The slot number of this module.
Parsed from file isd_mib.txt
Company: a3com
Module: CHIPCOMMIB
Vendor: 3Com
Module: CHIPCOMMIB (isd_mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
oc62nnMQFRModSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slot number of this module." ::= { oc62nnMQFRModEntry 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.49.2.3.1.4.4.129.6.1.2 | oc62nnMQFRModSubSlotIndex | 0 | 0 | The subslot number of this module. |
1.3.6.1.4.1.49.2.3.1.4.4.129.6.1.3 | oc62nnMQFRModBootVersion | 0 | 0 | The software version of the boot code running on this module. |
1.3.6.1.4.1.49.2.3.1.4.4.129.6.1.4 | oc62nnMQFRModDipNVRam | 0 | 0 | The Non-Volatile RAM dip switch setting for this module. Setting the dip switch to enable(1) will cause the module to be configur… |
1.3.6.1.4.1.49.2.3.1.4.4.129.6.1.5 | oc62nnMQFRModDipRingSpeed | 0 | 0 | The dip switch setting for the ring's bandwidth. The speed is in units of megabits per second. |
1.3.6.1.4.1.49.2.3.1.4.4.129.6.1.6 | oc62nnMQFRModJA1Status | 0 | 0 | The status of the first Jitter Attenuator Daughter Card. |
1.3.6.1.4.1.49.2.3.1.4.4.129.6.1.7 | oc62nnMQFRModJA2Status | 0 | 0 | The status of the second Jitter Attenuator Daughter Card. |
1.3.6.1.4.1.49.2.3.1.4.4.129.6.1.10 | oc62nnMQFRModRecoveryAsic1 | 0 | 0 | A 6 octet address used by the first recovery ASIC on this module. |
1.3.6.1.4.1.49.2.3.1.4.4.129.6.1.11 | oc62nnMQFRModRecoveryAsic2 | 0 | 0 | A 6 octet address used by the second recovery ASIC on this module. |
1.3.6.1.4.1.49.2.3.1.4.4.129.6.1.12 | oc62nnMQFRModBcnThres | 0 | 0 | This object specifies a threshold used in beacon recovery. It is the number of times a port disabled by the beaconing algorithm i… |
1.3.6.1.4.1.49.2.3.1.4.4.129.6.1.13 | oc62nnMQFRModAsicType | 0 | 0 | This object specifies the type of switching asic on the module. |