This controls the RMON snoop address used when
ringswitchPortRMONMode is set to 'snooping'.
A value of all zeroes results in no snooping
taking place.
Parsed from file MADGERSW-MIB.mib
Module: MADGERSW-MIB
Vendor: Madge Networks, Inc.
Module: MADGERSW-MIB
[Automatically extracted from oidview.com]
ringswitchPortRMONSnoop OBJECT-TYPE SYNTAX TRNMacAddress ACCESS read-write STATUS mandatory DESCRIPTION "This controls the RMON snoop address used when ringswitchPortRMONMode is set to 'snooping'. A value of all zeroes results in no snooping taking place." ::= { ringswitchPortEntry 29 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.494.4.2.1.1.1 | ringswitchPortNum | 0 | 0 | The port number of the port for which this entry contains Ringswitch management information. |
| 1.3.6.1.4.1.494.4.2.1.1.2 | ringswitchPortRingStatus | 0 | 0 | The status of the ring to which this port is connected. |
| 1.3.6.1.4.1.494.4.2.1.1.3 | ringswitchPortAdapterStatus | 0 | 0 | The status of the adapter used by this port. |
| 1.3.6.1.4.1.494.4.2.1.1.4 | ringswitchPortMediaType | 0 | 0 | Media type of the port. |
| 1.3.6.1.4.1.494.4.2.1.1.5 | ringswitchPortIfMode | 0 | 0 | Node or concentrator status of the port. |
| 1.3.6.1.4.1.494.4.2.1.1.6 | ringswitchPortRingSpeed | 0 | 0 | Speed of the ring to which this port is connected. |
| 1.3.6.1.4.1.494.4.2.1.1.7 | ringswitchPortTestState | 0 | 0 | Current state of the bridge test. |
| 1.3.6.1.4.1.494.4.2.1.1.8 | ringswitchPortTestError | 0 | 0 | Result of the bridge test. |
| 1.3.6.1.4.1.494.4.2.1.1.9 | ringswitchPortTestPhase | 0 | 0 | Current phase of the bridge test. |
| 1.3.6.1.4.1.494.4.2.1.1.10 | ringswitchPortSummary | 0 | 0 | This is a four octet field which packs some of the port attributes into a single mib entry. Each nibble represents a different at… |
| 1.3.6.1.4.1.494.4.2.1.1.11 | ringswitchPortAddress | 0 | 0 | The hard wired address of the port. |
| 1.3.6.1.4.1.494.4.2.1.1.12 | ringswitchPortLAA | 0 | 0 | The locally administered address of the port. |
| 1.3.6.1.4.1.494.4.2.1.1.13 | ringswitchPortStationType | 0 | 0 | Workstations-only status of the port; if this is limited, the port only has workstations on it, and broadcast frames received on … |
| 1.3.6.1.4.1.494.4.2.1.1.14 | ringswitchPortRPSEnable | 0 | 0 | Enables or disables the Ring Parameter Server function on the port. If this variable is set to enabled, the port will enable the … |
| 1.3.6.1.4.1.494.4.2.1.1.15 | ringswitchPortCutThruEnable | 0 | 0 | Enables or disables cut-through switching on the port. In some circumstances (e.g., 4 to 16 MB switching), cut-through will alway… |
| 1.3.6.1.4.1.494.4.2.1.1.16 | ringswitchPortInOctets | 0 | 0 | 48 bit version of the interface MIB counter ifInOctets. |
| 1.3.6.1.4.1.494.4.2.1.1.17 | ringswitchPortOutOctets | 0 | 0 | 48 bit version of the interface MIB counter ifOutOctets. |
| 1.3.6.1.4.1.494.4.2.1.1.18 | ringswitchPortSpecInFrames | 0 | 0 | 48 bit version of the Bridge MIB counter srPortSpecInFrames. |
| 1.3.6.1.4.1.494.4.2.1.1.19 | ringswitchPortSpecOutFrames | 0 | 0 | 48 bit version of the Bridge MIB counter srPortSpecOutFrames. |
| 1.3.6.1.4.1.494.4.2.1.1.20 | ringswitchPortApeInFrames | 0 | 0 | 48 bit version of the Bridge MIB counter srPortApeInFrames. |
| 1.3.6.1.4.1.494.4.2.1.1.21 | ringswitchPortApeOutFrames | 0 | 0 | 48 bit version of the Bridge MIB counter srPortApeOutFrames. |
| 1.3.6.1.4.1.494.4.2.1.1.22 | ringswitchPortSteInFrames | 0 | 0 | 48 bit version of the Bridge MIB counter srPortSteInFrames. |
| 1.3.6.1.4.1.494.4.2.1.1.23 | ringswitchPortSteOutFrames | 0 | 0 | 48 bit version of the Bridge MIB counter srPortSteOutFrames. |
| 1.3.6.1.4.1.494.4.2.1.1.24 | ringswitchPortResetCounters | 0 | 0 | Use this variable to reset all the counters on this port, including those in the ringswitchPort, dot1dSRPort, ifEntry and fddimib… |
| 1.3.6.1.4.1.494.4.2.1.1.25 | ringswitchPortFixupMode | 0 | 0 | This MIB variable controls operation of protocol fixups on an FDDI linecard. When set to fddi-all, embedded MAC addresses in fram… |
| 1.3.6.1.4.1.494.4.2.1.1.26 | ringswitchPortForwardMode | 0 | 0 | This MIB variable controls the bridging modes that are enabled on this port. Any combination of the two types of bridging - trans… |
| 1.3.6.1.4.1.494.4.2.1.1.27 | ringswitchPortRMONCapabilities | 0 | 0 | A value that indicates the RMON capabilities of the port. The value represents the highest level RMON mode which the port can sup… |
| 1.3.6.1.4.1.494.4.2.1.1.28 | ringswitchPortRMONMode | 0 | 0 | Controls the types of frames passed to the RMON probe function for processing as follows: disabled - no frames passed to the RMON… |
| 1.3.6.1.4.1.494.4.2.1.1.30 | ringswitchPortTransparentInFrames | 0 | 0 | 48 bit version of the Bridge MIB counter TpPortInFrames. |
| 1.3.6.1.4.1.494.4.2.1.1.31 | ringswitchPortTransparentOutFrames | 0 | 0 | 48 bit version of the Bridge MIB counter TpPortOutFrames. |
| 1.3.6.1.4.1.494.4.2.1.1.32 | ringswitchPortTransparentDiscFrames | 0 | 0 | 48 bit version of the Bridge MIB counter TpPortInDiscards. |
| 1.3.6.1.4.1.494.4.2.1.1.33 | ringswitchPortLEDs | 0 | 0 | An octet string containing the colour of every LED on the port, one per octet: off (1), on-red (2), on-green… |