSourcePdu2Input' etc. may depend on the physical wiring
of the system when it was installed.
Parsed from file LIEBERT_GP_POWER.MIB.txt
Company: None
Module: LIEBERT-GP-POWER-MIB
This sub-tree is used to register a source PDU 2 input as a
well known measurement point. It is intended that no sub-trees
be created below this node.
Power input to the managed device from power distribution
unit 1. Many power systems contain more than one input source
and many of them have more than one measurement point per input
source. This identifier represents one input source for the
system but does not necessarily represent the 'first' one.
The input sources' numbering with respect to
'lgpPwrSourcePdu2Input' etc. may depend on the physical wiring
of the system when it was installed.
Parsed from file LIEBERT-GP-POWER-MIB.mib
Module: LIEBERT-GP-POWER-MIB
Vendor: Emerson Computer PowerRoger Draper
Module: LIEBERT-GP-POWER-MIB
[Automatically extracted from oidview.com]
lgpPwrSourcePdu2Input OBJECT-IDENTITY STATUS current DESCRIPTION "This sub-tree is used to register a source PDU 2 input as a well known measurement point. It is intended that no sub-trees be created below this node. Power input to the managed device from power distribution unit 1. Many power systems contain more than one input source and many of them have more than one measurement point per input source. This identifier represents one input source for the system but does not necessarily represent the 'first' one. The input sources' numbering with respect to 'lgpPwrSourcePdu2Input' etc. may depend on the physical wiring of the system when it was installed." ::= { lgpPwrWellKnownMeasurementPoints 4 }
lgpPwrSourcePdu2Input OBJECT-IDENTITY STATUS current DESCRIPTION "This sub-tree is used to register a source PDU 2 input as a well known measurement point. It is intended that no sub-trees be created below this node. Power input to the managed device from power distribution unit 1. Many power systems contain more than one input source and many of them have more than one measurement point per input source. This identifier represents one input source for the system but does not necessarily represent the 'first' one. The input sources' numbering with respect to 'lgpPwrSourcePdu2Input' etc. may depend on the physical wiring of the system when it was installed." ::= { lgpPwrWellKnownMeasurementPoints 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.476.1.42.3.5.2.1.1 | lgpPwrSource1Input | 0 | 0 | This sub-tree is used to register a source 1 input as a well known measurement point. It is intended that no sub-trees be create… |
| 1.3.6.1.4.1.476.1.42.3.5.2.1.2 | lgpPwrSource2Input | 0 | 0 | This sub-tree is used to register a source 2 input as a well known measurement point. It is intended that no sub-trees be create… |
| 1.3.6.1.4.1.476.1.42.3.5.2.1.3 | lgpPwrSourcePdu1Input | 0 | 0 | This sub-tree is used to register a source PDU 1 input as a well known measurement point. It is intended that no sub-trees be cr… |
| 1.3.6.1.4.1.476.1.42.3.5.2.1.5 | lgpPwrOutputToLoad | 0 | 0 | This sub-tree is used to register the output to the critical load as a well known measurement point. It is intended that no sub-… |
| 1.3.6.1.4.1.476.1.42.3.5.2.1.6 | lgpPwrMeasBattery | 0 | 0 | This sub-tree is used to register a battery as a well known measurement point. It is intended that no sub-trees be created below… |
| 1.3.6.1.4.1.476.1.42.3.5.2.1.7 | lgpPwrMeasBypass | 0 | 0 | This sub-tree is used to register a bypass as a well known measurement point. It is intended that no sub-trees be created below … |
| 1.3.6.1.4.1.476.1.42.3.5.2.1.8 | lgpPwrMeasDcBus | 0 | 0 | This sub-tree is used to register a DC bus as a well known measurement point. It is intended that no sub-trees be created below … |
| 1.3.6.1.4.1.476.1.42.3.5.2.1.9 | lgpPwrMeasSystemOutput | 0 | 0 | This sub-tree is used to register the output of a multi-module system as a well known measurement point. It is intended that no s… |
| 1.3.6.1.4.1.476.1.42.3.5.2.1.10 | lgpPwrMeasBatteryCabinet | 0 | 0 | This sub-tree is used to register the voltage between the most negative and the most postive terminals of a battery cabinet. To d… |