This indicates the current status of LMI Auto Sensing if
it's enabled.
(1) Disabled: LMI is configured as Type 1, Annex-D, or Annex-A
(2) Searching: unit is attempting to determine the LMI type of
the attached equipment by issuing LMI messages of each LMI
type and searching for responses.
(3) Learned Annex-D: unit has successfully detected Annex-D LMI
(ANSI T1.617 Annex D)
(4) Learned Annex-A: unit has successfully detected Annex-A LMI
(ITU/CCITT Q.933 Annex A)
(5) Learned Type 1: unit has successfully detected Type 1 LMI
(Cisco, Group of four, LMI)
Parsed from file TFRAP.MIB.txt
Company: None
Module: TFRAP-MIB
This indicates the current status of LMI Auto Sensing if
it's enabled.
(1) Disabled: LMI is configured as Type 1, Annex-D, or Annex-A
(2) Searching: unit is attempting to determine the LMI type of
the attached equipment by issuing LMI messages of each LMI
type and searching for responses.
(3) Learned Annex-D: unit has successfully detected Annex-D LMI
(ANSI T1.617 Annex D)
(4) Learned Annex-A: unit has successfully detected Annex-A LMI
(ITU/CCITT Q.933 Annex A)
(5) Learned Type 1: unit has successfully detected Type 1 LMI
(Cisco, Group of four, LMI)
Parsed from file TFRAP-MIB.mib
Module: TFRAP-MIB
Vendor: Sync Research, Inc.
Module: TFRAP-MIB
[Automatically extracted from oidview.com]
tfrapStatusLmiAutosense OBJECT-TYPE SYNTAX INTEGER { disabled (1), searching (2), learned-annex-d (3), learned-annex-a (4), learned-type1 (5) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the current status of LMI Auto Sensing if it's enabled. (1) Disabled: LMI is configured as Type 1, Annex-D, or Annex-A (2) Searching: unit is attempting to determine the LMI type of the attached equipment by issuing LMI messages of each LMI type and searching for responses. (3) Learned Annex-D: unit has successfully detected Annex-D LMI (ANSI T1.617 Annex D) (4) Learned Annex-A: unit has successfully detected Annex-A LMI (ITU/CCITT Q.933 Annex A) (5) Learned Type 1: unit has successfully detected Type 1 LMI (Cisco, Group of four, LMI)" ::= { tfrapStatus 12 }
tfrapStatusLmiAutosense OBJECT-TYPE SYNTAX INTEGER { disabled (1), searching (2), learned-annex-d (3), learned-annex-a (4), learned-type1 (5) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the current status of LMI Auto Sensing if it's enabled. (1) Disabled: LMI is configured as Type 1, Annex-D, or Annex-A (2) Searching: unit is attempting to determine the LMI type of the attached equipment by issuing LMI messages of each LMI type and searching for responses. (3) Learned Annex-D: unit has successfully detected Annex-D LMI (ANSI T1.617 Annex D) (4) Learned Annex-A: unit has successfully detected Annex-A LMI (ITU/CCITT Q.933 Annex A) (5) Learned Type 1: unit has successfully detected Type 1 LMI (Cisco, Group of four, LMI)" ::= { tfrapStatus 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.5.4.12.0 | tfrapStatusLmiAutosense | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.5.4.1 | tfrapStatusIntfTable | 9 | 18 | tfrapStatusIntftable |
| 1.3.6.1.4.1.485.5.4.2 | tfrapVnipTopologyTable | 1 | 23 | VNIP topology is a feature that, for each interface, maps all compatible VNIP peers, their DLCI value, ip address and relative lo… |
| 1.3.6.1.4.1.485.5.4.3 | tfrapStatusMgmtTable | 5 | 10 | None |
| 1.3.6.1.4.1.485.5.4.4 | tfrapStatusLedTable | 7 | 14 | None |
| 1.3.6.1.4.1.485.5.4.5 | tfrapVnipTransitDelayClear | 1 | 1 | Allows the user to clear all the VNIP Transit Delay data collected in the VNIP topology database. (1) Clear entire Transit Delay … |
| 1.3.6.1.4.1.485.5.4.6 | tfrapLmiSourcing | 1 | 1 | If configured for Frame Relay with a non-zero LMI inactivity timer the unit will monitor the status of LMI and, if proper messag… |
| 1.3.6.1.4.1.485.5.4.11 | tfrapVBertClear | 1 | 1 | Allows the user to clear all the VBERT data collected in the VNIP topology database as long as the entry is not in a test status.… |