Indicates whether the trunk is connected to a
segment that will perform beacon recovery. This
should be set to exists(1) for trunks which connect
to hubs which perform beacon recovery. This attribute
is used to determine the fault domain when resolving a
beaconing condition.
The beacon recovery process will resolve beaconing on
trunks with this attribute set to nonExists(2) before
trunks with the attribute set to exists(1) are resolved.
For backplane trunks, setting to a value other than
notApplicable will return invalidData error. The
default value is nonExists(2).
Parsed from file isd_mib.txt
Company: None
Module: CHIPCOMMIB
Indicates whether the trunk is connected to a
segment that will perform beacon recovery. This
should be set to exists(1) for trunks which connect
to hubs which perform beacon recovery. This attribute
is used to determine the fault domain when resolving a
beaconing condition.
The beacon recovery process will resolve beaconing on
trunks with this attribute set to nonExists(2) before
trunks with the attribute set to exists(1) are resolved.
For backplane trunks, setting to a value other than
notApplicable will return invalidData error. The
default value is nonExists(2).
Parsed from file CHIPCOMMIB.mib
Module: CHIPCOMMIB
Vendor: Chippcom
Module: CHIPCOMMIB
[Automatically extracted from oidview.com]
ol5208MTPTrunkExtBcnRecovery OBJECT-TYPE SYNTAX INTEGER { exists(1), nonExists(2), notApplicable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the trunk is connected to a segment that will perform beacon recovery. This should be set to exists(1) for trunks which connect to hubs which perform beacon recovery. This attribute is used to determine the fault domain when resolving a beaconing condition. The beacon recovery process will resolve beaconing on trunks with this attribute set to nonExists(2) before trunks with the attribute set to exists(1) are resolved. For backplane trunks, setting to a value other than notApplicable will return invalidData error. The default value is nonExists(2)." ::= { ol5208MTPTrunkEntry 7 }
ol5208MTPTrunkExtBcnRecovery OBJECT-TYPE SYNTAX INTEGER { exists(1), nonExists(2), notApplicable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the trunk is connected to a segment that will perform beacon recovery. This should be set to exists(1) for trunks which connect to hubs which perform beacon recovery. This attribute is used to determine the fault domain when resolving a beaconing condition. The beacon recovery process will resolve beaconing on trunks with this attribute set to nonExists(2) before trunks with the attribute set to exists(1) are resolved. For backplane trunks, setting to a value other than notApplicable will return invalidData error. The default value is nonExists(2)." ::= { ol5208MTPTrunkEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.1 | ol5208MTPTrunkSlotIndex | 0 | 0 | A unique value that identifies a particular module. Its value ranges between 1 and olModSlotNumber. The module identified by a … |
| 1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.2 | ol5208MTPTrunkIndex | 0 | 0 | The trunk number for this trunk. |
| 1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.3 | ol5208MTPTrunkDipAdminState | 0 | 0 | The state of this trunk as indicated by the trunk's dip switches. |
| 1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.4 | ol5208MTPTrunkCableMon | 0 | 0 | The cable monitor configuration for this trunk. |
| 1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.5 | ol5208MTPTrunkDipCableMon | 0 | 0 | The cable monitor configuration as indicated by this trunk's dip switches. |
| 1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.6 | ol5208MTPTrunkNetMapState | 0 | 0 | The map state of the copper ring-in trunk. This should be set to external for ring-in trunks which connect to external hubs. Th… |