Defines a larger imageable area which affects the default placement
of the scaling points P1 and P2.
Choices
On: Turn on expand mode
Off: Use default scaling points, plotting range, and
plotting area.
Default
Off
Notes
The available range of plotter units for a particular
media size is only partially determined by setting the
Expand Mode to On. When the printer/plotter senses
the media size it automatically sets the hard clip limit to
15mm on three sides and 39 mm on the fourth. If
Expand Mode is On, then the hard clip limits are set to
5mm on three sides and 29 mm on the fourth side. This
is what allows you to define a larger imageable area.
The HP-GL emulation senses the media type if the
paper type is set to Scale to Paper. It is also possible to
have the HP-GL emulation use a particular media size
by setting Original Paper Type through the control panel
or by using a Document Option Command.
Parsed from file QMS-MIB.mib
Module: QMS-MIB
Vendor: QMS, Inc.
Module: QMS-MIB
[Automatically extracted from oidview.com]
qmsHPGLExpandMode OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines a larger imageable area which affects the default placement of the scaling points P1 and P2. Choices On: Turn on expand mode Off: Use default scaling points, plotting range, and plotting area. Default Off Notes The available range of plotter units for a particular media size is only partially determined by setting the Expand Mode to On. When the printer/plotter senses the media size it automatically sets the hard clip limit to 15mm on three sides and 39 mm on the fourth. If Expand Mode is On, then the hard clip limits are set to 5mm on three sides and 29 mm on the fourth side. This is what allows you to define a larger imageable area. The HP-GL emulation senses the media type if the paper type is set to Scale to Paper. It is also possible to have the HP-GL emulation use a particular media size by setting Original Paper Type through the control panel or by using a Document Option Command." ::= { qmsHPGL 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.480.1.524.2 | qmsHPGLPaperType | 0 | 0 | Identifies the original image's paper size. Choices A-(8.5''x 11''-216 x 279 mm), A0-(33.11'' x 46.81''-841 x 1189 mm) A1-(23.39'' … |
| 1.3.6.1.4.1.480.1.524.12 | qmsHPGLPlotter | 0 | 0 | Identifies the HP-GL plotter type. Choices 7475A 7470A Colorpro 7550A DraftMaster: Supports architectural and engineering paper sizes … |
| 1.3.6.1.4.1.480.1.524.13 | qmsHPGLScalingPercent | 0 | 0 | Identifies the percentage to reduce or enlarge an image. Choices 001-150 (1-150%) Default 100 (100%) Note: To scale plots, select th… |
| 1.3.6.1.4.1.480.1.524.14 | qmsHPGLEnhancedMode | 0 | 0 | Increases the resolution of the grid for downloaded characters. The HP-GL UC (User-defined Character) command allows you to down… |
| 1.3.6.1.4.1.480.1.524.16 | qmsHPGLPenWidth1 | 0 | 0 | Sets the width for pen 1. Each pen has a width option available. Choices 0-60 (0.0-6.0 mm) Default Pen 1-7 (0.7 mm) Note A choice of 0… |
| 1.3.6.1.4.1.480.1.524.17 | qmsHPGLPenWidth2 | 0 | 0 | Sets the width for pen 2. Each pen has a width option available. Choices 0-60 (0.0-6.0 mm) Default Pen 2-3 (0.3 mm) Note A choice of 0… |
| 1.3.6.1.4.1.480.1.524.18 | qmsHPGLPenWidth3 | 0 | 0 | Sets the width for pen 3. Each pen has a width option available. Choices 0-60 (0.0-6.0 mm) Default Pen 3-3 (0.3 mm) Note A choice of 0… |
| 1.3.6.1.4.1.480.1.524.19 | qmsHPGLPenWidth4 | 0 | 0 | Sets the width for pen 4. Each pen has a width option available. Choices 0-60 (0.0-6.0 mm) Default Pen 4-3 (0.3 mm) Note A choice of 0… |
| 1.3.6.1.4.1.480.1.524.20 | qmsHPGLPenWidth5 | 0 | 0 | Sets the width for pen 5. Each pen has a width option available. Choices 0-60 (0.0-6.0 mm) Default Pen 5-3 (0.3 mm) Note A choice of 0… |
| 1.3.6.1.4.1.480.1.524.21 | qmsHPGLPenWidth6 | 0 | 0 | Sets the width for pen 6. Each pen has a width option available. Choices 0-60 (0.0-6.0 mm) Default Pen 6-3 (0.3 mm) Note A choice of 0… |
| 1.3.6.1.4.1.480.1.524.22 | qmsHPGLPenWidth7 | 0 | 0 | Sets the width for pen 7. Each pen has a width option available. Choices 0-60 (0.0-6.0 mm) Default Pen 7-3 (0.3 mm) Note A choice of 0… |
| 1.3.6.1.4.1.480.1.524.23 | qmsHPGLPenWidth8 | 0 | 0 | Sets the width for pen 8. Each pen has a width option available. Choices 0-60 (0.0-6.0 mm) Default Pen 8-3 (0.3 mm) Note A choice of 0… |
| 1.3.6.1.4.1.480.1.524.24 | qmsHPGLPenColor1 | 0 | 0 | Sets color for pen 1. Each pen has a color option available. Choices Black, Blue, Brown, Cyan, Gray-25%, Gray-50%, Gray- 75%, Gree… |
| 1.3.6.1.4.1.480.1.524.25 | qmsHPGLPenColor2 | 0 | 0 | Sets color for pen 2. Each pen has a color option available. Choices Black, Blue, Brown, Cyan, Gray-25%, Gray-50%, Gray- 75%, Green… |
| 1.3.6.1.4.1.480.1.524.26 | qmsHPGLPenColor3 | 0 | 0 | Sets color for pen 3. Each pen has a color option available. Choices Black, Blue, Brown, Cyan, Gray-25%, Gray-50%, Gray- 75%, Gree… |
| 1.3.6.1.4.1.480.1.524.27 | qmsHPGLPenColor4 | 0 | 0 | Sets color for pen 4. Each pen has a color option available. Choices Black, Blue, Brown, Cyan, Gray-25%, Gray-50%, Gray- 75%, Gree… |
| 1.3.6.1.4.1.480.1.524.28 | qmsHPGLPenColor5 | 0 | 0 | Sets color for pen 5. Each pen has a color option available. Choices Black, Blue, Brown, Cyan, Gray-25%, Gray-50%, Gray- 75%, Gree… |
| 1.3.6.1.4.1.480.1.524.29 | qmsHPGLPenColor6 | 0 | 0 | Sets color for pen 6. Each pen has a color option available. Choices Black, Blue, Brown, Cyan, Gray-25%, Gray-50%, Gray- 75%, Gree… |
| 1.3.6.1.4.1.480.1.524.30 | qmsHPGLPenColor7 | 0 | 0 | Sets color for pen 7. Each pen has a color option available. Choices Black, Blue, Brown, Cyan, Gray-25%, Gray-50%, Gray- 75%, Gree… |
| 1.3.6.1.4.1.480.1.524.31 | qmsHPGLPenColor8 | 0 | 0 | Sets color for pen 8. Each pen has a color option available. Choices Black, Blue, Brown, Cyan, Gray-25%, Gray-50%, Gray- 75%, Gree… |