Vendor: Juniper Networks/Unisphere
Module: Juniper-RADIUS-CLIENT-MIB
[Automatically extracted from oidview.com]
juniRadiusGeneralClient OBJECT IDENTIFIER ::= { juniRadiusClientObjects 1 }
juniRadiusGeneralClient OBJECT IDENTIFIER ::= { juniRadiusClientObjects 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.4874.2.2.19.1.1.1 | juniRadiusClientIdentifier, usdRadiusClientIdentifier | 1 | 1 | The NAS-Identifier of the RADIUS client. |
1.3.6.1.4.1.4874.2.2.19.1.1.2 | juniRadiusClientAlgorithm, usdRadiusClientAlgorithm | 1 | 1 | The algorithm used by the client when multiple authentication/accounting servers are configured: direct Use servers in order… |
1.3.6.1.4.1.4874.2.2.19.1.1.3 | juniRadiusClientSourceAddress, usdRadiusClientSourceAddress | 1 | 1 | The source address used by the RADIUS client in requests to the RADIUS server. The RADIUS server returns responses from this ad… |
1.3.6.1.4.1.4874.2.2.19.1.1.4 | juniRadiusClientUdpChecksum, usdRadiusClientUdpChecksum | 1 | 1 | Enables/disables the checksum calculations on RADIUS UDP packets. |
1.3.6.1.4.1.4874.2.2.19.1.1.5 | juniRadiusClientNasIdentifier, usdRadiusClientNasIdentifier | 1 | 1 | The identifier used by the client for the value of NAS-Identifier attribute (number 32) in access and accounting requests. The … |
1.3.6.1.4.1.4874.2.2.19.1.1.6 | juniRadiusClientDslPortType, usdRadiusClientDslPortType | 1 | 1 | The value to use in the NAS-Port-Type RADIUS Attribute (attribute number 61) for DSL interfaces in the RADIUS access and account… |
1.3.6.1.4.1.4874.2.2.19.1.1.7 | juniRadiusClientTunnelAccounting, usdRadiusClientTunnelAccounting | 1 | 1 | Enables/disables the tunnel accounting feature, which causes the system to send tunnel and session accounting requests. |
1.3.6.1.4.1.4874.2.2.19.1.1.8 | juniRadiusClientAcctSessionIdFormat, usdRadiusClientAcctSessionIdFormat | 1 | 1 | The format used by the client for the Acct-Session-ID attribute (attribute number 44): decimal Use an ASCII decimal value on… |
1.3.6.1.4.1.4874.2.2.19.1.1.9 | juniRadiusClientNasPortFormat, usdRadiusClientNasPortFormat | 1 | 1 | The format used by the client for the NAS-Port attribute (attribute number 5): xssssppp In the NAS-Port attribute (attribute 5… |
1.3.6.1.4.1.4874.2.2.19.1.1.10 | juniRadiusClientCallingStationDelimiter, usdRadiusClientCallingStationDelimiter | 1 | 1 | The character use as for delimiting fields in the Calling-Station-ID attribute (attribute 31, from RFC 2865) sent by the client.… |
1.3.6.1.4.1.4874.2.2.19.1.1.11 | juniRadiusClientEthernetPortType, usdRadiusClientEthernetPortType | 1 | 1 | The value to use in the NAS-Port-Type RADIUS Attribute (attribute number 61) for Ethernet interfaces in the RADIUS access and ac… |
1.3.6.1.4.1.4874.2.2.19.1.1.12 | juniRadiusClientIncludeIpAddrInAcctStart, usdRadiusClientIncludeIpAddrInAcctStart | 1 | 1 | Enables/disables the inclusion of the Framed-IP-Address attribute in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.13 | juniRadiusClientIncludeAcctSessionIdInAccessReq, usdRadiusClientIncludeAcctSessionIdInAccessReq | 1 | 1 | Enables/disables the inclusion of the Acct-Session-ID attribute in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.14 | juniRadiusClientRollover, usdRadiusClientRollover | 1 | 1 | Enables/disables the rollover to next server on receipt of access-reject. |
1.3.6.1.4.1.4874.2.2.19.1.1.15 | juniRadiusClientCallingStationIdFormat, usdRadiusClientCallingStationIdFormat | 1 | 1 | The format used by the client for the Calling-Station-ID attribute (attribute number 31): delimited In the Calling-Station-ID a… |
1.3.6.1.4.1.4874.2.2.19.1.1.16 | juniRadiusClientNasIpAddrUse, usdRadiusClientNasIpAddrUse | 1 | 1 | The value used by the client for the NAS-IP-Addr attribute (attribute number 4): normal Use the ERX IP address valu… |
1.3.6.1.4.1.4874.2.2.19.1.1.17 | juniRadiusClientIncludeAcctTunnelConnectionInAccessReq, usdRadiusClientIncludeAcctTunnelConnectionInAccessReq | 1 | 1 | Enables/disables the inclusion of the Acct-Tunnel-Connection attribute in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.18 | juniRadiusClientIncludeCalledStationIdInAccessReq, usdRadiusClientIncludeCalledStationIdInAccessReq | 1 | 1 | Enables/disables the inclusion of the Called-Station-ID attribute in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.19 | juniRadiusClientIncludeCallingStationIdInAccessReq, usdRadiusClientIncludeCallingStationIdInAccessReq | 1 | 1 | Enables/disables the inclusion of the Calling-Station-ID attribute in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.20 | juniRadiusClientIncludeConnectInfoInAccessReq, usdRadiusClientIncludeConnectInfoInAccessReq | 1 | 1 | Enables/disables the inclusion of the Connect-Info attribute in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.21 | juniRadiusClientIncludeNasIdentifierInAccessReq, usdRadiusClientIncludeNasIdentifierInAccessReq | 1 | 1 | Enables/disables the inclusion of the NAS-Identifier attribute in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.22 | juniRadiusClientIncludeNasPortInAccessReq, usdRadiusClientIncludeNasPortInAccessReq | 1 | 1 | Enables/disables the inclusion of the NAS-Port attribute in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.23 | juniRadiusClientIncludeNasPortIdInAccessReq, usdRadiusClientIncludeNasPortIdInAccessReq | 1 | 1 | Enables/disables the inclusion of the NAS-Port-ID attribute in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.24 | juniRadiusClientIncludeNasPortTypeInAccessReq, usdRadiusClientIncludeNasPortTypeInAccessReq | 1 | 1 | Enables/disables the inclusion of the NAS-Port-Type attribute in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.25 | juniRadiusClientIncludePppoeDescriptionInAccessReq, usdRadiusClientIncludePppoeDescriptionInAccessReq | 1 | 1 | Enables/disables the inclusion of the PPPoE-Description (VSA) attribute in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.26 | juniRadiusClientIncludeTunnelClientAuthIdInAccessReq, usdRadiusClientIncludeTunnelClientAuthIdInAccessReq | 1 | 1 | Enables/disables the inclusion of the Tunnel-Client-Auth-Id attribute in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.27 | juniRadiusClientIncludeTunnelClientEndpointInAccessReq, usdRadiusClientIncludeTunnelClientEndpointInAccessReq | 1 | 1 | Enables/disables the inclusion of the Tunnel-Client-Endpoint attribute in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.28 | juniRadiusClientIncludeTunnelMediumTypeInAccessReq, usdRadiusClientIncludeTunnelMediumTypeInAccessReq | 1 | 1 | Enables/disables the inclusion of the Tunnel-Medium attribute in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.29 | juniRadiusClientIncludeTunnelServerAttributesInAccessReq, usdRadiusClientIncludeTunnelServerAttributesInAccessReq | 1 | 1 | Enables/disables the inclusion of the Tunnel-Server attributes (Tunnel attributes for a PPP session terminated on the LNS) in th… |
1.3.6.1.4.1.4874.2.2.19.1.1.30 | juniRadiusClientIncludeTunnelServerAuthIdInAccessReq, usdRadiusClientIncludeTunnelServerAuthIdInAccessReq | 1 | 1 | Enables/disables the inclusion of the Tunnel-Server-Auth-Id attribute in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.31 | juniRadiusClientIncludeTunnelServerEndpointInAccessReq, usdRadiusClientIncludeTunnelServerEndpointInAccessReq | 1 | 1 | Enables/disables the inclusion of the Tunnel-Server-Endpoint attribute in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.32 | juniRadiusClientIncludeTunnelTypeInAccessReq, usdRadiusClientIncludeTunnelTypeInAccessReq | 1 | 1 | Enables/disables the inclusion of the Tunnel-Type attribute in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.33 | juniRadiusClientIncludeAcctTunnelConnectionInAcctStart, usdRadiusClientIncludeAcctTunnelConnectionInAcctStart | 1 | 1 | Enables/disables the inclusion of the Acct-Tunnel-Connection attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.34 | juniRadiusClientIncludeCalledStationIdInAcctStart, usdRadiusClientIncludeCalledStationIdInAcctStart | 1 | 1 | Enables/disables the inclusion of the Called-Station-ID attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.35 | juniRadiusClientIncludeCallingStationIdInAcctStart, usdRadiusClientIncludeCallingStationIdInAcctStart | 1 | 1 | Enables/disables the inclusion of the Calling-Station-ID attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.36 | juniRadiusClientIncludeClassInAcctStart, usdRadiusClientIncludeClassInAcctStart | 1 | 1 | Enables/disables the inclusion of the Class attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.37 | juniRadiusClientIncludeConnectInfoInAcctStart, usdRadiusClientIncludeConnectInfoInAcctStart | 1 | 1 | Enables/disables the inclusion of the Connect-Info attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.38 | juniRadiusClientIncludeEgressPolicyNameInAcctStart, usdRadiusClientIncludeEgressPolicyNameInAcctStart | 1 | 1 | Enables/disables the inclusion of the Egress-Policy-Name (VSA) attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.39 | juniRadiusClientIncludeEventTimestampInAcctStart, usdRadiusClientIncludeEventTimestampInAcctStart | 1 | 1 | Enables/disables the inclusion of the Event-Timestamp attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.40 | juniRadiusClientIncludeFramedCompressionInAcctStart, usdRadiusClientIncludeFramedCompressionInAcctStart | 1 | 1 | Enables/disables the inclusion of the Framed-Compression attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.41 | juniRadiusClientIncludeFramedIpNetmaskInAcctStart, usdRadiusClientIncludeFramedIpNetmaskInAcctStart | 1 | 1 | Enables/disables the inclusion of the Framed-IP-Netmask attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.42 | juniRadiusClientIncludeIngressPolicyNameInAcctStart, usdRadiusClientIncludeIngressPolicyNameInAcctStart | 1 | 1 | Enables/disables the inclusion of the Ingress-Policy-Name (VSA) attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.43 | juniRadiusClientIncludeNasIdentifierInAcctStart, usdRadiusClientIncludeNasIdentifierInAcctStart | 1 | 1 | Enables/disables the inclusion of the NAS-Identifier attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.44 | juniRadiusClientIncludeNasPortInAcctStart, usdRadiusClientIncludeNasPortInAcctStart | 1 | 1 | Enables/disables the inclusion of the NAS-Port attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.45 | juniRadiusClientIncludeNasPortIdInAcctStart, usdRadiusClientIncludeNasPortIdInAcctStart | 1 | 1 | Enables/disables the inclusion of the NAS-Port-ID attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.46 | juniRadiusClientIncludeNasPortTypeInAcctStart, usdRadiusClientIncludeNasPortTypeInAcctStart | 1 | 1 | Enables/disables the inclusion of the NAS-Port-Type attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.47 | juniRadiusClientIncludePppoeDescriptionInAcctStart, usdRadiusClientIncludePppoeDescriptionInAcctStart | 1 | 1 | Enables/disables the inclusion of the PPPoE-Description (VSA) attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.48 | juniRadiusClientIncludeTunnelAssignmentIdInAcctStart, usdRadiusClientIncludeTunnelAssignmentIdInAcctStart | 1 | 1 | Enables/disables the inclusion of the Tunnel-Assignment-Id attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.49 | juniRadiusClientIncludeTunnelClientAuthIdInAcctStart, usdRadiusClientIncludeTunnelClientAuthIdInAcctStart | 1 | 1 | Enables/disables the inclusion of the Tunnel-Client-Auth-Id attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.50 | juniRadiusClientIncludeTunnelClientEndpointInAcctStart, usdRadiusClientIncludeTunnelClientEndpointInAcctStart | 1 | 1 | Enables/disables the inclusion of the Tunnel-Client-Endpoint attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.51 | juniRadiusClientIncludeTunnelMediumTypeInAcctStart, usdRadiusClientIncludeTunnelMediumTypeInAcctStart | 1 | 1 | Enables/disables the inclusion of the Tunnel-Medium attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.52 | juniRadiusClientIncludeTunnelPreferenceInAcctStart, usdRadiusClientIncludeTunnelPreferenceInAcctStart | 1 | 1 | Enables/disables the inclusion of the Tunnel-Preference attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.53 | juniRadiusClientIncludeTunnelServerAttributesInAcctStart, usdRadiusClientIncludeTunnelServerAttributesInAcctStart | 1 | 1 | Enables/disables the inclusion of the Tunnel-Server attributes (Tunnel attributes for a PPP session terminated on the LNS) in th… |
1.3.6.1.4.1.4874.2.2.19.1.1.54 | juniRadiusClientIncludeTunnelServerAuthIdInAcctStart, usdRadiusClientIncludeTunnelServerAuthIdInAcctStart | 1 | 1 | Enables/disables the inclusion of the Tunnel-Server-Auth-Id attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.55 | juniRadiusClientIncludeTunnelServerEndpointInAcctStart, usdRadiusClientIncludeTunnelServerEndpointInAcctStart | 1 | 1 | Enables/disables the inclusion of the Tunnel-Server-Endpoint attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.56 | juniRadiusClientIncludeTunnelTypeInAcctStart, usdRadiusClientIncludeTunnelTypeInAcctStart | 1 | 1 | Enables/disables the inclusion of the Tunnel-Type attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.57 | juniRadiusClientIncludeAcctTunnelConnectionInAcctStop, usdRadiusClientIncludeAcctTunnelConnectionInAcctStop | 1 | 1 | Enables/disables the inclusion of the Acct-Tunnel-Connection attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.59 | juniRadiusClientIncludeCalledStationIdInAcctStop, usdRadiusClientIncludeCalledStationIdInAcctStop | 1 | 1 | Enables/disables the inclusion of the Called-Station-ID attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.60 | juniRadiusClientIncludeCallingStationIdInAcctStop, usdRadiusClientIncludeCallingStationIdInAcctStop | 1 | 1 | Enables/disables the inclusion of the Calling-Station-ID attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.61 | juniRadiusClientIncludeClassInAcctStop, usdRadiusClientIncludeClassInAcctStop | 1 | 1 | Enables/disables the inclusion of the Class attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.62 | juniRadiusClientIncludeConnectInfoInAcctStop, usdRadiusClientIncludeConnectInfoInAcctStop | 1 | 1 | Enables/disables the inclusion of the Connect-Info attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.63 | juniRadiusClientIncludeEgressPolicyNameInAcctStop, usdRadiusClientIncludeEgressPolicyNameInAcctStop | 1 | 1 | Enables/disables the inclusion of the Egress-Policy-Name (VSA) attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.64 | juniRadiusClientIncludeEventTimestampInAcctStop, usdRadiusClientIncludeEventTimestampInAcctStop | 1 | 1 | Enables/disables the inclusion of the Event-Timestamp attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.65 | juniRadiusClientIncludeFramedCompressionInAcctStop, usdRadiusClientIncludeFramedCompressionInAcctStop | 1 | 1 | Enables/disables the inclusion of the Framed-Compression attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.66 | juniRadiusClientIncludeFramedIpNetmaskInAcctStop, usdRadiusClientIncludeFramedIpNetmaskInAcctStop | 1 | 1 | Enables/disables the inclusion of the Framed-IP-Netmask attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.67 | juniRadiusClientIncludeIngressPolicyNameInAcctStop, usdRadiusClientIncludeIngressPolicyNameInAcctStop | 1 | 1 | Enables/disables the inclusion of the Ingress-Policy-Name (VSA) attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.68 | juniRadiusClientIncludeInputGigawordsInAcctStop, usdRadiusClientIncludeInputGigawordsInAcctStop | 1 | 1 | Enables/disables the inclusion of the Input-Gigawords attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.69 | juniRadiusClientIncludeNasIdentifierInAcctStop, usdRadiusClientIncludeNasIdentifierInAcctStop | 1 | 1 | Enables/disables the inclusion of the NAS-Identifier attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.70 | juniRadiusClientIncludeNasPortInAcctStop, usdRadiusClientIncludeNasPortInAcctStop | 1 | 1 | Enables/disables the inclusion of the NAS-Port attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.71 | juniRadiusClientIncludeNasPortIdInAcctStop, usdRadiusClientIncludeNasPortIdInAcctStop | 1 | 1 | Enables/disables the inclusion of the NAS-Port-ID attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.72 | juniRadiusClientIncludeNasPortTypeInAcctStop, usdRadiusClientIncludeNasPortTypeInAcctStop | 1 | 1 | Enables/disables the inclusion of the NAS-Port-Type attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.73 | juniRadiusClientIncludeOutputGigawordsInAcctStop, usdRadiusClientIncludeOutputGigawordsInAcctStop | 1 | 1 | Enables/disables the inclusion of the Output-Gigawords attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.74 | juniRadiusClientIncludePppoeDescriptionInAcctStop, usdRadiusClientIncludePppoeDescriptionInAcctStop | 1 | 1 | Enables/disables the inclusion of the PPPoE-Description (VSA) attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.75 | juniRadiusClientIncludeTunnelAssignmentIdInAcctStop, usdRadiusClientIncludeTunnelAssignmentIdInAcctStop | 1 | 1 | Enables/disables the inclusion of the Tunnel-Assignment-Id attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.76 | juniRadiusClientIncludeTunnelClientAuthIdInAcctStop, usdRadiusClientIncludeTunnelClientAuthIdInAcctStop | 1 | 1 | Enables/disables the inclusion of the Tunnel-Client-Auth-Id attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.77 | juniRadiusClientIncludeTunnelClientEndpointInAcctStop, usdRadiusClientIncludeTunnelClientEndpointInAcctStop | 1 | 1 | Enables/disables the inclusion of the Tunnel-Client-Endpoint attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.78 | juniRadiusClientIncludeTunnelMediumTypeInAcctStop, usdRadiusClientIncludeTunnelMediumTypeInAcctStop | 1 | 1 | Enables/disables the inclusion of the Tunnel-Medium attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.79 | juniRadiusClientIncludeTunnelPreferenceInAcctStop, usdRadiusClientIncludeTunnelPreferenceInAcctStop | 1 | 1 | Enables/disables the inclusion of the Tunnel-Preference attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.80 | juniRadiusClientIncludeTunnelServerAttributesInAcctStop, usdRadiusClientIncludeTunnelServerAttributesInAcctStop | 1 | 1 | Enables/disables the inclusion of the Tunnel-Server attributes (Tunnel attributes for a PPP session terminated on the LNS) in th… |
1.3.6.1.4.1.4874.2.2.19.1.1.81 | juniRadiusClientIncludeTunnelServerAuthIdInAcctStop, usdRadiusClientIncludeTunnelServerAuthIdInAcctStop | 1 | 1 | Enables/disables the inclusion of the Tunnel-Server-Auth-Id attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.82 | juniRadiusClientIncludeTunnelServerEndpointInAcctStop, usdRadiusClientIncludeTunnelServerEndpointInAcctStop | 1 | 1 | Enables/disables the inclusion of the Tunnel-Server-Endpoint attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.83 | juniRadiusClientIncludeTunnelTypeInAcctStop, usdRadiusClientIncludeTunnelTypeInAcctStop | 1 | 1 | Enables/disables the inclusion of the Tunnel-Type attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.84 | juniRadiusClientIncludeInputGigapktsInAcctStop, usdRadiusClientIncludeInputGigapktsInAcctStop | 1 | 1 | Enables/disables the inclusion of the Input-Gigapkts attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.85 | juniRadiusClientIncludeOutputGigapktsInAcctStop, usdRadiusClientIncludeOutputGigapktsInAcctStop | 1 | 1 | Enables/disables the inclusion of the Output-Gigapkts attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.86 | juniRadiusClientIgnoreFramedIpNetmask, usdRadiusClientIgnoreFramedIpNetmask | 1 | 1 | Enables/disables ignoring the Framed-IP-Netmask attribute in the RADIUS Access-Accept packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.87 | juniRadiusClientIgnoreAtmCategory | 1 | 1 | Enables/disables ignoring the ATM-Category (vsa) attribute in the RADIUS Access-Accept packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.88 | juniRadiusClientIgnoreAtmMbs | 1 | 1 | Enables/disables ignoring the ATM-MBS (vsa) attribute in the RADIUS Access-Accept packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.89 | juniRadiusClientIgnoreAtmPcr | 1 | 1 | Enables/disables ignoring the ATM-PCR (vsa) attribute in the RADIUS Access-Accept packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.90 | juniRadiusClientIgnoreAtmScr | 1 | 1 | Enables/disables ignoring the ATM-SCR-Or-CBR (vsa) attribute in the RADIUS Access-Accept packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.91 | juniRadiusClientIgnoreEgressPolicyName | 1 | 1 | Enables/disables ignoring the Egress-Policy-Name (vsa) attribute in the RADIUS Access-Accept packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.92 | juniRadiusClientIgnoreIngressPolicyName | 1 | 1 | Enables/disables ignoring the Ingress-Policy-Name (vsa) attribute in the RADIUS Access-Accept packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.93 | juniRadiusClientIgnoreVirtualRouter | 1 | 1 | Enables/disables ignoring the Virtual-Router (vsa) attribute in the RADIUS Access-Accept packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.94 | juniRadiusClientTrapOnAuthServerUnavailable | 1 | 1 | Enables/disables sending an SNMP trap for the condition that a specific RADIUS authentication server times out. |
1.3.6.1.4.1.4874.2.2.19.1.1.95 | juniRadiusClientTrapOnAcctServerUnavailable | 1 | 1 | Enables/disables sending an SNMP trap for the condition that a specific RADIUS accounting server times out. |
1.3.6.1.4.1.4874.2.2.19.1.1.96 | juniRadiusClientTrapOnNoAuthServerAvailable | 1 | 1 | Enables/disables sending an SNMP trap for the condition that all of the configured RADIUS authentication servers (in a virtual r… |
1.3.6.1.4.1.4874.2.2.19.1.1.97 | juniRadiusClientTrapOnNoAcctServerAvailable | 1 | 1 | Enables/disables sending an SNMP trap for the condition that all of the configured RADIUS accounting servers (in a virtual route… |
1.3.6.1.4.1.4874.2.2.19.1.1.98 | juniRadiusClientTrapOnAuthServerAvailable | 1 | 1 | Enables/disables sending an SNMP trap for the condition that a specific RADIUS authentication server has sent a response after b… |
1.3.6.1.4.1.4874.2.2.19.1.1.99 | juniRadiusClientTrapOnAcctServerAvailable | 1 | 1 | Enables/disables sending an SNMP trap for the condition that a specific RADIUS accounting server has sent a response after being… |
1.3.6.1.4.1.4874.2.2.19.1.1.100 | juniRadiusClientPppoeNasPortFormat | 1 | 1 | The format used by the client for the Nas-Port attribute (attribute number 5) for PPPoE interfaces: none Use the format specif… |
1.3.6.1.4.1.4874.2.2.19.1.1.101 | juniRadiusClientIncludeTunnelInterfaceIdInAccessReq | 1 | 1 | Enables/disables the inclusion of the Tunnel-Interface-Id (VSA) attribute in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.102 | juniRadiusClientIncludeTunnelInterfaceIdInAcctStart | 1 | 1 | Enables/disables the inclusion of the Tunnel-Interface-Id (VSA) in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.103 | juniRadiusClientIncludeTunnelInterfaceIdInAcctStop | 1 | 1 | Enables/disables the inclusion of the Tunnel-Interface-Id (VSA) in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.104 | juniRadiusClientIncludeL2tpPppDisconnectCauseInAcctStop | 1 | 1 | Enables/disables the inclusion of the L2TP PPP Disconnect Cause (VSA) in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.105 | juniRadiusClientVlanNasPortFormat | 1 | 1 | The format used by the client for the Nas-Port attribute (attribute number 5) for VLAN interfaces: none Include the VLAN ID i… |
1.3.6.1.4.1.4874.2.2.19.1.1.106 | juniRadiusClientIncludeAcctMultiSessionIdInAccessReq | 1 | 1 | Enables/disables the inclusion of the Accounting Multilink Session ID in the RADIUS Access-Req packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.107 | juniRadiusClientIncludeAcctMultiSessionIdInAcctStart | 1 | 1 | Enables/disables the inclusion of the Accounting Multilink Session ID in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.108 | juniRadiusClientIncludeAcctMultiSessionIdInAcctStop | 1 | 1 | Enables/disables the inclusion of the Accounting Multilink Session ID in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.109 | juniRadiusClientIncludeAscendNumInMultilinkInAccessReq | 1 | 1 | Enables/disables the inclusion of the Ascend Num In Multilink attribute in the RADIUS Access-Req packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.110 | juniRadiusClientIncludeAscendNumInMultilinkInAcctStart | 1 | 1 | Enables/disables the inclusion of the Ascend Num In Multilink attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.111 | juniRadiusClientIncludeAscendNumInMultilinkInAcctStop | 1 | 1 | Enables/disables the inclusion of the Ascend Num In Multilink attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.112 | juniRadiusClientConnectInfoFormat | 1 | 1 | The format used by the client for the Connect-Info attribute (attribute number 77): default The Connect-Info Attribu… |
1.3.6.1.4.1.4874.2.2.19.1.1.113 | juniRadiusClientIncludeProfileServiceDescrInAccessReq | 1 | 1 | Enables/disables the inclusion of the AAA profile service description attribute in the RADIUS Access-Req packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.114 | juniRadiusClientIncludeProfileServiceDescrInAcctStart | 1 | 1 | Enables/disables the inclusion of the AAA profile service description attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.115 | juniRadiusClientIncludeProfileServiceDescrInAcctStop | 1 | 1 | Enables/disables the inclusion of the AAA profile service description attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.116 | juniRadiusClientIncludeAcctAuthenticInAcctOn | 1 | 1 | Enables/disables the inclusion of the acct-authentic attribute in the RADIUS Accounting-On packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.117 | juniRadiusClientIncludeAcctDelayTimeInAcctOn | 1 | 1 | Enables/disables the inclusion of the acct-delay-time attribute in the RADIUS Accounting-On packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.118 | juniRadiusClientIncludeAcctSessionIdInAcctOn | 1 | 1 | Enables/disables the inclusion of the acct-session-id attribute in the RADIUS Accounting-On packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.119 | juniRadiusClientIncludeNasIdentifierInAcctOn | 1 | 1 | Enables/disables the inclusion of the nas-identifier attribute in the RADIUS Accounting-On packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.120 | juniRadiusClientIncludeEventTimestampInAcctOn | 1 | 1 | Enables/disables the inclusion of the event-timestamp attribute in the RADIUS Accounting-On packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.121 | juniRadiusClientIncludeAcctAuthenticInAcctOff | 1 | 1 | Enables/disables the inclusion of the acct-authentic attribute in the RADIUS Accounting-Off packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.122 | juniRadiusClientIncludeAcctDelayTimeInAcctOff | 1 | 1 | Enables/disables the inclusion of the acct-delay-time attribute in the RADIUS Accounting-Off packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.123 | juniRadiusClientIncludeAcctSessionIdInAcctOff | 1 | 1 | Enables/disables the inclusion of the acct-session-id attribute in the RADIUS Accounting-Off packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.124 | juniRadiusClientIncludeAcctTerminateCauseInAcctOff | 1 | 1 | Enables/disables the inclusion of the acct-terminate-cause attribute in the RADIUS Accounting-Off packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.125 | juniRadiusClientIncludeNasIdentifierInAcctOff | 1 | 1 | Enables/disables the inclusion of the nas-identifier attribute in the RADIUS Accounting-Off packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.126 | juniRadiusClientIncludeEventTimestampInAcctOff | 1 | 1 | Enables/disables the inclusion of the event-timestamp attribute in the RADIUS Accounting-Off packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.127 | juniRadiusClientIncludeDhcpOptionsInAccessReq | 1 | 1 | Enables/disables the inclusion of the Dhcp-Options (vsa) attribute in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.128 | juniRadiusClientIncludeDhcpMacAddressInAccessReq | 1 | 1 | Enables/disables the inclusion of the Dhcp-Mac-Addresss (vsa) attribute in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.129 | juniRadiusClientIncludeDhcpGiAddressInAccessReq | 1 | 1 | Enables/disables the inclusion of the Dhcp-Gi-Address (vsa) attribute in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.130 | juniRadiusClientIncludeDhcpOptionsInAcctStart | 1 | 1 | Enables/disables the inclusion of the Dhcp-Options (vsa) attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.131 | juniRadiusClientIncludeDhcpMacAddressInAcctStart | 1 | 1 | Enables/disables the inclusion of the Dhcp-Mac-Addresss (vsa) attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.132 | juniRadiusClientIncludeDhcpGiAddressInAcctStart | 1 | 1 | Enables/disables the inclusion of the Dhcp-Gi-Address (vsa) attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.133 | juniRadiusClientIncludeDhcpOptionsInAcctStop | 1 | 1 | Enables/disables the inclusion of the Dhcp-Options (vsa) attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.134 | juniRadiusClientIncludeDhcpMacAddressInAcctStop | 1 | 1 | Enables/disables the inclusion of the Dhcp-Mac-Addresss (vsa) attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.135 | juniRadiusClientIncludeDhcpGiAddressInAcctStop | 1 | 1 | Enables/disables the inclusion of the Dhcp-Gi-Address (vsa) attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.136 | juniRadiusClientNasPortIdOverrideRemoteCircuitId | 1 | 1 | Enables/disables overriding the Nas-Port-Id with the PPPoe Remote Circuit Id. |
1.3.6.1.4.1.4874.2.2.19.1.1.137 | juniRadiusClientCallingStationIdOverrideRemoteCircuitId | 1 | 1 | Enables/disables overriding the Calling-Station-Id with the PPPoe Remote Circuit Id. |
1.3.6.1.4.1.4874.2.2.19.1.1.138 | juniRadiusClientIncludeMlpppBundleNameInAccessReq | 1 | 1 | Enables/disables the inclusion of the MLPPP-Bundle-Name (VSA) attribute in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.139 | juniRadiusClientIncludeMlpppBundleNameInAcctStart | 1 | 1 | Enables/disables the inclusion of the MLPPP-Bundle-Name (VSA) in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.140 | juniRadiusClientIncludeMlpppBundleNameInAcctStop | 1 | 1 | Enables/disables the inclusion of the MLPPP-Bundle-Name (VSA) in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.141 | juniRadiusClientOverrideNasInfo | 1 | 1 | Enables/disables the overriding nas-ip-address and nas-identifier by values from authentication virual router. If juniRadiusClie… |
1.3.6.1.4.1.4874.2.2.19.1.1.142 | juniRadiusClientIncludeInterfaceDescriptionInAccessReq | 1 | 1 | Enables/disables the inclusion of the interface description attribute in the RADIUS Access-Req packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.143 | juniRadiusClientIncludeInterfaceDescriptionInAcctStart | 1 | 1 | Enables/disables the inclusion of the interface description attribute in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.144 | juniRadiusClientIncludeInterfaceDescriptionInAcctStop | 1 | 1 | Enables/disables the inclusion of the interface description attribute in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.145 | juniRadiusClientAtmNasPortFormat | 1 | 1 | The format used by the client for the Nas-Port attribute (attribute number 5) for ATM interfaces: none Use the format specif… |
1.3.6.1.4.1.4874.2.2.19.1.1.146 | juniRadiusClientNasPortFieldWidthAtmSlot | 1 | 1 | Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the slot of the atm interface when the value… |
1.3.6.1.4.1.4874.2.2.19.1.1.147 | juniRadiusClientNasPortFieldWidthAtmAdapter | 1 | 1 | Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the adapter of the atm interface when the va… |
1.3.6.1.4.1.4874.2.2.19.1.1.148 | juniRadiusClientNasPortFieldWidthAtmPort | 1 | 1 | Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the port of the atm interface when the value… |
1.3.6.1.4.1.4874.2.2.19.1.1.149 | juniRadiusClientNasPortFieldWidthAtmVpi | 1 | 1 | Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the vpi of the atm interface when the value … |
1.3.6.1.4.1.4874.2.2.19.1.1.150 | juniRadiusClientNasPortFieldWidthAtmVci | 1 | 1 | Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the vci of the atm interface when the value … |
1.3.6.1.4.1.4874.2.2.19.1.1.151 | juniRadiusClientEthernetNasPortFormat | 1 | 1 | The format used by the client for the Nas-Port attribute (attribute number 5) for Ethernet interfaces: none Use the format s… |
1.3.6.1.4.1.4874.2.2.19.1.1.152 | juniRadiusClientNasPortFieldWidthEthernetSlot | 1 | 1 | Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the slot of the ethernet interface when the … |
1.3.6.1.4.1.4874.2.2.19.1.1.153 | juniRadiusClientNasPortFieldWidthEthernetAdapter | 1 | 1 | Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the adapter of the ethernet interface when t… |
1.3.6.1.4.1.4874.2.2.19.1.1.154 | juniRadiusClientNasPortFieldWidthEthernetPort | 1 | 1 | Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the port of the ethernet interface when the … |
1.3.6.1.4.1.4874.2.2.19.1.1.155 | juniRadiusClientNasPortFieldWidthEthernetSVlan | 1 | 1 | Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the svlan of the ethernet interface when the… |
1.3.6.1.4.1.4874.2.2.19.1.1.156 | juniRadiusClientNasPortFieldWidthEthernetVlan | 1 | 1 | Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the vlan of the ethernet interface when the … |
1.3.6.1.4.1.4874.2.2.19.1.1.157 | juniRadiusClientRemoteCircuitIdFormat | 1 | 1 | The set of PPPoE Remote Circuit Id components configured. Each octet in this object contains one of the values defined in the Jun… |
1.3.6.1.4.1.4874.2.2.19.1.1.158 | juniRadiusClientRemoteCircuitIdDelimiter | 1 | 1 | The character use as for delimiting fields in the PPPoE Remote Circuit ID. The default value is '#'. |
1.3.6.1.4.1.4874.2.2.19.1.1.159 | juniRadiusClientIncludeL2cAccessLoopParametersInAccessReq | 1 | 1 | Enables/disables the inclusion of the l2c-access-loop-parameters (VSA) in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.160 | juniRadiusClientIncludeL2cDownStreamDataInAccessReq | 1 | 1 | Enables/disables the inclusion of the l2c-down-stream-data (VSA) in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.161 | juniRadiusClientIncludeL2cUpStreamDataInAccessReq | 1 | 1 | Enables/disables the inclusion of the l2c-up-stream-data (VSA) in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.162 | juniRadiusClientIncludeL2cDownStreamDataInAcctStart | 1 | 1 | Enables/disables the inclusion of the l2c-down-stream-data (VSA) in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.163 | juniRadiusClientIncludeL2cUpStreamDataInAcctStart | 1 | 1 | Enables/disables the inclusion of the l2c-up-stream-data (VSA) in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.164 | juniRadiusClientIncludeL2cDownStreamDataInAcctStop | 1 | 1 | Enables/disables the inclusion of the l2c-down-stream-data (VSA) in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.165 | juniRadiusClientIncludeL2cUpStreamDataInAcctStop | 1 | 1 | Enables/disables the inclusion of the l2c-up-stream-data (VSA) in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.166 | juniRadiusClientIncludeDslForumAttributesInAccessReq | 1 | 1 | Enables/disables the inclusion of the DSL Forum attributes (VSA) in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.167 | juniRadiusClientIncludeDslForumAttributesInAcctStart | 1 | 1 | Enables/disables the inclusion of the DSL Forum attributes (VSA) in the RADIUS Accounting-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.168 | juniRadiusClientIncludeDslForumAttributesInAcctStop | 1 | 1 | Enables/disables the inclusion of the DSL Forum attributes (VSA) in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.169 | juniRadiusClientIncludeL2cAccessLoopCircuitIdInAccessReq | 1 | 1 | Enables/disables the inclusion of l2cd-acc-loop-cir-id (VSA) in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.170 | juniRadiusClientIncludeL2cAccessAggrCircuitIdBinaryInAccessReq | 1 | 1 | Enables/disables the inclusion of l2cd-acc-aggr-cir-id-bin (VSA) in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.171 | juniRadiusClientIncludeL2cAccessAggrCircuitIdAsciiInAccessReq | 1 | 1 | Enables/disables the inclusion of l2cd-acc-aggr-cir-id-asc (VSA) in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.172 | juniRadiusClientIncludeL2cActualDataRateUstrInAccessReq | 1 | 1 | Enables/disables the inclusion of l2cd-act-data-rate-up (VSA) in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.173 | juniRadiusClientIncludeL2cActualDataRateDstrInAccessReq | 1 | 1 | Enables/disables the inclusion of l2cd-act-data-rate-dn (VSA) in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.174 | juniRadiusClientIncludeL2cMinimumDataRateUstrInAccessReq | 1 | 1 | Enables/disables the inclusion of l2cd-min-data-rate-up (VSA) in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.175 | juniRadiusClientIncludeL2cMinimumDataRateDstrInAccessReq | 1 | 1 | Enables/disables the inclusion of l2cd-in-data-rate-dn (VSA) in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.176 | juniRadiusClientIncludeL2cAttainDataRateUstrInAccessReq | 1 | 1 | Enables/disables the inclusion of l2cd-att-data-rate-up (VSA) in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.177 | juniRadiusClientIncludeL2cAttainDataRateDstrInAccessReq | 1 | 1 | Enables/disables the inclusion of l2cd-att-data-rate-dn (VSA) in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.178 | juniRadiusClientIncludeL2cMaximumDataRateUstrInAccessReq | 1 | 1 | Enables/disables the inclusion of l2cd-max-data-rate-up (VSA) in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.179 | juniRadiusClientIncludeL2cMaximumDataRateDstrInAccessReq | 1 | 1 | Enables/disables the inclusion of l2cd-max-data-rate-dn (VSA) in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.180 | juniRadiusClientIncludeL2cMinLowPowerDataRateUstrInAccessReq | 1 | 1 | Enables/disables the inclusion of l2cd-min-lp-data-rate-up (VSA) in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.181 | juniRadiusClientIncludeL2cMinLowPowerDataRateDstrInAccessReq | 1 | 1 | Enables/disables the inclusion of l2cd-min-lp-data-rate-dn (VSA) in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.182 | juniRadiusClientIncludeL2cMaxInterleavingDelayUstrInAccessReq | 1 | 1 | Enables/disables the inclusion of l2cd-max-interlv-delay-up (VSA) in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.183 | juniRadiusClientIncludeL2cActInterleavingDelayUstrInAccessReq | 1 | 1 | Enables/disables the inclusion of l2cd-act-interlv-delay-up (VSA) in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.184 | juniRadiusClientIncludeL2cMaxInterleavingDelayDstrInAccessReq | 1 | 1 | Enables/disables the inclusion of l2cd-max-interlv-delay-dn (VSA) in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.185 | juniRadiusClientIncludeL2cActInterleavingDelayDstrInAccessReq | 1 | 1 | Enables/disables the inclusion of l2cd-act-interlv-delay-dn (VSA) in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.186 | juniRadiusClientIncludeL2cDslLineStateInAccessReq | 1 | 1 | Enables/disables the inclusion of l2cd-dsl-line-state (VSA) in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.187 | juniRadiusClientIncludeL2cDslTypeInAccessReq | 1 | 1 | Enables/disables the inclusion of l2cd-dsl-type (VSA) in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.188 | juniRadiusClientIncludeL2cAccessLoopCircuitIdInAcctStart | 1 | 1 | Enables/disables the inclusion of l2cd-acc-loop-cir-id (VSA) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.189 | juniRadiusClientIncludeL2cAccessAggrCircuitIdBinaryInAcctStart | 1 | 1 | Enables/disables the inclusion of l2cd-acc-aggr-cir-id-bin (VSA) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.190 | juniRadiusClientIncludeL2cAccessAggrCircuitIdAsciiInAcctStart | 1 | 1 | Enables/disables the inclusion of l2cd-acc-aggr-cir-id-asc (VSA) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.191 | juniRadiusClientIncludeL2cActualDataRateUstrInAcctStart | 1 | 1 | Enables/disables the inclusion of l2cd-act-data-rate-up (VSA) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.192 | juniRadiusClientIncludeL2cActualDataRateDstrInAcctStart | 1 | 1 | Enables/disables the inclusion of l2cd-act-data-rate-dn (VSA) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.193 | juniRadiusClientIncludeL2cMinimumDataRateUstrInAcctStart | 1 | 1 | Enables/disables the inclusion of l2cd-min-data-rate-up (VSA) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.194 | juniRadiusClientIncludeL2cMinimumDataRateDstrInAcctStart | 1 | 1 | Enables/disables the inclusion of l2cd-in-data-rate-dn (VSA) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.195 | juniRadiusClientIncludeL2cAttainDataRateUstrInAcctStart | 1 | 1 | Enables/disables the inclusion of l2cd-att-data-rate-up (VSA) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.196 | juniRadiusClientIncludeL2cAttainDataRateDstrInAcctStart | 1 | 1 | Enables/disables the inclusion of l2cd-att-data-rate-dn (VSA) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.197 | juniRadiusClientIncludeL2cMaximumDataRateUstrInAcctStart | 1 | 1 | Enables/disables the inclusion of l2cd-max-data-rate-up (VSA) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.198 | juniRadiusClientIncludeL2cMaximumDataRateDstrInAcctStart | 1 | 1 | Enables/disables the inclusion of l2cd-max-data-rate-dn (VSA) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.199 | juniRadiusClientIncludeL2cMinLowPowerDataRateUstrInAcctStart | 1 | 1 | Enables/disables the inclusion of l2cd-min-lp-data-rate-up (VSA) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.200 | juniRadiusClientIncludeL2cMinLowPowerDataRateDstrInAcctStart | 1 | 1 | Enables/disables the inclusion of l2cd-min-lp-data-rate-dn (VSA) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.201 | juniRadiusClientIncludeL2cMaxInterleavingDelayUstrInAcctStart | 1 | 1 | Enables/disables the inclusion of l2cd-max-interlv-delay-up (VSA) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.202 | juniRadiusClientIncludeL2cActInterleavingDelayUstrInAcctStart | 1 | 1 | Enables/disables the inclusion of l2cd-act-interlv-delay-up (VSA) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.203 | juniRadiusClientIncludeL2cMaxInterleavingDelayDstrInAcctStart | 1 | 1 | Enables/disables the inclusion of l2cd-max-interlv-delay-dn (VSA) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.204 | juniRadiusClientIncludeL2cActInterleavingDelayDstrInAcctStart | 1 | 1 | Enables/disables the inclusion of l2cd-act-interlv-delay-dn (VSA) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.205 | juniRadiusClientIncludeL2cDslLineStateInAcctStart | 1 | 1 | Enables/disables the inclusion of l2cd-dsl-line-state (VSA) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.206 | juniRadiusClientIncludeL2cDslTypeInAcctStart | 1 | 1 | Enables/disables the inclusion of l2cd-dsl-type (VSA) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.207 | juniRadiusClientIncludeL2cAccessLoopCircuitIdInAcctStop | 1 | 1 | Enables/disables the inclusion of l2cd-acc-loop-cir-id (VSA) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.208 | juniRadiusClientIncludeL2cAccessAggrCircuitIdBinaryInAcctStop | 1 | 1 | Enables/disables the inclusion of l2cd-acc-aggr-cir-id-bin (VSA) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.209 | juniRadiusClientIncludeL2cAccessAggrCircuitIdAsciiInAcctStop | 1 | 1 | Enables/disables the inclusion of l2cd-acc-aggr-cir-id-asc (VSA) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.210 | juniRadiusClientIncludeL2cActualDataRateUstrInAcctStop | 1 | 1 | Enables/disables the inclusion of l2cd-act-data-rate-up (VSA) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.211 | juniRadiusClientIncludeL2cActualDataRateDstrInAcctStop | 1 | 1 | Enables/disables the inclusion of l2cd-act-data-rate-dn (VSA) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.212 | juniRadiusClientIncludeL2cMinimumDataRateUstrInAcctStop | 1 | 1 | Enables/disables the inclusion of l2cd-min-data-rate-up (VSA) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.213 | juniRadiusClientIncludeL2cMinimumDataRateDstrInAcctStop | 1 | 1 | Enables/disables the inclusion of l2cd-in-data-rate-dn (VSA) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.214 | juniRadiusClientIncludeL2cAttainDataRateUstrInAcctStop | 1 | 1 | Enables/disables the inclusion of l2cd-att-data-rate-up (VSA) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.215 | juniRadiusClientIncludeL2cAttainDataRateDstrInAcctStop | 1 | 1 | Enables/disables the inclusion of l2cd-att-data-rate-dn (VSA) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.216 | juniRadiusClientIncludeL2cMaximumDataRateUstrInAcctStop | 1 | 1 | Enables/disables the inclusion of l2cd-max-data-rate-up (VSA) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.217 | juniRadiusClientIncludeL2cMaximumDataRateDstrInAcctStop | 1 | 1 | Enables/disables the inclusion of l2cd-max-data-rate-dn (VSA) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.218 | juniRadiusClientIncludeL2cMinLowPowerDataRateUstrInAcctStop | 1 | 1 | Enables/disables the inclusion of l2cd-min-lp-data-rate-up (VSA) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.219 | juniRadiusClientIncludeL2cMinLowPowerDataRateDstrInAcctStop | 1 | 1 | Enables/disables the inclusion of l2cd-min-lp-data-rate-dn (VSA) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.220 | juniRadiusClientIncludeL2cMaxInterleavingDelayUstrInAcctStop | 1 | 1 | Enables/disables the inclusion of l2cd-max-interlv-delay-up (VSA) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.221 | juniRadiusClientIncludeL2cActInterleavingDelayUstrInAcctStop | 1 | 1 | Enables/disables the inclusion of l2cd-act-interlv-delay-up (VSA) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.222 | juniRadiusClientIncludeL2cMaxInterleavingDelayDstrInAcctStop | 1 | 1 | Enables/disables the inclusion of l2cd-max-interlv-delay-dn (VSA) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.223 | juniRadiusClientIncludeL2cActInterleavingDelayDstrInAcctStop | 1 | 1 | Enables/disables the inclusion of l2cd-act-interlv-delay-dn (VSA) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.224 | juniRadiusClientIncludeL2cDslLineStateInAcctStop | 1 | 1 | Enables/disables the inclusion of l2cd-dsl-line-state (VSA) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.225 | juniRadiusClientIncludeL2cDslTypeInAcctStop | 1 | 1 | Enables/disables the inclusion of l2cd-dsl-type (VSA) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.226 | juniRadiusClientIncludeInterfaceIdInAcctStart | 1 | 1 | Enables/disables the inclusion of framed-interface-id (96) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.227 | juniRadiusClientIncludeIpv6PrefixInAcctStart | 1 | 1 | Enables/disables the inclusion of framed-ipv6-prefix (97) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.228 | juniRadiusClientIncludeInterfaceIdInAcctStop | 1 | 1 | Enables/disables the inclusion of framed-interface-id (96) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.229 | juniRadiusClientIncludeIpAddrInAcctStop | 1 | 1 | Enables/disables the inclusion of framed-ip-address (8) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.230 | juniRadiusClientIncludeIpv6PrefixInAcctStop | 1 | 1 | Enables/disables the inclusion of framed-ipv6-prefix (97) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.231 | juniRadiusClientIncludeDownStreamCalculatedQosRateInAccessReq | 1 | 1 | Enables/disables the inclusion of downstream-calculated-qos-rate (VSA) in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.232 | juniRadiusClientIncludeUpStreamCalculatedQosRateInAccessReq | 1 | 1 | Enables/disables the inclusion of upstream-calculated-qos-rate (VSA) in the RADIUS Access-Request packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.233 | juniRadiusClientIncludeDownStreamCalculatedQosRateInAcctStart | 1 | 1 | Enables/disables the inclusion of downstream-calculated-qos-rate (VSA) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.234 | juniRadiusClientIncludeUpStreamCalculatedQosRateInAcctStart | 1 | 1 | Enables/disables the inclusion of upstream-calculated-qos-rate (VSA) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.235 | juniRadiusClientIncludeDownStreamCalculatedQosRateInAcctStop | 1 | 1 | Enables/disables the inclusion of downstream-calculated-qos-rate (VSA) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.236 | juniRadiusClientIncludeUpStreamCalculatedQosRateInAcctStop | 1 | 1 | Enables/disables the inclusion of upstream-calculated-qos-rate (VSA) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.237 | juniRadiusClientIgnorePppoeMaxSession | 1 | 1 | Enables/disables ignoring the PPPoE Max Session (vsa) attribute in the RADIUS Access-Accept packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.238 | juniRadiusClientIncludeIpv6AccountingInAcctStop | 0 | 0 | Enables/disables the inclusion of the IPv6 Accounting (VSA) attributes in the RADIUS Accounting-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.239 | juniRadiusClientIncludeDelegatedIpv6PrefixInAcctStart | 0 | 0 | Enables/disables the inclusion of delegated-ipv6-prefix (123) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.240 | juniRadiusClientIncludeDelegatedIpv6PrefixInAcctStop | 0 | 0 | Enables/disables the inclusion of delegated-ipv6-prefix (123) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.241 | juniRadiusClientIncludeFramedIpv6PoolInAcctStart | 0 | 0 | Enables/disables the inclusion of framed-ipv6-pool (100) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.242 | juniRadiusClientIncludeFramedIpv6PoolInAcctStop | 0 | 0 | Enables/disables the inclusion of framed-ipv6-pool (100) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.243 | juniRadiusClientIncludeFramedIpv6RouteInAcctStart | 0 | 0 | Enables/disables the inclusion of framed-ipv6-route (99) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.244 | juniRadiusClientIncludeFramedIpv6RouteInAcctStop | 0 | 0 | Enables/disables the inclusion of framed-ipv6-route (99) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.245 | juniRadiusClientIncludeIpv6LocalInterfaceInAcctStart | 0 | 0 | Enables/disables the inclusion of ipv6-local-interface (vsa) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.246 | juniRadiusClientIncludeIpv6LocalInterfaceInAcctStop | 0 | 0 | Enables/disables the inclusion of ipv6-local-interface (vsa) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.247 | juniRadiusClientIncludeIpv6NdRaPrefixInAcctStart | 0 | 0 | Enables/disables the inclusion of ipv6-nd-ra-prefix (vsa) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.248 | juniRadiusClientIncludeIpv6NdRaPrefixInAcctStop | 0 | 0 | Enables/disables the inclusion of ipv6-nd-ra-prefix (vsa) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.249 | juniRadiusClientIncludeIpv6PrimaryDnsInAcctStart | 0 | 0 | Enables/disables the inclusion of ipv6-primary-dns (vsa) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.250 | juniRadiusClientIncludeIpv6PrimaryDnsInAcctStop | 0 | 0 | Enables/disables the inclusion of ipv6-primary-dns (vsa) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.251 | juniRadiusClientIncludeIpv6SecondaryDnsInAcctStart | 0 | 0 | Enables/disables the inclusion of ipv6-secondary-dns (vsa) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.252 | juniRadiusClientIncludeIpv6SecondaryDnsInAcctStop | 0 | 0 | Enables/disables the inclusion of ipv6-secondary-dns (vsa) in the RADIUS Acct-Stop packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.253 | juniRadiusClientIncludeIpv6VirtualRouterInAcctStart | 0 | 0 | Enables/disables the inclusion of ipv6-virtual-router (vsa) in the RADIUS Acct-Start packet. |
1.3.6.1.4.1.4874.2.2.19.1.1.254 | juniRadiusClientIncludeIpv6VirtualRouterInAcctStop | 0 | 0 | Enables/disables the inclusion of ipv6-virtual-router (vsa) in the RADIUS Acct-Stop packet. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.4874.2.2.19.1.2 | juniRadiusAuthClient, usdRadiusAuthClient | 3 | 29 | None |
1.3.6.1.4.1.4874.2.2.19.1.3 | juniRadiusAcctClient, usdRadiusAcctClient | 3 | 35 | None |