myOspfIftype
View at oid-info.com
The OSPF interface type.
By way of a default, this field may be intuited
from the corresponding value of ifType. Broad-
cast LANs, such as Ethernet and IEEE 802.5,
take the value 'broadcast', X.25 and similar
technologies take the value 'nbma', and links
that are definitively point to point take the
value 'pointToPoint'.
Parsed from file MY-OSPF-MIB.mib.txt
Company: ruijie
Module: MY-OSPF-MIB
Vendor: Ruijie Networks
Module: MY-OSPF-MIB (MY-OSPF-MIB.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
myOspfIfType OBJECT-TYPE SYNTAX INTEGER { broadcast (1), nbma (2), pointToPoint (3), pointToMultipoint (5), loopback(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25 and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'." ::= { myOspfIfEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.1 | myOspfIfIpAddress | 0 | 0 | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.2 | myOspfAddressLessIf | 0 | 0 | For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on int… |
| 1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.3 | myOspfIfAreaId | 0 | 0 | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backb… |
| 1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.5 | myOspfIfAdminStat | 0 | 0 | The OSPF interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an i… |
| 1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.6 | myOspfIfRtrPriority | 0 | 0 | The priority of this interface. Used in multi-access networks, this field is used in the designated router election alg… |
| 1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.7 | myOspfIfTransitDelay | 0 | 0 | myOspfIftransitDelay |
| 1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.8 | myOspfIfRetransInterval | 0 | 0 | The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. Th… |
| 1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.9 | myOspfIfHelloInterval | 0 | 0 | The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the s… |
| 1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.10 | myOspfIfRtrDeadInterval | 0 | 0 | The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. Thi… |
| 1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.11 | myOspfIfPollInterval | 0 | 0 | The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor. |
| 1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.12 | myOspfIfState | 0 | 0 | The OSPF Interface State. |
| 1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.13 | myOspfIfDesignatedRouter | 0 | 0 | The IP Address of the interface which connected the local router in the Designated Router. |
| 1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.14 | myOspfIfBackupDesignatedRouter | 0 | 0 | The IP Address of the interface which connected the local router in the Backup Designated Router. |
| 1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.15 | myOspfIfEvents | 0 | 0 | The number of times this OSPF interface has changed its state, or an error has occurred. |
| 1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.16 | myOspfIfAuthKey | 0 | 0 | The Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, t… |
| 1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.17 | myOspfIfStatus | 0 | 0 | This value will be active(1) always. |
| 1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.18 | myOspfIfMulticastForwarding | 0 | 0 | The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as d… |
| 1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.19 | myOspfIfDemand | 0 | 0 | Indicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) s… |
| 1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.20 | myOspfIfAuthType | 0 | 0 | myOspfIfAuthtype |
| 1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.21 | myOspfIfDatabaseFilterAllOut | 0 | 0 | Block flooding of OSPF LSA packets to the interface. By default, OSPF floods new LSAs over all interfaces in the same area, excep… |
| 1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.22 | myOspfIfDesignateRouterId | 0 | 0 | DR RouterID of this interface, when DR does not selected,DR Id is 0.0.0.0 |
| 1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.23 | myOspfIfBackupDesignateRouterId | 0 | 0 | Backup DR RouterId of this interface , when Backup DR does not selected,BDR Id is 0.0.0.0 |
| 1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.24 | myOspfIfWaitInternal | 0 | 0 | The wait time of hello generate |
| 1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.25 | myOspfIfPassiveStatus | 0 | 0 | Setting this object value to 'enabled' ,the interface will become a passive interface. |
| 1.3.6.1.4.1.4881.1.1.10.2.30.1.4.1.26 | myOspfIfCurrentUsedMd5AuthKeyId | 0 | 0 | key-id which current used for md5 authentication,this value is valid from 1 to 255, the value 0 is default value.. |