The desired IEEE 802.5 statistics mode of this card.
When this attribute is set to enabled, the card will
gather IEEE 802.5 statistics. Note that when this
attribute is enabled, the accuracy of all statistics
may be impaired during peak loads.
Parsed from file isd_mib.txt
Company: a3com
Module: CHIPCOMMIB
Vendor: 3Com
Module: CHIPCOMMIB (isd_mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
oc62nnDMGTModDot5StatsMode OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired IEEE 802.5 statistics mode of this card. When this attribute is set to enabled, the card will gather IEEE 802.5 statistics. Note that when this attribute is enabled, the accuracy of all statistics may be impaired during peak loads." ::= { oc62nnDMGTModEntry 20 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.1 | oc62nnDMGTModSlotIndex | 0 | 0 | The slot number of this card. |
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.2 | oc62nnDMGTModSubSlotIndex | 0 | 0 | The subslot number of this card. |
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.3 | oc62nnDMGTModBootVersion | 0 | 0 | The software boot eprom version of this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.4 | oc62nnDMGTModIpAddress | 0 | 0 | The current IP address of this card and the associated interface. |
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.5 | oc62nnDMGTModSubnetMask | 0 | 0 | The current subnet mask of this card and the associated interface. |
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.6 | oc62nnDMGTModDefaultGateway | 0 | 0 | The current default gateway of this card and the associated interface. Note that a value of 0.0.0.0 indicates that this interfac… |
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.7 | oc62nnDMGTModStationAddr | 0 | 0 | A 6 octet address that uniquely identifies this card. This corresponds to the MAC address burned-in during manufacture of this mo… |
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.8 | oc62nnDMGTModInterfaceMode | 0 | 0 | The desired connectivity mode of this card. When this attribute is set to enabled(1) and the card is set to a network, it will f… |
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.9 | oc62nnDMGTModTRAdapterStatus | 0 | 0 | The status of the Token Ring Adapter for this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.10 | oc62nnDMGTModTRMacAddrType | 0 | 0 | The desired MAC address in use for this agent. burned-in(1) indicates that the factory setting as defined in oc62nnDMGTStationAdd… |
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.11 | oc62nnDMGTModTRLocAdminAddr | 0 | 0 | A MAC address with the locally administered bit set to one. Setting this value to an invalid address will return invalidData erro… |
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.12 | oc62nnDMGTModTRChipFlashVer | 0 | 0 | The version number of the microcode loaded into the module's IBM Token Ring MAC Chip Flash. |
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.13 | oc62nnDMGTModTRChipBufStatus | 0 | 0 | Indicates whether the IBM Token Ring MAC Chip buffer is ok or full. If the buffer is full, the module will stop collecting stati… |
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.14 | oc62nnDMGTModTREarlyTokenRel | 0 | 0 | Indicates whether Early Token Release is enabled for this module's TR adapter. Early Token Release (ETR) is a function which all… |
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.15 | oc62nnDMGTModTRMonitorConten | 0 | 0 | Indicates whether this module's TR adapter will participate in Active Monitor Contention. |
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.16 | oc62nnDMGTModTRInternalWrap | 0 | 0 | Indicates whether this module's TR adapter will perform an Internal Wrap Test, which wraps data internal to the MPC (MAC Wrap). |
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.17 | oc62nnDMGTModTRExternalWrap | 0 | 0 | Indicates whether this module's TR adapter will perform an External Wrap Test. This test performs a lobe wrap out to the cable, b… |
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.18 | oc62nnDMGTModIfIndex | 0 | 0 | The interface number associated with this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.19 | oc62nnDMGTModRMONStatsMode | 0 | 0 | The desired state of the TRMAC RMON probe. When this attribute is set to enabled the RMON probe will be enabled and RMON statist… |
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.21 | oc62nnDMGTModRMONHostStatsMode | 0 | 0 | The desired RMON host table statistics mode of this card. When this attribute is set to enabled, the card will gather RMON host t… |
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.22 | oc62nnDMGTModRMONRingStationStatsMode | 0 | 0 | The desired RMON ring station table statistics mode of this card. When this attribute is set to enabled, the card will gather RMO… |
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.23 | oc62nnDMGTModRMONMLStatsMode | 0 | 0 | The desired RMON mac-layer table statistics mode of this card. When this attribute is set to enabled, the card will gather RMON m… |
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.24 | oc62nnDMGTModRMONPStatsMode | 0 | 0 | The desired RMON promiscuous table statistics mode of this card. When this attribute is set to enabled, the card will gather RMON… |
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.25 | oc62nnDMGTModRMONSrcRoutingStatsMode | 0 | 0 | The desired RMON source routing table statistics mode of this card. When this attribute is set to enabled, the card will gather R… |
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.26 | oc62nnDMGTModRMONSurrogateStatsMode | 0 | 0 | The desired state of the TRMAC Surrogate probe. When this attribute is set to enabled the Surrogate probe will be enabled and RE… |
| 1.3.6.1.4.1.49.2.3.1.4.4.44.6.1.27 | oc62nnDMGTModARPResolveMethod | 0 | 0 | The desired ARP broadcast type for this card. When this attribute is set to source-route(1), all ARP requests will contain the Ro… |