CSU 'ones density' monitor. Defines the maximum number of
consecutive zeros that can be transmitted to the WAN.
If density monitoring is enabled, the composite signal
is guaranteed to meet the selected density threshhold at
the expense of user data.
(1) No Density Monitoring - unit will transparently transmit
user data without regard for ones density. Recommended for
use in B8ZS applications, in nx56K applications where
bit-7 stuffing is configured for DTE Channel Density, and
when an external CSU is used.
(2) 12.5% - unit will maintain a sliding window and will assure
a minumum of 12.5% or an average of 1 in 8 ones.
(3) 1 in 16 - unit will guarantee that no more than 15 consecutive
zeros will be transmit to the WAN.
(4) 1 in 64 - unit will guarantee that no more than 63 consecutive
zeros will be transmit to the WAN.
Parsed from file TFRAP.MIB.txt
Company: None
Module: TFRAP-MIB
CSU 'ones density' monitor. Defines the maximum number of
consecutive zeros that can be transmitted to the WAN.
If density monitoring is enabled, the composite signal
is guaranteed to meet the selected density threshhold at
the expense of user data.
(1) No Density Monitoring - unit will transparently transmit
user data without regard for ones density. Recommended for
use in B8ZS applications, in nx56K applications where
bit-7 stuffing is configured for DTE Channel Density, and
when an external CSU is used.
(2) 12.5% - unit will maintain a sliding window and will assure
a minumum of 12.5% or an average of 1 in 8 ones.
(3) 1 in 16 - unit will guarantee that no more than 15 consecutive
zeros will be transmit to the WAN.
(4) 1 in 64 - unit will guarantee that no more than 63 consecutive
zeros will be transmit to the WAN.
Parsed from file TFRAP-MIB.mib
Module: TFRAP-MIB
Vendor: Sync Research, Inc.
Module: TFRAP-MIB
[Automatically extracted from oidview.com]
tfrapCfgT1Density OBJECT-TYPE SYNTAX INTEGER { no-density (1), twelve-half-percent (2), one-in-16 (3), one-in-64 (4) } ACCESS read-write STATUS mandatory DESCRIPTION "CSU 'ones density' monitor. Defines the maximum number of consecutive zeros that can be transmitted to the WAN. If density monitoring is enabled, the composite signal is guaranteed to meet the selected density threshhold at the expense of user data. (1) No Density Monitoring - unit will transparently transmit user data without regard for ones density. Recommended for use in B8ZS applications, in nx56K applications where bit-7 stuffing is configured for DTE Channel Density, and when an external CSU is used. (2) 12.5% - unit will maintain a sliding window and will assure a minumum of 12.5% or an average of 1 in 8 ones. (3) 1 in 16 - unit will guarantee that no more than 15 consecutive zeros will be transmit to the WAN. (4) 1 in 64 - unit will guarantee that no more than 63 consecutive zeros will be transmit to the WAN." ::= { tfrapCfgT1Table 3 }
tfrapCfgT1Density OBJECT-TYPE SYNTAX INTEGER { no-density (1), twelve-half-percent (2), one-in-16 (3), one-in-64 (4) } ACCESS read-write STATUS mandatory DESCRIPTION "CSU 'ones density' monitor. Defines the maximum number of consecutive zeros that can be transmitted to the WAN. If density monitoring is enabled, the composite signal is guaranteed to meet the selected density threshhold at the expense of user data. (1) No Density Monitoring - unit will transparently transmit user data without regard for ones density. Recommended for use in B8ZS applications, in nx56K applications where bit-7 stuffing is configured for DTE Channel Density, and when an external CSU is used. (2) 12.5% - unit will maintain a sliding window and will assure a minumum of 12.5% or an average of 1 in 8 ones. (3) 1 in 16 - unit will guarantee that no more than 15 consecutive zeros will be transmit to the WAN. (4) 1 in 64 - unit will guarantee that no more than 63 consecutive zeros will be transmit to the WAN." ::= { tfrapCfgT1Table 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.5.2.3.3.0 | tfrapCfgT1Density | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.5.2.3.1 | tfrapCfgT1Framing | 1 | 1 | Type of Framing on this T1 Line. Check with your service provider to determine value. (1) D4 - also known as Superframe or SF. (… |
| 1.3.6.1.4.1.485.5.2.3.2 | tfrapCfgT1LineEncoding | 1 | 1 | T1 interface bipolar encoding scheme. Check with your service provider to determine value. B8ZS, which inherently provides ample… |
| 1.3.6.1.4.1.485.5.2.3.4 | tfrapCfgT1Interface | 1 | 1 | Enables the unit's internal CSU functionality. Typical network access requires a CSU to condition the WAN signal, guard against n… |
| 1.3.6.1.4.1.485.5.2.3.5 | tfrapCfgT1LboSetting | 1 | 1 | CSU Line Build Out (LBO). This feature provides selectable output signal strength. Consult service provider for proper setting. … |