The maximum frame size requested for the Ethernet
or Gigabit port. For 10/100 Ethernet this value can
only be set to 1514. For Gigabit other larger values
are supported for jumbo frames. Any changes to this
value will not take place until the switch is
rebooted. The max size available will be dependent
on the switch buffer size - 5K or 18K.
Parsed from file MADGERSW-MIB.mib
Module: MADGERSW-MIB
Vendor: Madge Networks, Inc.
Module: MADGERSW-MIB
[Automatically extracted from oidview.com]
ringswitchEthernetIfAdminMaxFrameSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum frame size requested for the Ethernet or Gigabit port. For 10/100 Ethernet this value can only be set to 1514. For Gigabit other larger values are supported for jumbo frames. Any changes to this value will not take place until the switch is rebooted. The max size available will be dependent on the switch buffer size - 5K or 18K." ::= { ringswitchEthernetIfEntry 24 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.494.4.21.1.1.1 | ringswitchEthernetIfIndex | 0 | 0 | The port number of the Ethernet port for which this entry contains Ethernet information. |
1.3.6.1.4.1.494.4.21.1.1.2 | ringswitchEthernetIfIPXEthType | 0 | 0 | ringswitchEthernetIfIPXEthtype |
1.3.6.1.4.1.494.4.21.1.1.3 | ringswitchEthernetIfOperIPXEthType | 0 | 0 | ringswitchEthernetIfOperIPXEthtype |
1.3.6.1.4.1.494.4.21.1.1.4 | ringswitchEthernetIfIPXTRType | 0 | 0 | This variable specifies the encapsulation type on TRN for all IPX frames forwarded from an Ethernet port |
1.3.6.1.4.1.494.4.21.1.1.5 | ringswitchEthernetIfOperIPXTRType | 0 | 0 | This variable specifies the actual encapsulation type for all IPX frames forwarded onto Token Ring |
1.3.6.1.4.1.494.4.21.1.1.6 | ringswitchEthernetIfIPXEnable | 0 | 0 | If this variable is enabled on an Ethernet port then the port will do translational bridging of IPX frames, otherwise it will dis… |
1.3.6.1.4.1.494.4.21.1.1.7 | ringswitchEthernetIfIPEnable | 0 | 0 | If this variable is enabled on an Ethernet port then the port will do translational bridging of IP, ARP and RARP frames, otherwis… |
1.3.6.1.4.1.494.4.21.1.1.8 | ringswitchEthernetIfAdminSpeed | 0 | 0 | This variable specifies the speed that the Ethernet port will open at. |
1.3.6.1.4.1.494.4.21.1.1.9 | ringswitchEthernetIfOperSpeed | 0 | 0 | The current operational speed of the network to which this interface is connected. |
1.3.6.1.4.1.494.4.21.1.1.10 | ringswitchEthernetIfAdminDuplexMode | 0 | 0 | This variable specifies the duplex mode of the Ethernet port. |
1.3.6.1.4.1.494.4.21.1.1.11 | ringswitchEthernetIfOperDuplexMode | 0 | 0 | The current operational mode of this interface. |
1.3.6.1.4.1.494.4.21.1.1.12 | ringswitchEthernetIfIPMulticastType | 0 | 0 | This variable specifies the type of MAC address to use as the destination for IP multicast frames on Token Ring |
1.3.6.1.4.1.494.4.21.1.1.13 | ringswitchEthernetIfCacheClear | 0 | 0 | This variable clears the RIF cache |
1.3.6.1.4.1.494.4.21.1.1.14 | ringswitchEthernetIfSPTEncaps | 0 | 0 | This variable specifies whether BPDU's received from Ethernet are encapsulated when forwared onto Token Ring. Encapsulated BPDU's… |
1.3.6.1.4.1.494.4.21.1.1.15 | ringswitchEthernetIfPriorityTagging | 0 | 0 | When this variable is enabled, frames onto ethernet ring are priority tagged (using 802.1p) with the token ring priority |
1.3.6.1.4.1.494.4.21.1.1.16 | ringswitchEthernetIfPriorityTaggingVLANId | 0 | 0 | VLAN ID to be used when ringswitchEthernetIfPriorityTagging is enabled. |
1.3.6.1.4.1.494.4.21.1.1.17 | ringswitchEthernetIfAdminIPXNetwork | 0 | 0 | The IPX network number of the port. If this is zero then the IPX network number is learned automatically. |
1.3.6.1.4.1.494.4.21.1.1.18 | ringswitchEthernetIfOperIPXNetwork | 0 | 0 | The actual IPX network number of the port. |
1.3.6.1.4.1.494.4.21.1.1.19 | ringswitchEthernetIfSTPBlockingTrapInfo | 0 | 0 | Trap set if circulating encapsulated BPDU frames are detected (indicating a 3rd party bridge) which cause the port to go into blo… |
1.3.6.1.4.1.494.4.21.1.1.20 | ringswitchEthernetIfAdminFlowCtrl | 0 | 0 | This variable specifies the flow control abilities that the Gigabit port will use. For 10/100 Ethernet ports this variable will a… |
1.3.6.1.4.1.494.4.21.1.1.21 | ringswitchEthernetIfOperFlowCtrl | 0 | 0 | The current flow control operational mode for the Gigabit interface. For 10/100 Ethernet ports this variable will always be unkno… |
1.3.6.1.4.1.494.4.21.1.1.22 | ringswitchEthernetIfAutoNegotiate | 0 | 0 | This variable specifies whether the Gigabit interface will auto-negotiate the link properties or whether it will force the link u… |
1.3.6.1.4.1.494.4.21.1.1.23 | ringswitchEthernetIfMediaType | 0 | 0 | This variable specifies the media type of the 10/100 Ethernet or Gigabit port. |
1.3.6.1.4.1.494.4.21.1.1.25 | ringswitchEthernetIfOperMaxFrameSize | 0 | 0 | The maximum frame size currently used on the Ethernet or Gigabit port. For 10/100 Ethernet this value can only be 1514. For Gigab… |