Vendor: Sync Research, Inc.
Module: SYNC-RESEARCH-MIB
[Automatically extracted from oidview.com]
bridgeConfigGroup OBJECT IDENTIFIER ::= { nodeBridgeGroup 1 }
bridgeConfigGroup OBJECT IDENTIFIER ::= { nodeBridgeGroup 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.3.3.1.1 | brEnableBridging | 1 | 1 | This flag indicates if bridging is to be performed on this unit. The default value for this field is 'No' |
| 1.3.6.1.4.1.485.3.3.1.2 | bridgePriority | 1 | 1 | Sometimes referred to as the ROOT id. Determines the priority component of the Bridge identifier used in determining the Root Bri… |
| 1.3.6.1.4.1.485.3.3.1.3 | brMaxAge | 1 | 1 | The time at which a configuration message is descarded. Units are in seconds. Default value is 10 seconds |
| 1.3.6.1.4.1.485.3.3.1.4 | brHelloTimer | 1 | 1 | The time interval between issuing configuration messages. Units are seconds. Default value is 2 seconds |
| 1.3.6.1.4.1.485.3.3.1.5 | brFilterIPX | 1 | 1 | If set to yes, all IPX frames are filtered (if bridge is enabled). Default is no. |
| 1.3.6.1.4.1.485.3.3.1.6 | brFilterIP | 1 | 1 | If set to yes, all IP frames are filtered (if bridging is enabled). Default is no. |
| 1.3.6.1.4.1.485.3.3.1.7 | brFilterNetBIOS | 1 | 1 | If set to yes, all NetBIOS frames are filtered (if bridging is enabled). Default is no. |
| 1.3.6.1.4.1.485.3.3.1.8 | brFilterLLC2 | 1 | 1 | If set to yes, all LAN attached SNA LLC2 frames are filtered (if bridging is enabled). Default is no. |
| 1.3.6.1.4.1.485.3.3.1.9 | brFilterSMAN | 1 | 1 | If set to yes, all SyncManager LLC2 frames are filtered (if bridging is enabled). Default is no. |
| 1.3.6.1.4.1.485.3.3.1.10 | brForwardOther | 1 | 1 | If set to yes, all other frames are forwarded (if bridging is enabled). Default is No. |
| 1.3.6.1.4.1.485.3.3.1.11 | brIPXtargetPort | 1 | 1 | If IPX filtering is set to no, then this parameter defines a specific FR port to deliver IPX frames to. Used in conjunction with … |
| 1.3.6.1.4.1.485.3.3.1.12 | brIPXtargetDLCI | 1 | 1 | If IPX filtering is set to no, then this parameter defines a specific FR DLCI to deliver IPX frames to. Used in conjunction with … |
| 1.3.6.1.4.1.485.3.3.1.13 | brIPtargetPort | 1 | 1 | If IP filtering is set to no, then this parameter defines a specific FR port to deliver IP frames to. Used in conjunction with br… |
| 1.3.6.1.4.1.485.3.3.1.14 | brIPtargetDLCI | 1 | 1 | If IP filtering is set to no, then this parameter defines a specific FR DLCI to deliver IP frames to. Used in conjunction with br… |
| 1.3.6.1.4.1.485.3.3.1.15 | brNetBIOStargetPort | 1 | 1 | If NetBIOS filtering is set to no, then this parameter defines a specific FR port to deliver NetBIOS frames to. Used in conjuncti… |
| 1.3.6.1.4.1.485.3.3.1.16 | brNetBIOStargetDLCI | 1 | 1 | If NetBIOS filtering is set to no, then this parameter defines a specific FR DLCI to deliver NetBIOS frames to. Used in conjuncti… |
| 1.3.6.1.4.1.485.3.3.1.17 | brLLC2targetPort | 1 | 1 | If SNA LLC2 filtering is set to no, then this parameter defines a specific FR port to deliver LLC2 frames to. Used in conjunction… |
| 1.3.6.1.4.1.485.3.3.1.18 | brLLC2targetDLCI | 1 | 1 | If SNA LLC2 filtering is set to no, then this parameter defines a specific FR DLCI to deliver LLC2 frames to. Used in conjunction… |
| 1.3.6.1.4.1.485.3.3.1.19 | brOthertargetPort | 1 | 1 | If Other forwarding is set to yes, then this parameter defines a specific FR port to deliver Other frames to. Used in conjunction… |
| 1.3.6.1.4.1.485.3.3.1.20 | brOthertargetDLCI | 1 | 1 | If Other forwarding is set to yes, then this parameter defines a specific FR DLCI to deliver Other frames to. Used in conjunction… |
| 1.3.6.1.4.1.485.3.3.1.21 | brSerialPriority | 1 | 1 | This parameter defines the transmit priority for Frame Relay of serial attached port traffic. |
| 1.3.6.1.4.1.485.3.3.1.22 | brTerminatedLLC2Priority | 1 | 1 | This parameter defines the transmit priority for Frame Relay of terminated LLC2 traffic. |
| 1.3.6.1.4.1.485.3.3.1.23 | brLLC2Priority | 1 | 1 | This parameter defines the transmit priority for Frame Relay of SNA LLC2 traffic. |
| 1.3.6.1.4.1.485.3.3.1.24 | brIPXPriority | 1 | 1 | This parameter defines the transmit priority for Frame Relay of IPX traffic. |
| 1.3.6.1.4.1.485.3.3.1.25 | brIPPriority | 1 | 1 | This parameter defines the transmit priority for Frame Relay of IP traffic. |
| 1.3.6.1.4.1.485.3.3.1.26 | brNetBIOSPriority | 1 | 1 | This parameter defines the transmit priority for Frame Relay of NetBIOS traffic. |
| 1.3.6.1.4.1.485.3.3.1.27 | brOtherPriority | 1 | 1 | This parameter defines the transmit priority for Frame Relay of other traffic. |
| 1.3.6.1.4.1.485.3.3.1.28 | brHighPriorityBandwidth | 1 | 1 | This parameter defines the high priority bandwidth. The sum of high, medium, and low priority bandwidth cannot exceed 100. Default… |
| 1.3.6.1.4.1.485.3.3.1.29 | brMediumPriorityBandwidth | 1 | 1 | This parameter defines the medium priority bandwidth. The sum of high, medium, and low priority bandwidth cannot exceed 100. Defau… |
| 1.3.6.1.4.1.485.3.3.1.30 | brLowPriorityBandwidth | 1 | 1 | This parameter defines the low priority bandwidth. The sum of high, medium, and low priority bandwidth cannot exceed 100. Default … |
| 1.3.6.1.4.1.485.3.3.1.31 | brDelayTimer | 0 | 0 | This field, expressed in seconds, specifies the maximum number of seconds a bridge frame can live in the unit. If a bridge frame … |
| 1.3.6.1.4.1.485.3.3.1.32 | brEnableIPXBridging | 0 | 0 | This flag indicates if IPX bridging is to be performed on this unit. Applicable to Frame Nodes only. The default value for this … |
| 1.3.6.1.4.1.485.3.3.1.33 | brEnableIPBridging | 0 | 0 | This flag indicates if IP bridging is to be performed on this unit. Applicable to Frame Nodes only. The default value for this f… |
| 1.3.6.1.4.1.485.3.3.1.34 | brEnableNetBiosBridging | 0 | 0 | This flag indicates if NetBios bridging is to be performed on this unit. Applicable to Frame Nodes only. The default value for t… |
| 1.3.6.1.4.1.485.3.3.1.35 | brEnableSNABridging | 0 | 0 | This flag indicates if SNA bridging is to be performed on this unit. Applicable to Frame Nodes only. The default value for this … |
| 1.3.6.1.4.1.485.3.3.1.36 | brEnableSyncManBridging | 0 | 0 | This flag indicates if Sync/Man bridging is to be performed on this unit. Applicable to Frame Nodes only. The default value for … |
| 1.3.6.1.4.1.485.3.3.1.37 | brEnableOtherBridging | 0 | 0 | This flag indicates if any other traffic bridging is to be performed on this unit. Applicable to Frame Nodes only. The default v… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.3.3.2 | bridgeStatsGroup | 1 | 7 | None |