Setting this object to selfTest(2) causes the
repeater to perform a agent-specific, non-
disruptive self-test that has the following
characteristics: a) The nature of the tests is
not specified. b) The test does not change the
state of the repeater or management information
about the repeater. c) The test does not inject
packets onto any segment. d) The test does not
prevent the relay of any packets. e) The test
does not interfere with management functions.
After performing this test the agent will update
the repeater health information and send a
chipRptrHealth trap.
Setting this object to noSelfTest(1) has no
effect. The agent will always return the value
noSelfTest(1) when this object is read.
Parsed from file isd_mib.txt
Company: None
Module: CHIPCOMMIB
Setting this object to selfTest(2) causes the
repeater to perform a agent-specific, non-
disruptive self-test that has the following
characteristics: a) The nature of the tests is
not specified. b) The test does not change the
state of the repeater or management information
about the repeater. c) The test does not inject
packets onto any segment. d) The test does not
prevent the relay of any packets. e) The test
does not interfere with management functions.
After performing this test the agent will update
the repeater health information and send a
chipRptrHealth trap.
Setting this object to noSelfTest(1) has no
effect. The agent will always return the value
noSelfTest(1) when this object is read.
Parsed from file CHIPCOMMIB.mib
Module: CHIPCOMMIB
Vendor: Chippcom
Module: CHIPCOMMIB
[Automatically extracted from oidview.com]
chipRptrNonDisruptTest OBJECT-TYPE SYNTAX INTEGER { noSelfTest(1), selfTest(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to selfTest(2) causes the repeater to perform a agent-specific, non- disruptive self-test that has the following characteristics: a) The nature of the tests is not specified. b) The test does not change the state of the repeater or management information about the repeater. c) The test does not inject packets onto any segment. d) The test does not prevent the relay of any packets. e) The test does not interfere with management functions. After performing this test the agent will update the repeater health information and send a chipRptrHealth trap. Setting this object to noSelfTest(1) has no effect. The agent will always return the value noSelfTest(1) when this object is read." REFERENCE "Reference IEEE 802.3 Rptr Mgt, 19.2.3.3, acExecuteNonDisruptiveSelfTest." ::= { chipRptrRptrInfoEntry 7 }
chipRptrNonDisruptTest OBJECT-TYPE SYNTAX INTEGER { noSelfTest(1), selfTest(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to selfTest(2) causes the repeater to perform a agent-specific, non- disruptive self-test that has the following characteristics: a) The nature of the tests is not specified. b) The test does not change the state of the repeater or management information about the repeater. c) The test does not inject packets onto any segment. d) The test does not prevent the relay of any packets. e) The test does not interfere with management functions. After performing this test the agent will update the repeater health information and send a chipRptrHealth trap. Setting this object to noSelfTest(1) has no effect. The agent will always return the value noSelfTest(1) when this object is read." REFERENCE "Reference IEEE 802.3 Rptr Mgt, 19.2.3.3, acExecuteNonDisruptiveSelfTest." ::= { chipRptrRptrInfoEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.49.2.3.1.5.2.5.1.1.1.1.1 | chipRptrRptrInfoSlotIndex | 0 | 0 | The slot number of the repeater module on which the isolated network identified by chipRptrRptrInfoNetID resides. If chipRptrRptr… |
1.3.6.1.4.1.49.2.3.1.5.2.5.1.1.1.1.2 | chipRptrRptrInfoNetID | 0 | 0 | The network index that uniquely identifies this repeater. |
1.3.6.1.4.1.49.2.3.1.5.2.5.1.1.1.1.3 | chipRptrGroupCapacity | 0 | 0 | The chipRptrGroupCapacity is the number of groups that can be contained within the repeater. Within each managed repeater, the g… |
1.3.6.1.4.1.49.2.3.1.5.2.5.1.1.1.1.4 | chipRptrOperStatus | 0 | 0 | The chipRptrOperStatus object indicates the operational state of the repeater. The chipRptrHealthText object may be consulted fo… |
1.3.6.1.4.1.49.2.3.1.5.2.5.1.1.1.1.5 | chipRptrHealthText | 0 | 0 | chipRptrHealthtext |
1.3.6.1.4.1.49.2.3.1.5.2.5.1.1.1.1.6 | chipRptrReset | 0 | 0 | Setting this object to reset(2) causes a transition to the START state of Fig 9-2 in section 9 [IEEE 802.3 Std]. Setting this obje… |
1.3.6.1.4.1.49.2.3.1.5.2.5.1.1.1.1.8 | chipRptrTotalPartitionedPorts | 0 | 0 | This object returns the total number of ports in the repeater whose current state meets all three of the following criteria: chi… |