The configured speed setting for this ethernet interface. The
operational value is reported in the corresponding Interfaces MIB
ifSpeed object.
NOTE, configuration dependency:
Setting this object to values other than 'autoNegotiate' takes effect
only when the corresponding juniEthernetIfDuplexMode object is
simultaneously set to other than 'autoDuplex'.
Otherwise (i.e. this object is set to 'autoNegotiate', AND/OR the
corresponding juniEthernetIfDuplexMode object is set to 'autoDuplex'),
speed is negotiated.
Parsed from file juniEthernet.mi2.txt
Company: None
Module: Juniper-ETHERNET-MIB
The configured speed setting for this ethernet interface. The
operational value is reported in the corresponding Interfaces MIB
ifSpeed object.
NOTE, configuration dependency:
Setting this object to values other than 'autoNegotiate' takes effect
only when the corresponding juniEthernetIfDuplexMode object is
simultaneously set to other than 'autoDuplex'.
Otherwise (i.e. this object is set to 'autoNegotiate', AND/OR the
corresponding juniEthernetIfDuplexMode object is set to 'autoDuplex'),
speed is negotiated.
Parsed from file Juniper-ETHERNET-MIB.mib
Module: Juniper-ETHERNET-MIB
Vendor: Juniper Networks/Unisphere
Module: Juniper-ETHERNET-MIB
[Automatically extracted from oidview.com]
juniEthernetIfSpeed OBJECT-TYPE SYNTAX INTEGER { autoNegotiate(1), speed10Mbps(2), speed100Mbps(3), speed1000Mbps(4), speed10000Mbps(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "The configured speed setting for this ethernet interface. The operational value is reported in the corresponding Interfaces MIB ifSpeed object. NOTE, configuration dependency: Setting this object to values other than 'autoNegotiate' takes effect only when the corresponding juniEthernetIfDuplexMode object is simultaneously set to other than 'autoDuplex'. Otherwise (i.e. this object is set to 'autoNegotiate', AND/OR the corresponding juniEthernetIfDuplexMode object is set to 'autoDuplex'), speed is negotiated." DEFVAL { autoNegotiate } ::= { juniEthernetIfEntry 3 }
juniEthernetIfSpeed OBJECT-TYPE SYNTAX INTEGER { autoNegotiate(1), speed10Mbps(2), speed100Mbps(3), speed1000Mbps(4), speed10000Mbps(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "The configured speed setting for this ethernet interface. The operational value is reported in the corresponding Interfaces MIB ifSpeed object. NOTE, configuration dependency: Setting this object to values other than 'autoNegotiate' takes effect only when the corresponding juniEthernetIfDuplexMode object is simultaneously set to other than 'autoDuplex'. Otherwise (i.e. this object is set to 'autoNegotiate', AND/OR the corresponding juniEthernetIfDuplexMode object is set to 'autoDuplex'), speed is negotiated." DEFVAL { autoNegotiate } ::= { juniEthernetIfEntry 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.4874.2.2.34.1.1.1.1.1 | juniEthernetIfIndex, usdEthernetIfIndex | 0 | 0 | The ifIndex value of the corresponding ethernet interface. |
1.3.6.1.4.1.4874.2.2.34.1.1.1.1.2 | juniEthernetIfDuplexMode, usdEthernetIfDuplexMode | 0 | 0 | The configured duplex setting for this ethernet interface. The operational value is reported in this table entry's correspondin… |
1.3.6.1.4.1.4874.2.2.34.1.1.1.1.4 | juniEthernetIfMtu, usdEthernetIfMtu | 0 | 0 | The configured maximum transfer unit (MTU) for this ethernet interface. The operational value is reported in the corresponding I… |
1.3.6.1.4.1.4874.2.2.34.1.1.1.1.5 | juniEthernetIfOperDuplexMode, usdEthernetIfOperDuplexMode | 0 | 0 | The current operational duplex mode for this ethernet interface. |
1.3.6.1.4.1.4874.2.2.34.1.1.1.1.6 | juniEthernetIfPrimaryMauType | 0 | 0 | The primary MAU type. |
1.3.6.1.4.1.4874.2.2.34.1.1.1.1.7 | juniEthernetIfSecondaryMauType | 0 | 0 | The secondary MAU type for those ports that support a secondary. |
1.3.6.1.4.1.4874.2.2.34.1.1.1.1.8 | juniEthernetIfPrimaryLength | 0 | 0 | The rated cable length in meters for the primary MAU. If the value is 0, the length is unspecified. |
1.3.6.1.4.1.4874.2.2.34.1.1.1.1.9 | juniEthernetIfSecondaryLength | 0 | 0 | The rated cable length in meters for the secondary MAU for those ports that support a secondary. If the value is 0, the length … |