Normally the same value as frDlcmiIfIndex, but
different when an implementation associates a virtual
ifEntry with a DLC or set of DLCs in order to associate
higher layer objects such as the ipAddrEntry with a
subset of the virtual circuits on a Frame Relay
interface. The type of such ifEntries is defined by the
higher layer object; for example, if PPP/Frame Relay is
implemented, the ifType of this ifEntry would be PPP.
If it is not so defined, as would be the case with an
ipAddrEntry, it should be of type Other.
Parsed from file usDataFr.mi2.txt
Company: None
Module: Unisphere-Data-FRAME-RELAY-MIB
Normally the same value as frDlcmiIfIndex, but different when an
implementation associates a virtual ifEntry with a DLC or set of DLCs in
order to associate higher layer objects such as the ipAddrEntry with a
subset of the virtual circuits on a Frame Relay interface. The type of
such ifEntries is defined by the higher layer object; for example, if
PPP/Frame Relay is implemented, the ifType of this ifEntry would be PPP.
If it is not so defined, as would be the case with an ipAddrEntry, it
should be of type Other.
Parsed from file Juniper-FRAME-RELAY-MIB.mib
Module: Juniper-FRAME-RELAY-MIB
Vendor: Juniper Networks/Unisphere
Module: Juniper-FRAME-RELAY-MIB
[Automatically extracted from oidview.com]
usdFrCircuitLogicalIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "Normally the same value as frDlcmiIfIndex, but different when an implementation associates a virtual ifEntry with a DLC or set of DLCs in order to associate higher layer objects such as the ipAddrEntry with a subset of the virtual circuits on a Frame Relay interface. The type of such ifEntries is defined by the higher layer object; for example, if PPP/Frame Relay is implemented, the ifType of this ifEntry would be PPP. If it is not so defined, as would be the case with an ipAddrEntry, it should be of type Other." ::= { usdFrCircuitEntry 20 }
juniFrCircuitLogicalIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "Normally the same value as frDlcmiIfIndex, but different when an implementation associates a virtual ifEntry with a DLC or set of DLCs in order to associate higher layer objects such as the ipAddrEntry with a subset of the virtual circuits on a Frame Relay interface. The type of such ifEntries is defined by the higher layer object; for example, if PPP/Frame Relay is implemented, the ifType of this ifEntry would be PPP. If it is not so defined, as would be the case with an ipAddrEntry, it should be of type Other." ::= { juniFrCircuitEntry 20 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.1 | juniFrCircuitIfIndex, usdFrCircuitIfIndex | 0 | 0 | The ifIndex Value of the ifEntry this virtual circuit is layered onto. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.2 | juniFrCircuitDlci, usdFrCircuitDlci | 0 | 0 | The Data Link Connection Identifier for this virtual circuit. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.3 | juniFrCircuitState, usdFrCircuitState | 0 | 0 | Indicates whether the particular virtual circuit is operational. In the absence of a Data Link Connection Management Interface,… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.4 | juniFrCircuitReceivedFECNs, usdFrCircuitReceivedFECNs | 0 | 0 | Number of frames received from the network indicating forward congestion since the virtual circuit was created. This occurs whe… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.5 | juniFrCircuitReceivedBECNs, usdFrCircuitReceivedBECNs | 0 | 0 | Number of frames received from the network indicating backward congestion since the virtual circuit was created. This occurs wh… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.6 | juniFrCircuitSentFrames, usdFrCircuitSentFrames | 0 | 0 | The number of frames sent from this virtual circuit since it was created. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.7 | juniFrCircuitSentOctets, usdFrCircuitSentOctets | 0 | 0 | The number of octets sent from this virtual circuit since it was created. Octets counted are the full frame relay header and th… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.8 | juniFrCircuitReceivedFrames, usdFrCircuitReceivedFrames | 0 | 0 | Number of frames received over this virtual circuit since it was created. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.9 | juniFrCircuitReceivedOctets, usdFrCircuitReceivedOctets | 0 | 0 | Number of octets received over this virtual circuit since it was created. Octets counted include the full frame relay header, b… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.10 | juniFrCircuitCreationTime, usdFrCircuitCreationTime | 0 | 0 | The value of sysUpTime when the virtual circuit was created, whether by the Data Link Connection Management Interface or by a Se… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.11 | juniFrCircuitLastTimeChange, usdFrCircuitLastTimeChange | 0 | 0 | The value of sysUpTime when last there was a change in the virtual circuit state |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.12 | juniFrCircuitCommittedBurst, usdFrCircuitCommittedBurst | 0 | 0 | This variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during … |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.13 | juniFrCircuitExcessBurst, usdFrCircuitExcessBurst | 0 | 0 | This variable indicates the maximum amount of uncommitted data bits that the network will attempt to deliver over the measuremen… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.14 | juniFrCircuitThroughput, usdFrCircuitThroughput | 0 | 0 | Throughput is the average number of 'Frame Relay Information Field' bits transferred per second across a user network interface i… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.15 | juniFrCircuitMulticast, usdFrCircuitMulticast | 0 | 0 | This indicates whether this VC is used as a unicast VC (i.e. not multicast) or the type of multicast service subscribed to. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.16 | juniFrCircuitType, usdFrCircuitType | 0 | 0 | Indication of whether the VC was manually created (static), or dynamically created (dynamic) via the data link control management… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.17 | juniFrCircuitDiscards, usdFrCircuitDiscards | 0 | 0 | The number of inbound frames dropped because of format errors, or because the VC is inactive. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.18 | juniFrCircuitReceivedDEs, usdFrCircuitReceivedDEs | 0 | 0 | Number of frames received from the network indicating that they were eligible for discard since the virtual circuit was created.… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.19 | juniFrCircuitSentDEs, usdFrCircuitSentDEs | 0 | 0 | Number of frames sent to the network indicating that they were eligible for discard since the virtual circuit was created. This… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.21 | juniFrCircuitRowStatus, usdFrCircuitRowStatus | 0 | 0 | This object is used to create a new row or modify or destroy an existing row in the manner described in the definition of the Ro… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.22 | juniFrCircuitSentFECNs, usdFrCircuitSentFECNs | 0 | 0 | Number of frames sent to the network indicating forward congestion since the virtual circuit was created. This occurs when the … |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.23 | juniFrCircuitSentBECNs, usdFrCircuitSentBECNs | 0 | 0 | Number of frames sent to the network indicating backward congestion since the virtual circuit was created. This occurs when the… |