A list of module information for each 4201M-DEK
module in the concentrator.
Parsed from file isd_mib.txt
Company: a3com
Module: CHIPCOMMIB
Vendor: 3Com
Module: CHIPCOMMIB (isd_mib)
Type: ENTRY
Access: not-accessible
Syntax: Ol4201MDEKModEntry
Automatically extracted from www.mibdepot.com
ol4201MDEKModEntry OBJECT-TYPE SYNTAX Ol4201MDEKModEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of module information for each 4201M-DEK module in the concentrator." INDEX {ol4201MDEKModSlotIndex} ::= {ol4201MDEKModTable 1}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.49.2.3.1.4.4.98.1.1.1 | ol4201MDEKModSlotIndex | 0 | 0 | A unique value that identifies a particular module. Its value ranges between 1 and olModSlotNumber. The module identified by a … |
1.3.6.1.4.1.49.2.3.1.4.4.98.1.1.2 | ol4201MDEKModHubId | 0 | 0 | Reading this value returns the same value as ol4201MDEKModSlotIndex. Writing this value causes the module to be assigned a new H… |
1.3.6.1.4.1.49.2.3.1.4.4.98.1.1.3 | ol4201MDEKModSerialNo | 0 | 0 | The serial number of this module. |
1.3.6.1.4.1.49.2.3.1.4.4.98.1.1.4 | ol4201MDEKModEngType | 0 | 0 | A unique identifier for the Enigne module installed in the carrier. |
1.3.6.1.4.1.49.2.3.1.4.4.98.1.1.5 | ol4201MDEKModEngModel | 0 | 0 | The model number of the engine installed. |
1.3.6.1.4.1.49.2.3.1.4.4.98.1.1.6 | ol4201MDEKModEngDescription | 0 | 0 | The description of the engine installed. |
1.3.6.1.4.1.49.2.3.1.4.4.98.1.1.7 | ol4201MDEKModBootVersion | 0 | 0 | The version of the carrier module boot software. |
1.3.6.1.4.1.49.2.3.1.4.4.98.1.1.8 | ol4201MDEKModEngVersion | 0 | 0 | The version of the Enigne's application software. |
1.3.6.1.4.1.49.2.3.1.4.4.98.1.1.9 | ol4201MDEKModEngBootVersion | 0 | 0 | The version of the Engine's boot software. |
1.3.6.1.4.1.49.2.3.1.4.4.98.1.1.10 | ol4201MDEKModCapabilities | 0 | 0 | The operational capabilities for this module as specified by the Engine at initialization. |
1.3.6.1.4.1.49.2.3.1.4.4.98.1.1.11 | ol4201MDEKModPortCount | 0 | 0 | The number of front panel ports on the Enigne module. |
1.3.6.1.4.1.49.2.3.1.4.4.98.1.1.12 | ol4201MDEKModEngDefaultGateway | 0 | 0 | The IP default gateway for Third Party engine. |
1.3.6.1.4.1.49.2.3.1.4.4.98.1.1.13 | ol4201MDEKModEngMboxVersion | 0 | 0 | The Eng mailbox specification version that Third Party engine supports. |
1.3.6.1.4.1.49.2.3.1.4.4.98.1.1.14 | ol4201MDEKModEngStatus | 0 | 0 | The Carrier/Engine communication status for Third Party engine. |
1.3.6.1.4.1.49.2.3.1.4.4.98.1.1.15 | ol4201MDEKModRingSpeed | 0 | 0 | The ring's bandwidth. When olModNetwork for this module is not isolated(2), setting this value to a different ring speed will re… |
1.3.6.1.4.1.49.2.3.1.4.4.98.1.1.16 | ol4201MDEKModBcnRecovery | 0 | 0 | When beacon recovery is enabled, the module will automatically recover from beaconing conditions by removing the beaconing statio… |
1.3.6.1.4.1.49.2.3.1.4.4.98.1.1.17 | ol4201MDEKModRecoveryAsic1 | 0 | 0 | A 6 octet address used by the first recovery ASIC on this module. |
1.3.6.1.4.1.49.2.3.1.4.4.98.1.1.18 | ol4201MDEKModRecoveryAsic2 | 0 | 0 | A 6 octet address used by the second recovery ASIC on this module. |
1.3.6.1.4.1.49.2.3.1.4.4.98.1.1.19 | ol4201MDEKModBcnThresh | 0 | 0 | This object specifies a threshold used in beacon recovery. It is the number of times a port disabled by the beaconing algorithm i… |
1.3.6.1.4.1.49.2.3.1.4.4.98.1.1.20 | ol4201MDEKModFan1Status | 0 | 0 | The status of the fan in this module. |
1.3.6.1.4.1.49.2.3.1.4.4.98.1.1.21 | ol4201MDEKModFan2Status | 0 | 0 | The status of the fan in this module. |
1.3.6.1.4.1.49.2.3.1.4.4.98.1.1.22 | ol4201MDEKModTempStatus | 0 | 0 | The temperature status for this module. |
1.3.6.1.4.1.49.2.3.1.4.4.98.1.1.23 | ol4201MDEKModPICStatus | 0 | 0 | The current status of this hub's power interface controller board (PIC). |
1.3.6.1.4.1.49.2.3.1.4.4.98.1.1.24 | ol4201MDEKModPrimePowerStatus | 0 | 0 | The current status of this hub's primary power supply. |
1.3.6.1.4.1.49.2.3.1.4.4.98.1.1.25 | ol4201MDEKModBackupPowerStatus | 0 | 0 | The current status of this hub's backup power supply. If this module does not have a PIC (power interface controller), the statu… |