Specifies transmission enabling.
Parsed from file usDataDs3.mi2.txt
Company: None
Module: Unisphere-Data-DS3-MIB
Specifies transmission enabling.
Parsed from file Unisphere-Data-DS3-MIB.mib
Module: Unisphere-Data-DS3-MIB
Vendor: Juniper Networks/Unisphere
Module: Juniper-DS3-MIB
[Automatically extracted from oidview.com]
usdDsx3MdlTransmit OBJECT-TYPE SYNTAX INTEGER { path(1), idlesignal(2), testsignal(4), none(8) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies transmission enabling." DEFVAL { none } ::= { usdDsx3ConfigEntry 14 }
usdDsx3MdlTransmit OBJECT-TYPE SYNTAX INTEGER { path(1), idlesignal(2), testsignal(4), none(8) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies transmission enabling." DEFVAL { none } ::= { usdDsx3ConfigEntry 14 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.4874.2.2.4.1.1.1.1 | juniDsx3LineLength, usdDsx3LineLength | 0 | 0 | The length of the DS3/E3 line in meters. This objects provides information for line build out circuitry. This object is only u… |
1.3.6.1.4.1.4874.2.2.4.1.1.1.2 | juniDsx3LineType, usdDsx3LineType | 0 | 0 | This variable indicates the variety of DS3 C-bit or E3 application implementing this interface. The type of interface affects t… |
1.3.6.1.4.1.4874.2.2.4.1.1.1.3 | juniDsx3CellScramblerConfig, usdDsx3CellScramblerConfig | 0 | 0 | This variable indicates the state of the ATM cell scrambler for interfaces which support ATM over DS3 or E3. For interfaces whi… |
1.3.6.1.4.1.4874.2.2.4.1.1.1.4 | juniDsx3Channelization, usdDsx3Channelization | 0 | 0 | The channelization setting for this DS3 interface; true(1) indicates channelization, false(2) indicates no channelization. |
1.3.6.1.4.1.4874.2.2.4.1.1.1.5 | juniDsx3InterfaceType, usdDsx3InterfaceType | 0 | 0 | The DS3 interface type setting. |
1.3.6.1.4.1.4874.2.2.4.1.1.1.6 | juniDsx3Application, usdDsx3Application | 0 | 0 | The interface application setting. |
1.3.6.1.4.1.4874.2.2.4.1.1.1.7 | juniDsx3Ds3Channel, usdDsx3Ds3Channel | 0 | 0 | The DS3 channel setting. The range of channel settings depends on the line rate of the underlying interface. |
1.3.6.1.4.1.4874.2.2.4.1.1.1.8 | juniDsx3LowerIfIndex, usdDsx3LowerIfIndex | 0 | 0 | The ifIndex of the interface over which this DS3 interface is to be layered. A value of zero indicates no layering. An impleme… |
1.3.6.1.4.1.4874.2.2.4.1.1.1.9 | juniDsx3RowStatus, usdDsx3RowStatus | 0 | 0 | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support settin… |
1.3.6.1.4.1.4874.2.2.4.1.1.1.10 | juniDsx3Ds3DsuMode, usdDsx3Ds3DsuMode | 0 | 0 | The DSU configuration setting for this entry. |
1.3.6.1.4.1.4874.2.2.4.1.1.1.11 | juniDsx3Ds3BandwidthLimit, usdDsx3Ds3BandwidthLimit | 0 | 0 | The DSU bandwidth configuration for this entry. |
1.3.6.1.4.1.4874.2.2.4.1.1.1.12 | juniDsx3Ds3DsuScrambleMode, usdDsx3Ds3DsuScrambleMode | 0 | 0 | The DSU scramble mode setting for this entry. |
1.3.6.1.4.1.4874.2.2.4.1.1.1.13 | juniDsx3MdlCarrier, usdDsx3MdlCarrier | 0 | 0 | Specifies the interface is used in carrier environment. |
1.3.6.1.4.1.4874.2.2.4.1.1.1.15 | juniDsx3MdlEic, usdDsx3MdlEic | 0 | 0 | This is the equipment identification code. |
1.3.6.1.4.1.4874.2.2.4.1.1.1.16 | juniDsx3MdlLic, usdDsx3MdlLic | 0 | 0 | This is the location identification code. |
1.3.6.1.4.1.4874.2.2.4.1.1.1.17 | juniDsx3MdlFic, usdDsx3MdlFic | 0 | 0 | This is the frame identification code. |
1.3.6.1.4.1.4874.2.2.4.1.1.1.18 | juniDsx3MdlUnit, usdDsx3MdlUnit | 0 | 0 | This is the unit identification code. |
1.3.6.1.4.1.4874.2.2.4.1.1.1.19 | juniDsx3MdlPfi, usdDsx3MdlPfi | 0 | 0 | This is the facility identification code to send in the MDL path message. |
1.3.6.1.4.1.4874.2.2.4.1.1.1.20 | juniDsx3MdlPort, usdDsx3MdlPort | 0 | 0 | This is the equipment port number to send in the MDL idle signal message. |
1.3.6.1.4.1.4874.2.2.4.1.1.1.21 | juniDsx3MdlGenerator, usdDsx3MdlGenerator | 0 | 0 | This is the generator number to send in the MDL test signal message. |