This object specifies a threshold used for speed detection.
It is the number of times a port disabled due to detection
of a wrong ring speed is allowed to be
automatically re-enabled. After the threshold has been
met, the user must manually disable and then
re-enable the port to resume normal operation of the
port.
Parsed from file isd_mib.txt
Company: a3com
Module: CHIPCOMMIB
Vendor: 3Com
Module: CHIPCOMMIB (isd_mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
(
0..255 )
Automatically extracted from www.mibdepot.com
oc62nnMTPModSpeedThres OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies a threshold used for speed detection. It is the number of times a port disabled due to detection of a wrong ring speed is allowed to be automatically re-enabled. After the threshold has been met, the user must manually disable and then re-enable the port to resume normal operation of the port." ::= { oc62nnMTPModEntry 10 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.49.2.3.1.4.4.36.6.1.1 | oc62nnMTPModSlotIndex | 0 | 0 | The slot number of this module. |
1.3.6.1.4.1.49.2.3.1.4.4.36.6.1.2 | oc62nnMTPModSubSlotIndex | 0 | 0 | The subslot number of this module. |
1.3.6.1.4.1.49.2.3.1.4.4.36.6.1.3 | oc62nnMTPModBootVersion | 0 | 0 | The software version of the boot code running on this module. |
1.3.6.1.4.1.49.2.3.1.4.4.36.6.1.4 | oc62nnMTPModDipNVRam | 0 | 0 | The Non-Volatile RAM dip switch setting for this module. Setting the dip switch to enable(1) will cause the module to be configur… |
1.3.6.1.4.1.49.2.3.1.4.4.36.6.1.5 | oc62nnMTPModDipNetwork | 0 | 0 | The network indicated by the module's dip switches. |
1.3.6.1.4.1.49.2.3.1.4.4.36.6.1.6 | oc62nnMTPModDipRingSpeed | 0 | 0 | The dip switch setting for the ring's bandwidth. The speed is in units of megabits per second. |
1.3.6.1.4.1.49.2.3.1.4.4.36.6.1.7 | oc62nnMTPModRecoveryAsic1 | 0 | 0 | A 6 octet address used by the first recovery ASIC on this module. |
1.3.6.1.4.1.49.2.3.1.4.4.36.6.1.8 | oc62nnMTPModRecoveryAsic2 | 0 | 0 | A 6 octet address used by the second recovery ASIC on this module. |
1.3.6.1.4.1.49.2.3.1.4.4.36.6.1.9 | oc62nnMTPModBcnThres | 0 | 0 | This object specifies a threshold used in beacon recovery. It is the number of times a port disabled by the beaconing algorithm i… |