On get each bit indicates whether the corresponding attribute is
configured or unconfigured:
0 = The attribute is configured (i.e. the configured value is the
operational value).
1 = The attribute is unconfigured (i.e. the operational value is
inherited from the a higher level which could be the default
value).
Getting the attribute value itself always returns the operational value
of that attribute regardless of whether the attribute is configured or
unconfigured.
On write each bit indicates wheter or not the corresponding attribute
should be set to the unconfigured state:
0 = No operation (i.e. do not change the state of the attribute).
1 = Set the attribute to the unconfigured state.
Setting an attribute to a value has the automatic side-effect of setting
the bit with the same name to zero.
Parsed from file usDataBgp.mi2.txt
Company: None
Module: Unisphere-Data-BGP-MIB
On get each bit indicates whether the corresponding attribute is
configured or unconfigured:
0 = The attribute is configured (i.e. the configured value is the
operational value).
1 = The attribute is unconfigured (i.e. the operational value is
inherited from the a higher level which could be the default
value).
Getting the attribute value itself always returns the operational value
of that attribute regardless of whether the attribute is configured or
unconfigured.
On write each bit indicates wheter or not the corresponding attribute
should be set to the unconfigured state:
0 = No operation (i.e. do not change the state of the attribute).
1 = Set the attribute to the unconfigured state.
Setting an attribute to a value has the automatic side-effect of setting
the bit with the same name to zero.
Parsed from file Unisphere-Data-BGP-MIB.mib
Module: Unisphere-Data-BGP-MIB
Vendor: Juniper Networks/Unisphere
Module: Juniper-BGP-MIB
[Automatically extracted from oidview.com]
usdBgpPeerGroupAddressFamilyUnconfiguredAttributes OBJECT-TYPE SYNTAX BITS { usdBgpPeerGroupAddressFamilyDefaultOriginate(0), usdBgpPeerGroupAddressFamilyNextHopSelf(1), usdBgpPeerGroupAddressFamilySendCommunity(2), usdBgpPeerGroupAddressFamilyDistributeListIn(3), usdBgpPeerGroupAddressFamilyDistributeListOut(4), usdBgpPeerGroupAddressFamilyPrefixListIn(5), usdBgpPeerGroupAddressFamilyPrefixListOut(6), usdBgpPeerGroupAddressFamilyPrefixTreeIn(7), usdBgpPeerGroupAddressFamilyPrefixTreeOut(8), usdBgpPeerGroupAddressFamilyFilterListIn(9), usdBgpPeerGroupAddressFamilyFilterListOut(10), usdBgpPeerGroupAddressFamilyFilterListWeight(11), usdBgpPeerGroupAddressFamilyFilterListWeightValue(12), usdBgpPeerGroupAddressFamilyRouteMapIn(13), usdBgpPeerGroupAddressFamilyRouteMapOut(14), usdBgpPeerGroupAddressFamilyRouteReflectorClient(15), usdBgpPeerGroupAddressFamilyRouteLimitWarn(16), usdBgpPeerGroupAddressFamilyRouteLimitReset(17), usdBgpPeerGroupAddressFamilyRouteLimitWarnOnly(18), usdBgpPeerGroupAddressFamilyRemovePrivateAs(19), usdBgpPeerGroupAddressFamilyUnsuppressMap(20), usdBgpPeerGroupAddressFamilyInboundSoftReconfig(21), usdBgpPeerGroupAddressFamilyAsOverride(22), usdBgpPeerGroupAddressFamilyAllowAsIn(23), usdBgpPeerGroupAddressFamilySendExtendedCommunity(24) } MAX-ACCESS read-create STATUS current DESCRIPTION "On get each bit indicates whether the corresponding attribute is configured or unconfigured: 0 = The attribute is configured (i.e. the configured value is the operational value). 1 = The attribute is unconfigured (i.e. the operational value is inherited from the a higher level which could be the default value). Getting the attribute value itself always returns the operational value of that attribute regardless of whether the attribute is configured or unconfigured. On write each bit indicates wheter or not the corresponding attribute should be set to the unconfigured state: 0 = No operation (i.e. do not change the state of the attribute). 1 = Set the attribute to the unconfigured state. Setting an attribute to a value has the automatic side-effect of setting the bit with the same name to zero." DEFVAL { { } } ::= { usdBgpPeerGroupAddressFamilyEntry 35 }
usdBgpPeerGroupAddressFamilyUnconfiguredAttributes OBJECT-TYPE SYNTAX BITS { usdBgpPeerGroupAddressFamilyDefaultOriginate(0), usdBgpPeerGroupAddressFamilyNextHopSelf(1), usdBgpPeerGroupAddressFamilySendCommunity(2), usdBgpPeerGroupAddressFamilyDistributeListIn(3), usdBgpPeerGroupAddressFamilyDistributeListOut(4), usdBgpPeerGroupAddressFamilyPrefixListIn(5), usdBgpPeerGroupAddressFamilyPrefixListOut(6), usdBgpPeerGroupAddressFamilyPrefixTreeIn(7), usdBgpPeerGroupAddressFamilyPrefixTreeOut(8), usdBgpPeerGroupAddressFamilyFilterListIn(9), usdBgpPeerGroupAddressFamilyFilterListOut(10), usdBgpPeerGroupAddressFamilyFilterListWeight(11), usdBgpPeerGroupAddressFamilyFilterListWeightValue(12), usdBgpPeerGroupAddressFamilyRouteMapIn(13), usdBgpPeerGroupAddressFamilyRouteMapOut(14), usdBgpPeerGroupAddressFamilyRouteReflectorClient(15), usdBgpPeerGroupAddressFamilyRouteLimitWarn(16), usdBgpPeerGroupAddressFamilyRouteLimitReset(17), usdBgpPeerGroupAddressFamilyRouteLimitWarnOnly(18), usdBgpPeerGroupAddressFamilyRemovePrivateAs(19), usdBgpPeerGroupAddressFamilyUnsuppressMap(20), usdBgpPeerGroupAddressFamilyInboundSoftReconfig(21), usdBgpPeerGroupAddressFamilyAsOverride(22), usdBgpPeerGroupAddressFamilyAllowAsIn(23), usdBgpPeerGroupAddressFamilySendExtendedCommunity(24) } MAX-ACCESS read-create STATUS current DESCRIPTION "On get each bit indicates whether the corresponding attribute is configured or unconfigured: 0 = The attribute is configured (i.e. the configured value is the operational value). 1 = The attribute is unconfigured (i.e. the operational value is inherited from the a higher level which could be the default value). Getting the attribute value itself always returns the operational value of that attribute regardless of whether the attribute is configured or unconfigured. On write each bit indicates wheter or not the corresponding attribute should be set to the unconfigured state: 0 = No operation (i.e. do not change the state of the attribute). 1 = Set the attribute to the unconfigured state. Setting an attribute to a value has the automatic side-effect of setting the bit with the same name to zero." DEFVAL { { } } ::= { usdBgpPeerGroupAddressFamilyEntry 35 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.1 | juniBgpPeerGroupAddressFamilyVrfName, usdBgpPeerGroupAddressFamilyVrfName | 0 | 0 | The name of the VPN Routing Forwarding (VRF) instance in which this peer-group is configured. The empty string indicates that t… |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.2 | juniBgpPeerGroupAddressFamilyAfi, usdBgpPeerGroupAddressFamilyAfi | 0 | 0 | The AFI of the address-family in which this peer-group is configured. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.3 | juniBgpPeerGroupAddressFamilySafi, usdBgpPeerGroupAddressFamilySafi | 0 | 0 | The SAFI of the address-family in which this peer-group is configured. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.4 | juniBgpPeerGroupGroupAddressFamilyGroupName, usdBgpPeerGroupGroupAddressFamilyGroupName | 0 | 0 | The name of the Peer group this instance configures. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.5 | juniBgpPeerGroupAddressFamilyDefaultOriginate, usdBgpPeerGroupAddressFamilyDefaultOriginate | 0 | 0 | Set this object to true(1) in order to advertise a default route to this peer, if present. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.6 | juniBgpPeerGroupAddressFamilyNextHopSelf, usdBgpPeerGroupAddressFamilyNextHopSelf | 0 | 0 | Set this object to true(1) in order to always advertise this router as the next hop. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.7 | juniBgpPeerGroupAddressFamilySendCommunity, usdBgpPeerGroupAddressFamilySendCommunity | 0 | 0 | Set this object to true(1) in order to send COMMUNITIES attributes in updates. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.8 | juniBgpPeerGroupAddressFamilyDistributeListIn, usdBgpPeerGroupAddressFamilyDistributeListIn | 0 | 0 | The inbound distribute IP access list name. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.9 | juniBgpPeerGroupAddressFamilyDistributeListOut, usdBgpPeerGroupAddressFamilyDistributeListOut | 0 | 0 | The outbound distribute IP access list name. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.10 | juniBgpPeerGroupAddressFamilyPrefixListIn, usdBgpPeerGroupAddressFamilyPrefixListIn | 0 | 0 | The inbound IP prefix list name. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.11 | juniBgpPeerGroupAddressFamilyPrefixListOut, usdBgpPeerGroupAddressFamilyPrefixListOut | 0 | 0 | The outbound IP prefix list name. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.12 | juniBgpPeerGroupAddressFamilyPrefixTreeIn, usdBgpPeerGroupAddressFamilyPrefixTreeIn | 0 | 0 | The inbound IP prefix tree name. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.13 | juniBgpPeerGroupAddressFamilyPrefixTreeOut, usdBgpPeerGroupAddressFamilyPrefixTreeOut | 0 | 0 | The outbound IP prefix tree name. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.14 | juniBgpPeerGroupAddressFamilyFilterListIn, usdBgpPeerGroupAddressFamilyFilterListIn | 0 | 0 | The inbound filter AS path list name. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.15 | juniBgpPeerGroupAddressFamilyFilterListOut, usdBgpPeerGroupAddressFamilyFilterListOut | 0 | 0 | The outbound filter AS path list name. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.16 | juniBgpPeerGroupAddressFamilyFilterListWeight, usdBgpPeerGroupAddressFamilyFilterListWeight | 0 | 0 | The weight filter AS path list name. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.17 | juniBgpPeerGroupAddressFamilyFilterListWeightValue, usdBgpPeerGroupAddressFamilyFilterListWeightValue | 0 | 0 | The weight to apply on weight filter list matches. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.18 | juniBgpPeerGroupAddressFamilyRouteMapIn, usdBgpPeerGroupAddressFamilyRouteMapIn | 0 | 0 | The inbound route-map name. An empty string means no inbound route-map. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.19 | juniBgpPeerGroupAddressFamilyRouteMapOut, usdBgpPeerGroupAddressFamilyRouteMapOut | 0 | 0 | The outbound route-map name. An empty string means no outbound route-map. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.20 | juniBgpPeerGroupAddressFamilyRouteReflectorClient, usdBgpPeerGroupAddressFamilyRouteReflectorClient | 0 | 0 | The peer is a route reflector client. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.21 | juniBgpPeerGroupAddressFamilyRouteLimitWarn, usdBgpPeerGroupAddressFamilyRouteLimitWarn | 0 | 0 | Log a warning if pathCount exceeds this value. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.22 | juniBgpPeerGroupAddressFamilyRouteLimitReset, usdBgpPeerGroupAddressFamilyRouteLimitReset | 0 | 0 | Reset connection is pathCount exceeds this value. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.23 | juniBgpPeerGroupAddressFamilyRouteLimitWarnOnly, usdBgpPeerGroupAddressFamilyRouteLimitWarnOnly | 0 | 0 | Warn, but do not reset, if the path limit is exceeded. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.24 | juniBgpPeerGroupAddressFamilyRemovePrivateAs, usdBgpPeerGroupAddressFamilyRemovePrivateAs | 0 | 0 | Remove private AS numbers from AS paths. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.25 | juniBgpPeerGroupAddressFamilyUnsuppressMap, usdBgpPeerGroupAddressFamilyUnsuppressMap | 0 | 0 | The unsuppress route-map name. Routes which are sent to this peer and which match this route-map are not subject to suppression… |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.26 | juniBgpPeerGroupAddressFamilyInboundSoftReconfig, usdBgpPeerGroupAddressFamilyInboundSoftReconfig | 0 | 0 | Inbound soft-reconfiguration is enabled. If inbound soft-reconfiguration is enabled we keep a copy of each received route before… |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.27 | juniBgpPeerGroupAddressFamilyResetConnectionType, usdBgpPeerGroupAddressFamilyResetConnectionType | 0 | 0 | Writing a value to this object causes one individual address family within the sessions to all peers in the peer-group to be cle… |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.28 | juniBgpPeerGroupAddressFamilyRowStatus, usdBgpPeerGroupAddressFamilyRowStatus | 0 | 0 | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the fo… |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.29 | juniBgpPeerGroupAddressFamilyAsOverride, usdBgpPeerGroupAddressFamilyAsOverride | 0 | 0 | Replace the AS number of the peer by our own AS number in the AS-path attribute in UPDATEs sent to this peer-group. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.30 | juniBgpPeerGroupAddressFamilyAllowAsIn, usdBgpPeerGroupAddressFamilyAllowAsIn | 0 | 0 | The maximum number of times our own AS number is allowed to occur in a received AS-path before that received route is considered… |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.31 | juniBgpPeerGroupAddressFamilySendExtendedCommunity, usdBgpPeerGroupAddressFamilySendExtendedCommunity | 0 | 0 | Set this object to true(1) in order to send EXTENDED-COMMUNITIES attributes in updates. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.32 | juniBgpPeerGroupAddressFamilyAdvertiseCapPrefixListOrfSend | 0 | 0 | Set this object to true(1) in order to send PREFIX-LIST ORF SEND CAPABILITY in Open Message. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.33 | juniBgpPeerGroupAddressFamilyAdvertiseCapPrefixListCiscoOrfSend | 0 | 0 | Set this object to true(1) in order to send PREFIX-LIST-CISCO ORF SEND CAPABILITY in Open Message. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.34 | juniBgpPeerGroupAddressFamilyMaximumPrefixStrict | 0 | 0 | If the juniBgpPeerGroupAddressFamilyInboundSoftReconfig object is set to true then routes which were rejected by inbound policy … |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.36 | juniBgpPeerGroupAddressFamilySendLabel | 0 | 0 | Send labeled prefixes to this peer for this address-family. |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.37 | juniBgpPeerGroupAddressFamilyDefaultOriginateRouteMap | 0 | 0 | The route-map to apply to the default route which is advertised to this peer-group as a result of setting juniBgpPeerGroupAddress… |
| 1.3.6.1.4.1.4874.2.2.29.1.10.1.38 | juniBgpPeerGroupAddressFamilyNextHopUnchanged | 0 | 0 | Set this object to true(1) in order to always advertise the next-hop unchanged to this peer-group in this address-family. |