This object specifies a threshold used for speed detection.
It is the number of times a port disabled due to detection
of a wrong ring speed is allowed to be
automatically re-enabled. After the threshold has been
met, the user must manually disable and then
re-enable the port to resume normal operation of the
port.
Parsed from file isd_mib.txt
Company: a3com
Module: CHIPCOMMIB
Vendor: 3Com
Module: CHIPCOMMIB (isd_mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
(
0..255 )
Automatically extracted from www.mibdepot.com
ol42nnEHModSpeedThresh OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies a threshold used for speed detection. It is the number of times a port disabled due to detection of a wrong ring speed is allowed to be automatically re-enabled. After the threshold has been met, the user must manually disable and then re-enable the port to resume normal operation of the port." ::= { ol42nnEHModEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.49.2.3.1.4.4.70.1.1.1 | ol42nnEHModSlotIndex | 0 | 0 | A unique value that identifies a particular module. Its value ranges between 1 and olModSlotNumber. The module identified by a … |
| 1.3.6.1.4.1.49.2.3.1.4.4.70.1.1.2 | ol42nnEHModHubId | 0 | 0 | Reading this value returns the same value as ol42nnEHModSlotIndex. Writing this value causes the module to be assigned a new Hub… |
| 1.3.6.1.4.1.49.2.3.1.4.4.70.1.1.3 | ol42nnEHModSerialNo | 0 | 0 | The serial number of this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.70.1.1.4 | ol42nnEHModRingSpeed | 0 | 0 | The ring's bandwidth. When olModNetwork for this module is not isolated(2), setting this value to a different ring speed will re… |
| 1.3.6.1.4.1.49.2.3.1.4.4.70.1.1.5 | ol42nnEHModBcnRecovery | 0 | 0 | When beacon recovery is enabled, the module will automatically recover from beaconing conditions by removing the beaconing statio… |
| 1.3.6.1.4.1.49.2.3.1.4.4.70.1.1.6 | ol42nnEHModRecoveryAsic1 | 0 | 0 | A 6 octet address used by the first recovery ASIC on this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.70.1.1.7 | ol42nnEHModRecoveryAsic2 | 0 | 0 | A 6 octet address used by the second recovery ASIC on this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.70.1.1.8 | ol42nnEHModBcnThresh | 0 | 0 | This object specifies a threshold used in beacon recovery. It is the number of times a port disabled by the beaconing algorithm i… |
| 1.3.6.1.4.1.49.2.3.1.4.4.70.1.1.10 | ol42nnEHModTRMediaType | 0 | 0 | The type this module's token ring media circuitry. |
| 1.3.6.1.4.1.49.2.3.1.4.4.70.1.1.11 | ol42nnEHModFanStatus | 0 | 0 | The status of the fan in this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.70.1.1.12 | ol42nnEHModTempStatus | 0 | 0 | The temperature status for this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.70.1.1.13 | ol42nnEHModBootVersion | 0 | 0 | The software version of the boot code running on this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.70.1.1.14 | ol42nnEHModPICStatus | 0 | 0 | The current status of this module's power interface controller board (PIC). |
| 1.3.6.1.4.1.49.2.3.1.4.4.70.1.1.15 | ol42nnEHModPrimePowerStatus | 0 | 0 | The current status of this module's primary power supply. |
| 1.3.6.1.4.1.49.2.3.1.4.4.70.1.1.16 | ol42nnEHModBackupPowerStatus | 0 | 0 | The current status of this module's backup power supply. The status will be not-installed(4) when ol42nnEHModPICStatus is not-ins… |
| 1.3.6.1.4.1.49.2.3.1.4.4.70.1.1.17 | ol42nnEHModFan2Status | 0 | 0 | The status of fan2 in this module. |