Vendor: Sync Research, Inc.
Module: MFRAP-MIB
[Automatically extracted from oidview.com]
mfrapStatusDteTable OBJECT IDENTIFIER ::= { mfrapStatus 7 }
mfrapStatusDteTable OBJECT IDENTIFIER ::= { mfrapStatus 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.8.4.7.1 | mfrapStatusDteMode | 1 | 1 | Status of allocation of T1 bandwidth to the DTE port data. (1) no connections - indicates the DTE port has no connections to the … |
| 1.3.6.1.4.1.485.8.4.7.2 | mfrapStatusDteRts | 1 | 1 | Status of the Request to Send (RTS) signal from the DTE port. (1) RTS Active (2) RTS Inactive |
| 1.3.6.1.4.1.485.8.4.7.3 | mfrapStatusDteDtr | 1 | 1 | Status of the Data Terminal Ready (DTR) signal from the DTE port. (1) DTR Active (2) DTR Inactive |
| 1.3.6.1.4.1.485.8.4.7.4 | mfrapStatusDteDcd | 1 | 1 | Status of the Data Carrier Detect (DCD) signal driven by this unit towards the DTE port (1) DCD Active (2) DCD Inactive |
| 1.3.6.1.4.1.485.8.4.7.5 | mfrapStatusDteDsr | 1 | 1 | Status of the Data Set Ready (DSR) signal driven by this unit towards the DTE port. (1) DSR Active (2) DSR Inactive |
| 1.3.6.1.4.1.485.8.4.7.6 | mfrapStatusDteCts | 1 | 1 | Status of the Clear to Send (CTS) signal driven by this unit towards the DTE port (1) CTS Active (2) CTS Inactive |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.8.4.1 | mfrapStatusT1Table | 3 | 6 | None |
| 1.3.6.1.4.1.485.8.4.2 | mfrapVnipTopologyTable | 1 | 23 | VNIP topology is a feature that, for each interface, maps all compatible VNIP peers, their DLCI value, ip address and relative lo… |
| 1.3.6.1.4.1.485.8.4.3 | mfrapStatusMgmtTable | 5 | 10 | None |
| 1.3.6.1.4.1.485.8.4.4 | mfrapStatusLedTable | 9 | 18 | None |
| 1.3.6.1.4.1.485.8.4.5 | mfrapVnipTransitDelayClear | 1 | 1 | Allows the user to clear all the VNIP Transit Delay data collected in the VNIP topology database. (1) Clear entire Transit Delay … |
| 1.3.6.1.4.1.485.8.4.6 | mfrapLmiSourcing | 1 | 1 | If configured for Frame Relay with a non-zero LMI inactivity timer the unit will monitor the status of LMI and, if proper messag… |
| 1.3.6.1.4.1.485.8.4.12 | mfrapStatusLmiAutosense | 1 | 1 | This indicates the current status of LMI Auto Sensing if it's enabled. (1) Disabled: LMI is configured as Type 1, Annex-D, or Ann… |
| 1.3.6.1.4.1.485.8.4.14 | mfrapStatusNestTable | 4 | 8 | None |
| 1.3.6.1.4.1.485.8.4.15 | mfrapStatusDandiTable | 3 | 6 | None |