Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create/delete an entry in this table, the following entry objects
MUST be explicitly configured:
juniAtmOamF4FlowEndToEndRowStatus
F4 OAM end loopback and CC tests are mutually exclusive, enabling one
will disable the other automatically. So, it is not allowed either at
the circuit creation time or after the circuit creation to issue a
request to enable end-to-end loopback and CC tests simultaneouly.
Enabling/disabling CC sink and source is one time operation. To
re-enable either CC source and sink in way different to earlier, both
has to be disabled from the previous.
Parsed from file juniAtm.mi2.txt
Company: None
Module: Juniper-UNI-ATM-MIB
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create/delete an entry in this table, the following entry objects
MUST be explicitly configured:
juniAtmOamF4FlowEndToEndRowStatus
F4 OAM end loopback and CC tests are mutually exclusive, enabling one
will disable the other automatically. So, it is not allowed either at
the circuit creation time or after the circuit creation to issue a
request to enable end-to-end loopback and CC tests simultaneouly.
Enabling/disabling CC sink and source is one time operation. To
re-enable either CC source and sink in way different to earlier, both
has to be disabled from the previous.
Parsed from file Juniper-UNI-ATM-MIB.mib
Module: Juniper-UNI-ATM-MIB
Vendor: Juniper Networks/Unisphere
Module: Juniper-UNI-ATM-MIB
[Automatically extracted from oidview.com]
juniAtmOamF4FlowEndToEndRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create/delete an entry in this table, the following entry objects MUST be explicitly configured: juniAtmOamF4FlowEndToEndRowStatus F4 OAM end loopback and CC tests are mutually exclusive, enabling one will disable the other automatically. So, it is not allowed either at the circuit creation time or after the circuit creation to issue a request to enable end-to-end loopback and CC tests simultaneouly. Enabling/disabling CC sink and source is one time operation. To re-enable either CC source and sink in way different to earlier, both has to be disabled from the previous." ::= { juniAtmOamF4FlowEndToEndCfgEntry 6 }
juniAtmOamF4FlowEndToEndRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create/delete an entry in this table, the following entry objects MUST be explicitly configured: juniAtmOamF4FlowEndToEndRowStatus F4 OAM end loopback and CC tests are mutually exclusive, enabling one will disable the other automatically. So, it is not allowed either at the circuit creation time or after the circuit creation to issue a request to enable end-to-end loopback and CC tests simultaneouly. Enabling/disabling CC sink and source is one time operation. To re-enable either CC source and sink in way different to earlier, both has to be disabled from the previous." ::= { juniAtmOamF4FlowEndToEndCfgEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.8.1.1.8.1.1 | juniAtmOamF4FlowEndToEndIfIndex | 0 | 0 | The ifIndex of the ATM interface to configure the F4 OAM end-to-end flow. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.8.1.2 | juniAtmOamF4FlowEndToEndVpi | 0 | 0 | Select the VPI for F4 OAM end-to-end flow configuration. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.8.1.3 | juniAtmOamF4FlowEndToEndLoopbackTimer | 0 | 0 | Configure the timer for sending the F4 flow end-to-end loopback OAM cells. Setting this value will enable sending the F4 end cel… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.8.1.4 | juniAtmOamF4FlowEndToEndCCSink | 0 | 0 | Enable/Disable F4 flow end-to-end continuity check sink end point for this VP. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.8.1.5 | juniAtmOamF4FlowEndToEndCCSource | 0 | 0 | Enable/Disable F4 flow end-to-end continuity check source end point for this VP. |