The desired operating mode of the device. The mode
can be changed by setting this object. If the device
does not support the action it will return a bad
value error. The behaviour of these states is
device specific and some of the states may latch
until the state is returned to normal.
normal - standard operating mode / can be used
to cancel a download or return the
device from any latching state.
reboot - force the device to reboot. The
device will reboot into the version
of flash identified by
madgeConfigDefaultFlashVersion.
identify - force the device to identify itself
by flashing lights. This state may
latch.
test - force the device to do a self test.
This state may latch.
erase-config - erase all configuration info
erase-flash - erase the version of microcode stored
in the flash bank identifed by
madgeConfigEraseFlashVersion.
tftp-ip - force the device to start a TFTP
download over IP
tftp-ipx - force the device to start a TFTP
download over IPX
rpl-ipx - force the device to start a RPL
download over IPX
rpl-llc - force the device to start a RPL
download over LLC
The desired operating mode of the device. The mode
can be changed by setting this object. If the device
does not support the action it will return a bad
value error. The behaviour of these states is
device specific and some of the states may latch
until the state is returned to normal.
normal - standard operating mode / can be used
to cancel a download or return the
device from any latching state.
reboot - force the device to reboot. The
device will reboot into the version
of flash identified by
madgeConfigDefaultFlashVersion.
identify - force the device to identify itself
by flashing lights. This state may
latch.
test - force the device to do a self test.
This state may latch.
erase-config - erase all configuration info
erase-flash - erase the version of microcode stored
in the flash bank identifed by
madgeConfigEraseFlashVersion.
tftp-ip - force the device to start a TFTP
download over IP
tftp-ipx - force the device to start a TFTP
download over IPX
rpl-ipx - force the device to start a RPL
download over IPX
rpl-llc - force the device to start a RPL
download over LLC
Parsed from file MADGEBOX-MIB.my.txt
Company: None
Module: MADGEBOX-MIB
The desired operating mode of the device. The mode
can be changed by setting this object. If the device
does not support the action it will return a bad
value error. The behaviour of these states is
device specific and some of the states may latch
until the state is returned to normal.
normal - standard operating mode / can be used
to cancel a download or return the
device from any latching state.
reboot - force the device to reboot. The
device will reboot into the version
of flash identified by
madgeConfigDefaultFlashVersion.
identify - force the device to identify itself
by flashing lights. This state may
latch.
test - force the device to do a self test.
This state may latch.
erase-config - erase all configuration info
erase-flash - erase the version of microcode stored
in the flash bank identifed by
madgeConfigEraseFlashVersion.
tftp-ip - force the device to start a TFTP
download over IP
tftp-ipx - force the device to start a TFTP
download over IPX
rpl-ipx - force the device to start a RPL
download over IPX
rpl-llc - force the device to start a RPL
download over LLC
halt - force the defice to shutdown ready
for power off
up-tftp-ip - force the device to start a TFTP
upload over IP
up-tftp-ipx - force the device to start a TFTP
upload over IPX
snapshot - force the device to take a snapshot
of its current configuration
Parsed from file MADGEBOX-MIB.mib
Module: MADGEBOX-MIB
madgeConfigAdminStatus OBJECT-TYPE SYNTAX INTEGER { normal (1), reboot (2), identify (3), test (4), erase-config (5), erase-flash (6), tftp-ip (7), tftp-ipx (8), rpl-ipx (9), rpl-llc (10) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired operating mode of the device. The mode can be changed by setting this object. If the device does not support the action it will return a bad value error. The behaviour of these states is device specific and some of the states may latch until the state is returned to normal. normal - standard operating mode / can be used to cancel a download or return the device from any latching state. reboot - force the device to reboot. The device will reboot into the version of flash identified by madgeConfigDefaultFlashVersion. identify - force the device to identify itself by flashing lights. This state may latch. test - force the device to do a self test. This state may latch. erase-config - erase all configuration info erase-flash - erase the version of microcode stored in the flash bank identifed by madgeConfigEraseFlashVersion. tftp-ip - force the device to start a TFTP download over IP tftp-ipx - force the device to start a TFTP download over IPX rpl-ipx - force the device to start a RPL download over IPX rpl-llc - force the device to start a RPL download over LLC" ::= { madgeConfig 9 }
Vendor: Madge Networks, Inc.
Module: MADGEBOX-MIB
[Automatically extracted from oidview.com]
madgeConfigAdminStatus OBJECT-TYPE SYNTAX INTEGER { normal (1), reboot (2), identify (3), test (4), erase-config (5), erase-flash (6), tftp-ip (7), tftp-ipx (8), rpl-ipx (9), rpl-llc (10) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired operating mode of the device. The mode can be changed by setting this object. If the device does not support the action it will return a bad value error. The behaviour of these states is device specific and some of the states may latch until the state is returned to normal. normal - standard operating mode / can be used to cancel a download or return the device from any latching state. reboot - force the device to reboot. The device will reboot into the version of flash identified by madgeConfigDefaultFlashVersion. identify - force the device to identify itself by flashing lights. This state may latch. test - force the device to do a self test. This state may latch. erase-config - erase all configuration info erase-flash - erase the version of microcode stored in the flash bank identifed by madgeConfigEraseFlashVersion. tftp-ip - force the device to start a TFTP download over IP tftp-ipx - force the device to start a TFTP download over IPX rpl-ipx - force the device to start a RPL download over IPX rpl-llc - force the device to start a RPL download over LLC" ::= { madgeConfig 9 }
madgeConfigAdminStatus OBJECT-TYPE SYNTAX INTEGER { normal (1), reboot (2), identify (3), test (4), erase-config (5), erase-flash (6), tftp-ip (7), tftp-ipx (8), rpl-ipx (9), rpl-llc (10), halt (11), up-tftp-ip (12), up-tftp-ipx (13), snapshot (14) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired operating mode of the device. The mode can be changed by setting this object. If the device does not support the action it will return a bad value error. The behaviour of these states is device specific and some of the states may latch until the state is returned to normal. normal - standard operating mode / can be used to cancel a download or return the device from any latching state. reboot - force the device to reboot. The device will reboot into the version of flash identified by madgeConfigDefaultFlashVersion. identify - force the device to identify itself by flashing lights. This state may latch. test - force the device to do a self test. This state may latch. erase-config - erase all configuration info erase-flash - erase the version of microcode stored in the flash bank identifed by madgeConfigEraseFlashVersion. tftp-ip - force the device to start a TFTP download over IP tftp-ipx - force the device to start a TFTP download over IPX rpl-ipx - force the device to start a RPL download over IPX rpl-llc - force the device to start a RPL download over LLC halt - force the defice to shutdown ready for power off up-tftp-ip - force the device to start a TFTP upload over IP up-tftp-ipx - force the device to start a TFTP upload over IPX snapshot - force the device to take a snapshot of its current configuration" ::= { madgeConfig 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.494.10.1.9.0 | madgeConfigAdminStatus | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.494.10.1.1 | madgeConfigIPAddress | 1 | 1 | The IP address of the device. |
| 1.3.6.1.4.1.494.10.1.2 | madgeConfigIPGateway | 1 | 1 | The default IP gateway for the device. |
| 1.3.6.1.4.1.494.10.1.3 | madgeConfigIPSubnetMask | 1 | 1 | The IP subnet mask of the device. |
| 1.3.6.1.4.1.494.10.1.4 | madgeConfigSerialNumber | 1 | 1 | The burnt-in identifier of the device. This is a unique number and in most cases maps directly to the base MAC address of the dev… |
| 1.3.6.1.4.1.494.10.1.5 | madgeConfigMCodeVersion | 1 | 1 | Microcode version of the device. Stored in the format :- first Byte - not used - microcode major version number - microcode minor v… |
| 1.3.6.1.4.1.494.10.1.6 | madgeConfigBCodeVersion | 1 | 1 | Bootcode version of the device and the hardware version. Stored in the format :- High Byte - hardware version number - bootcode ma… |
| 1.3.6.1.4.1.494.10.1.7 | madgeConfigMCodeFilename | 1 | 1 | Original filename for the microcode that has been downloaded to the device. |
| 1.3.6.1.4.1.494.10.1.8 | madgeConfigDeviceHealth | 1 | 1 | Current health of the device Normal - everything is fine warning - something the user should be aware of degraded - the box is … |
| 1.3.6.1.4.1.494.10.1.10 | madgeConfigPassword | 1 | 1 | The case insensitive password for the device. Any GET operation on this object will return PUBLIC. If an attempt is made to set t… |
| 1.3.6.1.4.1.494.10.1.11 | madgeConfigLinkTest | 1 | 1 | An object that can be written with any value to test whether a management station knows the correct device password |
| 1.3.6.1.4.1.494.10.1.12 | madgeConfigOperStatus | 1 | 1 | The current operating mode of the device. normal - standard operating mode reboot - the device is rebooting identify … |
| 1.3.6.1.4.1.494.10.1.13 | madgeConfigEraseFlashVersion | 1 | 1 | A valid version index for the bank of flash to erase when AdminStatus is set to erase-flash. NOTE:This variable is only available… |
| 1.3.6.1.4.1.494.10.1.14 | madgeConfigDefaultFlashVersion | 1 | 1 | The version index of the default flash bank that a device will reboot into when a standard reboot is performed. NOTE:This variable… |
| 1.3.6.1.4.1.494.10.1.15 | madgeConfigReadPassword | 0 | 0 | The case insensitive read password for the device. This password is used to authenticate all SNMP GET and GET-NEXT operations. An… |
| 1.3.6.1.4.1.494.10.1.16 | madgeConfigSnapshotName | 0 | 0 | This specifies the name under which to store a snapshot of the current configuration. |
| 1.3.6.1.4.1.494.10.1.17 | madgeConfigDefaultSnapshot | 0 | 0 | This contains the version index of the snapshot that the device should take its configuration from on the next reboot. |
| 1.3.6.1.4.1.494.10.1.20 | madgeConfigPasswordTableSize | 0 | 0 | The size of the password table in the device. This should be a static value. A value of zero indicates no table, and that only … |
| 1.3.6.1.4.1.494.10.1.21 | madgeConfigPasswordTable | 1 | 5 | A static table containing a list of passwords that can be used to manage the device. Reading this table is only sensible to see … |