Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create/delete an entry in this table, the following entry objects
MUST be explicitly configured:
juniIpRouteMapClauseElementValue
juniIpRouteMapClauseRowStatus
Additional object juniIpRouteMapClauseElemIdAddon may become OPTIONAL
for some elements creation/deletion along with the above. Refer the
mapping table below to determine which elements are required.
The table entry elements may not be modified. Only create and delete
are allowed.
Note#1: Make sure route map(s) are created before configuring their
corresponding clause elements.
Note#2: The mapping table below is the extensive guide for the options,
values and ranges of the table objects
juniIpRouteMapClauseElemId, juniIpRouteMapClauseElemIdAddon and
juniIpRouteMapClauseElementValue.
Clause element configuration selection mapping table
====================================================
ClauseElemId ClauseElemIdAddon ClauseElementValue
============ ================= ==================
matchAsPath notApplicable DisplayString (SIZE(1..32))
matchCommunity exact/ DisplayString (SIZE(1..32))
notApplicable
matchExtendedCommunity exact/ DisplayString (SIZE(1..32))
notApplicable
Note#3: At a given time only one can be configured for access list and
prefix-list/trees'.
matchAccessList notApplicable DisplayString (SIZE(1..32))
matchPrefixList notApplicable DisplayString (SIZE(1..32))
matchPrefixTree notApplicable DisplayString (SIZE(1..32))
matchNextHop notApplicable DisplayString (SIZE(1..32))
matchNextHopPreList notApplicable DisplayString (SIZE(1..32))
matchNextHopPreTree notApplicable DisplayString (SIZE(1..32))
Note#4: For matchLevel, matchMetricType and matchRouteType element
selection choose the exact case-sensitive string to set the
option.
Example: For matchLevel, option levelOne, levelOneAndTwo, etc.
can be set.
matchLevel notApplicable { levelOne,
levelOneAndTwo,
levelTwo,
backbone,
stubArea }
matchMetricType notApplicable { internal or typeOne,
external or typeTwo }
matchRouteType notApplicable { external,
internal,
internalInter,
internalIntra }
matchDistance notApplicable Integer32 (0..255)
matchMetric notApplicable Unsigned32
matchTag notApplicable Unsigned32
matchPolicyList notApplicable DisplayString (SIZE(1..32))
setAsPath notApplicable DisplayString (SIZE(1..32))
setCommunityAdd notApplicable DisplayString (SIZE(1..32))
setCommList delete/ DisplayString (SIZE(1..32))
notApplicable
setCommunity notApplicable DisplayString (SIZE(1..32))
Note#5: For below elements selection choose the exact case-sensitive
string to set the option.
Example: For setOrigin, egp or igp or incomplete will be the
valid options to select.
setAutoTag notApplicable { autoTag }
setCommunityNone notApplicable { communityNone }
Note#6: setCommunityCreateList and setCommunityCreateListAdd will have
only one instance and all will be set in one instance of the
element (either setCommunityCreateList or
setCommunityCreateListAdd), i.e., all options and values will
aggregate in one SubElementId.
setCommunityCreateList notApplicable Unsigned32
setCommunityCreateListAdd notApplicable Unsigned32
setCommunityCreateList notApplicable { none,
localAs,
noAdvertise,
noExport }
setCommunityCreateListAdd notApplicable { none,
localAs,
noAdvertise,
noExport }
setLevel notApplicable { backbone,
levelOne,
levelOneAndTwo,
levelTwo,
stubArea }
setRouteType notApplicable { external,
internal,
internalInter,
internalIntra }
setNextHopPeerAddr notApplicable { peerAddress }
setMetricType notApplicable { external,
internal }
setOrigin notApplicable { egp,
igp,
incomplete }
setAsPathCreateList notApplicable Interger32 (1..65535)
setTag notApplicable Unsigned32
setWeight notApplicable Unsigned32
setDistance notApplicable Interger32 (1..255)
setLocalPref notApplicable Unsigned32
setMetric relativeNeg/ Unsigned32
relativePos/
notApplicable
Note#7: setExtendedCommunityCreate and setExtendedCommunityCreateAdd
will have only one instance and all will be set in one instance
of the element (either setExtendedCommunityCreate or
setExtendedCommunityCreateAdd) i.e. all options and values will
aggregate in one SubElementId.
setExtendedCommunityCreate extCommRt/ IPADDRESS:Unsigned32 or
notApplicable IPADDRESS-in-ASN:Unsigned32
setExtendedCommunityCreate extCommSoo/ IPADDRESS:Unsigned32 or
notApplicable IPADDRESS-in-ASN:Unsigned32
setExtendedCommunityCreateAdd extCommRt/ IPADDRESS:Unsigned32 or
notApplicable IPADDRESS-in-ASN:Unsigned32
setExtendedCommunityCreateAdd extCommSoo/ IPADDRESS:Unsigned32
notApplicable IPADDRESS-in-ASN:Unsigned32
Note#8: Damping element has only one instance at any given time. It can
be deleted by just refering to the instance (elementID and
subElementId) without refering the exact value; i.e., while
deleting, values doesn't matter.
setDampingCreate notApplicable
1. HalfLifeiTime-Interger32 (1..45)
2. RtSuppressTime-Interger32 (1..20000)
3. SuppressedRtReuseTime-Interger32 (1..20000)
4. MaxRtSuppressTime-Interger32 (1..255)
5. UnreachableRtHalfLifeTime-Interger32 (1..45)
Note#9: 1, 2, 3 and 4 values are MUST values to be specified (in
minutes) for route flap damping and 5th one is optional. Format
for specifying the values are very rigid and strict. Always
specify four MUST values. The first value shouldn't be preceded
with space characters and last the value always should be
followed with one space character. From first value to till
last value, all the values will be separated from each other by
one space character.
setNextHop interfaceValue/ Unsigned32
notApplicable
setNextHop ipAddress/ IPADDRESS
notApplicable
Parsed from file juniIpPolicy.mi2.txt
Company: None
Module: Juniper-IP-POLICY-MIB
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create/delete an entry in this table, the following entry objects
MUST be explicitly configured:
juniIpRouteMapClauseElementValue
juniIpRouteMapClauseRowStatus
Additional object juniIpRouteMapClauseElemIdAddon may become OPTIONAL
for some elements creation/deletion along with the above. Refer the
mapping table below to determine which elements are required.
The table entry elements may not be modified. Only create and delete
are allowed.
Note#1: Make sure route map(s) are created before configuring their
corresponding clause elements.
Note#2: The mapping table below is the extensive guide for the options,
values and ranges of the table objects
juniIpRouteMapClauseElemId, juniIpRouteMapClauseElemIdAddon and
juniIpRouteMapClauseElementValue.
Clause element configuration selection mapping table
====================================================
ClauseElemId ClauseElemIdAddon ClauseElementValue
============ ================= ==================
matchAsPath notApplicable DisplayString (SIZE(1..32))
matchCommunity exact/ DisplayString (SIZE(1..32))
notApplicable
matchExtendedCommunity exact/ DisplayString (SIZE(1..32))
notApplicable
Note#3: At a given time only one can be configured for access list and
prefix-list/trees'.
matchAccessList notApplicable DisplayString (SIZE(1..32))
matchPrefixList notApplicable DisplayString (SIZE(1..32))
matchPrefixTree notApplicable DisplayString (SIZE(1..32))
matchNextHop notApplicable DisplayString (SIZE(1..32))
matchNextHopPreList notApplicable DisplayString (SIZE(1..32))
matchNextHopPreTree notApplicable DisplayString (SIZE(1..32))
Note#4: For matchLevel, matchMetricType and matchRouteType element
selection choose the exact case-sensitive string to set the
option.
Example: For matchLevel, option levelOne, levelOneAndTwo, etc.
can be set.
matchLevel notApplicable { levelOne,
levelOneAndTwo,
levelTwo,
backbone,
stubArea }
matchMetricType notApplicable { internal or typeOne,
external or typeTwo }
matchRouteType notApplicable { external,
internal,
internalInter,
internalIntra }
matchDistance notApplicable Integer32 (0..255)
matchMetric notApplicable Unsigned32
matchTag notApplicable Unsigned32
matchPolicyList notApplicable DisplayString (SIZE(1..32))
setAsPath notApplicable DisplayString (SIZE(1..32))
setCommunityAdd notApplicable DisplayString (SIZE(1..32))
setCommList delete/ DisplayString (SIZE(1..32))
notApplicable
setCommunity notApplicable DisplayString (SIZE(1..32))
Note#5: For below elements selection choose the exact case-sensitive
string to set the option.
Example: For setOrigin, egp or igp or incomplete will be the
valid options to select.
setAutoTag notApplicable { autoTag }
setCommunityNone notApplicable { communityNone }
Note#6: setCommunityCreateList and setCommunityCreateListAdd will have
only one instance and all will be set in one instance of the
element (either setCommunityCreateList or
setCommunityCreateListAdd), i.e., all options and values will
aggregate in one SubElementId.
setCommunityCreateList notApplicable Unsigned32
setCommunityCreateListAdd notApplicable Unsigned32
setCommunityCreateList notApplicable { none,
localAs,
noAdvertise,
noExport }
setCommunityCreateListAdd notApplicable { none,
localAs,
noAdvertise,
noExport }
setLevel notApplicable { backbone,
levelOne,
levelOneAndTwo,
levelTwo,
stubArea }
setRouteType notApplicable { external,
internal,
internalInter,
internalIntra }
setNextHopPeerAddr notApplicable { peerAddress }
setMetricType notApplicable { external,
internal }
setOrigin notApplicable { egp,
igp,
incomplete }
setAsPathCreateList notApplicable Interger32 (1..65535)
setTag notApplicable Unsigned32
setWeight notApplicable Unsigned32
setDistance notApplicable Interger32 (1..255)
setLocalPref notApplicable Unsigned32
setMetric relativeNeg/ Unsigned32
relativePos/
notApplicable
Note#7: setExtendedCommunityCreate and setExtendedCommunityCreateAdd
will have only one instance and all will be set in one instance
of the element (either setExtendedCommunityCreate or
setExtendedCommunityCreateAdd) i.e. all options and values will
aggregate in one SubElementId.
setExtendedCommunityCreate extCommRt/ IPADDRESS:Unsigned32 or
notApplicable IPADDRESS-in-ASN:Unsigned32
setExtendedCommunityCreate extCommSoo/ IPADDRESS:Unsigned32 or
notApplicable IPADDRESS-in-ASN:Unsigned32
setExtendedCommunityCreateAdd extCommRt/ IPADDRESS:Unsigned32 or
notApplicable IPADDRESS-in-ASN:Unsigned32
setExtendedCommunityCreateAdd extCommSoo/ IPADDRESS:Unsigned32
notApplicable IPADDRESS-in-ASN:Unsigned32
Note#8: Damping element has only one instance at any given time. It can
be deleted by just refering to the instance (elementID and
subElementId) without refering the exact value; i.e., while
deleting, values doesn't matter.
setDampingCreate notApplicable
1. HalfLifeiTime-Interger32 (1..45)
2. RtSuppressTime-Interger32 (1..20000)
3. SuppressedRtReuseTime-Interger32 (1..20000)
4. MaxRtSuppressTime-Interger32 (1..255)
5. UnreachableRtHalfLifeTime-Interger32 (1..45)
Note#9: 1, 2, 3 and 4 values are MUST values to be specified (in
minutes) for route flap damping and 5th one is optional. Format
for specifying the values are very rigid and strict. Always
specify four MUST values. The first value shouldn't be preceded
with space characters and last the value always should be
followed with one space character. From first value to till
last value, all the values will be separated from each other by
one space character.
setNextHop interfaceValue/ Unsigned32
notApplicable
setNextHop ipAddress/ IPADDRESS
notApplicable
Parsed from file Juniper-IP-POLICY-MIB.mib
Module: Juniper-IP-POLICY-MIB
Vendor: Juniper Networks/Unisphere
Module: Juniper-IP-POLICY-MIB
[Automatically extracted from oidview.com]
juniIpRouteMapClauseRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create/delete an entry in this table, the following entry objects MUST be explicitly configured: juniIpRouteMapClauseElementValue juniIpRouteMapClauseRowStatus Additional object juniIpRouteMapClauseElemIdAddon may become OPTIONAL for some elements creation/deletion along with the above. Refer the mapping table below to determine which elements are required. The table entry elements may not be modified. Only create and delete are allowed. Note#1: Make sure route map(s) are created before configuring their corresponding clause elements. Note#2: The mapping table below is the extensive guide for the options, values and ranges of the table objects juniIpRouteMapClauseElemId, juniIpRouteMapClauseElemIdAddon and juniIpRouteMapClauseElementValue. Clause element configuration selection mapping table ==================================================== ClauseElemId ClauseElemIdAddon ClauseElementValue ============ ================= ================== matchAsPath notApplicable DisplayString (SIZE(1..32)) matchCommunity exact/ DisplayString (SIZE(1..32)) notApplicable matchExtendedCommunity exact/ DisplayString (SIZE(1..32)) notApplicable Note#3: At a given time only one can be configured for access list and prefix-list/trees'. matchAccessList notApplicable DisplayString (SIZE(1..32)) matchPrefixList notApplicable DisplayString (SIZE(1..32)) matchPrefixTree notApplicable DisplayString (SIZE(1..32)) matchNextHop notApplicable DisplayString (SIZE(1..32)) matchNextHopPreList notApplicable DisplayString (SIZE(1..32)) matchNextHopPreTree notApplicable DisplayString (SIZE(1..32)) Note#4: For matchLevel, matchMetricType and matchRouteType element selection choose the exact case-sensitive string to set the option. Example: For matchLevel, option levelOne, levelOneAndTwo, etc. can be set. matchLevel notApplicable { levelOne, levelOneAndTwo, levelTwo, backbone, stubArea } matchMetricType notApplicable { internal or typeOne, external or typeTwo } matchRouteType notApplicable { external, internal, internalInter, internalIntra } matchDistance notApplicable Integer32 (0..255) matchMetric notApplicable Unsigned32 matchTag notApplicable Unsigned32 matchPolicyList notApplicable DisplayString (SIZE(1..32)) setAsPath notApplicable DisplayString (SIZE(1..32)) setCommunityAdd notApplicable DisplayString (SIZE(1..32)) setCommList delete/ DisplayString (SIZE(1..32)) notApplicable setCommunity notApplicable DisplayString (SIZE(1..32)) Note#5: For below elements selection choose the exact case-sensitive string to set the option. Example: For setOrigin, egp or igp or incomplete will be the valid options to select. setAutoTag notApplicable { autoTag } setCommunityNone notApplicable { communityNone } Note#6: setCommunityCreateList and setCommunityCreateListAdd will have only one instance and all will be set in one instance of the element (either setCommunityCreateList or setCommunityCreateListAdd), i.e., all options and values will aggregate in one SubElementId. setCommunityCreateList notApplicable Unsigned32 setCommunityCreateListAdd notApplicable Unsigned32 setCommunityCreateList notApplicable { none, localAs, noAdvertise, noExport } setCommunityCreateListAdd notApplicable { none, localAs, noAdvertise, noExport } setLevel notApplicable { backbone, levelOne, levelOneAndTwo, levelTwo, stubArea } setRouteType notApplicable { external, internal, internalInter, internalIntra } setNextHopPeerAddr notApplicable { peerAddress } setMetricType notApplicable { external, internal } setOrigin notApplicable { egp, igp, incomplete } setAsPathCreateList notApplicable Interger32 (1..65535) setTag notApplicable Unsigned32 setWeight notApplicable Unsigned32 setDistance notApplicable Interger32 (1..255) setLocalPref notApplicable Unsigned32 setMetric relativeNeg/ Unsigned32 relativePos/ notApplicable Note#7: setExtendedCommunityCreate and setExtendedCommunityCreateAdd will have only one instance and all will be set in one instance of the element (either setExtendedCommunityCreate or setExtendedCommunityCreateAdd) i.e. all options and values will aggregate in one SubElementId. setExtendedCommunityCreate extCommRt/ IPADDRESS:Unsigned32 or notApplicable IPADDRESS-in-ASN:Unsigned32 setExtendedCommunityCreate extCommSoo/ IPADDRESS:Unsigned32 or notApplicable IPADDRESS-in-ASN:Unsigned32 setExtendedCommunityCreateAdd extCommRt/ IPADDRESS:Unsigned32 or notApplicable IPADDRESS-in-ASN:Unsigned32 setExtendedCommunityCreateAdd extCommSoo/ IPADDRESS:Unsigned32 notApplicable IPADDRESS-in-ASN:Unsigned32 Note#8: Damping element has only one instance at any given time. It can be deleted by just refering to the instance (elementID and subElementId) without refering the exact value; i.e., while deleting, values doesn't matter. setDampingCreate notApplicable 1. HalfLifeiTime-Interger32 (1..45) 2. RtSuppressTime-Interger32 (1..20000) 3. SuppressedRtReuseTime-Interger32 (1..20000) 4. MaxRtSuppressTime-Interger32 (1..255) 5. UnreachableRtHalfLifeTime-Interger32 (1..45) Note#9: 1, 2, 3 and 4 values are MUST values to be specified (in minutes) for route flap damping and 5th one is optional. Format for specifying the values are very rigid and strict. Always specify four MUST values. The first value shouldn't be preceded with space characters and last the value always should be followed with one space character. From first value to till last value, all the values will be separated from each other by one space character. setNextHop interfaceValue/ Unsigned32 notApplicable setNextHop ipAddress/ IPADDRESS notApplicable " ::= { juniIpRouteMapClauseEntry 5 }
juniIpRouteMapClauseRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create/delete an entry in this table, the following entry objects MUST be explicitly configured: juniIpRouteMapClauseElementValue juniIpRouteMapClauseRowStatus Additional object juniIpRouteMapClauseElemIdAddon may become OPTIONAL for some elements creation/deletion along with the above. Refer the mapping table below to determine which elements are required. The table entry elements may not be modified. Only create and delete are allowed. Note#1: Make sure route map(s) are created before configuring their corresponding clause elements. Note#2: The mapping table below is the extensive guide for the options, values and ranges of the table objects juniIpRouteMapClauseElemId, juniIpRouteMapClauseElemIdAddon and juniIpRouteMapClauseElementValue. Clause element configuration selection mapping table ==================================================== ClauseElemId ClauseElemIdAddon ClauseElementValue ============ ================= ================== matchAsPath notApplicable DisplayString (SIZE(1..32)) matchCommunity exact/ DisplayString (SIZE(1..32)) notApplicable matchExtendedCommunity exact/ DisplayString (SIZE(1..32)) notApplicable Note#3: At a given time only one can be configured for access list and prefix-list/trees'. matchAccessList notApplicable DisplayString (SIZE(1..32)) matchPrefixList notApplicable DisplayString (SIZE(1..32)) matchPrefixTree notApplicable DisplayString (SIZE(1..32)) matchNextHop notApplicable DisplayString (SIZE(1..32)) matchNextHopPreList notApplicable DisplayString (SIZE(1..32)) matchNextHopPreTree notApplicable DisplayString (SIZE(1..32)) Note#4: For matchLevel, matchMetricType and matchRouteType element selection choose the exact case-sensitive string to set the option. Example: For matchLevel, option levelOne, levelOneAndTwo, etc. can be set. matchLevel notApplicable { levelOne, levelOneAndTwo, levelTwo, backbone, stubArea } matchMetricType notApplicable { internal or typeOne, external or typeTwo } matchRouteType notApplicable { external, internal, internalInter, internalIntra } matchDistance notApplicable Integer32 (0..255) matchMetric notApplicable Unsigned32 matchTag notApplicable Unsigned32 matchPolicyList notApplicable DisplayString (SIZE(1..32)) setAsPath notApplicable DisplayString (SIZE(1..32)) setCommunityAdd notApplicable DisplayString (SIZE(1..32)) setCommList delete/ DisplayString (SIZE(1..32)) notApplicable setCommunity notApplicable DisplayString (SIZE(1..32)) Note#5: For below elements selection choose the exact case-sensitive string to set the option. Example: For setOrigin, egp or igp or incomplete will be the valid options to select. setAutoTag notApplicable { autoTag } setCommunityNone notApplicable { communityNone } Note#6: setCommunityCreateList and setCommunityCreateListAdd will have only one instance and all will be set in one instance of the element (either setCommunityCreateList or setCommunityCreateListAdd), i.e., all options and values will aggregate in one SubElementId. setCommunityCreateList notApplicable Unsigned32 setCommunityCreateListAdd notApplicable Unsigned32 setCommunityCreateList notApplicable { none, localAs, noAdvertise, noExport } setCommunityCreateListAdd notApplicable { none, localAs, noAdvertise, noExport } setLevel notApplicable { backbone, levelOne, levelOneAndTwo, levelTwo, stubArea } setRouteType notApplicable { external, internal, internalInter, internalIntra } setNextHopPeerAddr notApplicable { peerAddress } setMetricType notApplicable { external, internal } setOrigin notApplicable { egp, igp, incomplete } setAsPathCreateList notApplicable Interger32 (1..65535) setTag notApplicable Unsigned32 setWeight notApplicable Unsigned32 setDistance notApplicable Interger32 (1..255) setLocalPref notApplicable Unsigned32 setMetric relativeNeg/ Unsigned32 relativePos/ notApplicable Note#7: setExtendedCommunityCreate and setExtendedCommunityCreateAdd will have only one instance and all will be set in one instance of the element (either setExtendedCommunityCreate or setExtendedCommunityCreateAdd) i.e. all options and values will aggregate in one SubElementId. setExtendedCommunityCreate extCommRt/ IPADDRESS:Unsigned32 or notApplicable IPADDRESS-in-ASN:Unsigned32 setExtendedCommunityCreate extCommSoo/ IPADDRESS:Unsigned32 or notApplicable IPADDRESS-in-ASN:Unsigned32 setExtendedCommunityCreateAdd extCommRt/ IPADDRESS:Unsigned32 or notApplicable IPADDRESS-in-ASN:Unsigned32 setExtendedCommunityCreateAdd extCommSoo/ IPADDRESS:Unsigned32 notApplicable IPADDRESS-in-ASN:Unsigned32 Note#8: Damping element has only one instance at any given time. It can be deleted by just refering to the instance (elementID and subElementId) without refering the exact value; i.e., while deleting, values doesn't matter. setDampingCreate notApplicable 1. HalfLifeiTime-Interger32 (1..45) 2. RtSuppressTime-Interger32 (1..20000) 3. SuppressedRtReuseTime-Interger32 (1..20000) 4. MaxRtSuppressTime-Interger32 (1..255) 5. UnreachableRtHalfLifeTime-Interger32 (1..45) Note#9: 1, 2, 3 and 4 values are MUST values to be specified (in minutes) for route flap damping and 5th one is optional. Format for specifying the values are very rigid and strict. Always specify four MUST values. The first value shouldn't be preceded with space characters and last the value always should be followed with one space character. From first value to till last value, all the values will be separated from each other by one space character. setNextHop interfaceValue/ Unsigned32 notApplicable setNextHop ipAddress/ IPADDRESS notApplicable " ::= { juniIpRouteMapClauseEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.13.1.8.3.1.1 | juniIpRouteMapClauseElemId | 0 | 0 | The clause element selection option. Select the appropriate element option to configure each element instance of match, match-s… |
| 1.3.6.1.4.1.4874.2.2.13.1.8.3.1.2 | juniIpRouteMapClauseSubElemId | 0 | 0 | The clause element sub ID used to distinguish specific instance of the element. This value is determined by choosing the next a… |
| 1.3.6.1.4.1.4874.2.2.13.1.8.3.1.3 | juniIpRouteMapClauseElemIdAddon | 0 | 0 | This represents clause element instance add-on option selected along with the main option (juniIpRouteMapClauseElemId) whenever … |
| 1.3.6.1.4.1.4874.2.2.13.1.8.3.1.4 | juniIpRouteMapClauseElementValue | 0 | 0 | This represents set, match-set and match clauses' different element instance values in character string form. Whatever may be t… |