Vendor: Sync Research, Inc.
Module: DFRAP-MIB
[Automatically extracted from oidview.com]
dfrapCfgFrTable OBJECT IDENTIFIER ::= { dfrapConfiguration 5 }
dfrapCfgFrTable OBJECT IDENTIFIER ::= { dfrapConfiguration 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.6.2.5.1 | dfrapCfgFrAddrLen | 1 | 1 | Shows the size that DLCI address field. This setting must correspond to the Frame Relay transmission format; typically Two bytes.… |
| 1.3.6.1.4.1.485.6.2.5.2 | dfrapCfgFrCrcMode | 1 | 1 | This defines the manner in which the unit handles HDLC protocol errors (crc errors) in a Frame Relay application. If Discard is s… |
| 1.3.6.1.4.1.485.6.2.5.3 | dfrapCfgFrLmiType | 1 | 1 | The LMI type used in a Frame Relay application. This setting must match the attached Frame Relay device configuration. Annex-A an… |
| 1.3.6.1.4.1.485.6.2.5.4 | dfrapCfgFrLmiInactivityTimeout | 1 | 1 | Timer used by the unit to determine that an attached device is not participating in the LMI protocol and that the unit should att… |
| 1.3.6.1.4.1.485.6.2.5.5 | dfrapCfgFrLmiKeepaliveTimeout | 1 | 1 | Timer used by the unit to determine the frequency at which Status Enquiries are issued during LMI sourcing states where the unit… |
| 1.3.6.1.4.1.485.6.2.5.6 | dfrapCfgFrAddrResMode | 1 | 1 | The ip-based Address Resolution protocol supported in the application. With ARP, requests are received and replies are generated … |
| 1.3.6.1.4.1.485.6.2.5.7 | dfrapCfgFrAddrResInarpTimer | 1 | 1 | If the unit is configured to support the InARP address resolution protocol, this is the frequency of INARP requests that the unit… |
| 1.3.6.1.4.1.485.6.2.5.8 | dfrapCfgFrLmiFullStatus | 1 | 1 | Timer used by the unit to determine if an LMI Full Status Report is missing. In the absence of a Full Status report for the durat… |
| 1.3.6.1.4.1.485.6.2.5.9 | dfrapCfgFrAddrResDlcis | 1 | 1 | Address Resolution Dlcis determines which dlcis will support address resolution. In Private management modes (Local, Remote, Bidi… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.6.2.1 | dfrapCfgMgmtTable | 5 | 67 | None |
| 1.3.6.1.4.1.485.6.2.2 | dfrapCfgAppTable | 6 | 12 | None |
| 1.3.6.1.4.1.485.6.2.3 | dfrapCfgDdsTable | 2 | 4 | None |
| 1.3.6.1.4.1.485.6.2.4 | dfrapCfgDteTable | 8 | 16 | None |
| 1.3.6.1.4.1.485.6.2.6 | dfrapCfgVnipTable | 8 | 23 | None |
| 1.3.6.1.4.1.485.6.2.7 | dfrapCfgFrPerf | 13 | 41 | None |
| 1.3.6.1.4.1.485.6.2.8 | dfrapCfgSecurityTable | 6 | 12 | None |
| 1.3.6.1.4.1.485.6.2.12 | dfrapCfgLock | 1 | 1 | Request to start configuration download and lock out any other means of configuring the unit. The integer passed in represents th… |
| 1.3.6.1.4.1.485.6.2.13 | dfrapCfgLockID | 1 | 1 | Returns the IP Address of the management station currently in control of configuration. A unit that is not in a configuration lo… |
| 1.3.6.1.4.1.485.6.2.14 | dfrapCfgID | 1 | 1 | A read of this object returns the Current Configuration ID string. A write sets the Configuration ID string. The string contains… |
| 1.3.6.1.4.1.485.6.2.15 | dfrapCfgStatus | 1 | 1 | The status of a configuration install is reported here. On startup, a status of success will be reported. (1) The configuration h… |
| 1.3.6.1.4.1.485.6.2.16 | dfrapCfgUnlock | 1 | 1 | The management station sets this variable to complete the configuration install process. Un-lock (1) notifies the agent to remove… |
| 1.3.6.1.4.1.485.6.2.17 | dfrapCfgUpdate | 1 | 1 | The management station sets this variable to complete the configuration install process. Update (1) notifies the agent to start t… |