Determines the name the network administrator assigns to the CPU card.
When you configure via the local console, this name is the command prompt.
The setting of this object is dynamic. The system immediately implements
the name you choose.
Range of Values: From 1 to 32 alphanumeric characters. You can use any
combination of lettersor numbers; however, you cannot use blank spaces.
Use a dash or underscore as a delimiter.
Default value:
- CX900 architecture: CX900
- CX1000 architecture: CX1000
Configuration Changed: Operative
Parsed from file CXMH.MIB.txt
Company: None
Module: CXModuleHardware-MIB
Determines the name the network administrator assigns to the CPU card.
When you configure via the local console, this name is the command prompt.
The setting of this object is dynamic. The system immediately implements
the name you choose.
Range of Values: From 1 to 32 alphanumeric characters. You can use any
combination of lettersor numbers; however, you cannot use blank spaces.
Use a dash or underscore as a delimiter.
Default value:
- CX900 architecture: CX900
- CX1000 architecture: CX1000
Configuration Changed: Operative
Parsed from file CXModuleHardware-MIB.mib
Module: CXModuleHardware-MIB
Vendor: Memotec Communications
Module: CXModuleHardware-MIB
[Automatically extracted from oidview.com]
cxModuleHwAlias OBJECT-TYPE SYNTAX Alias ACCESS read-write STATUS mandatory DESCRIPTION "Determines the name the network administrator assigns to the CPU card. When you configure via the local console, this name is the command prompt. The setting of this object is dynamic. The system immediately implements the name you choose. Range of Values: From 1 to 32 alphanumeric characters. You can use any combination of lettersor numbers; however, you cannot use blank spaces. Use a dash or underscore as a delimiter. Default value: - CX900 architecture: CX900 - CX1000 architecture: CX1000 Configuration Changed: Operative" ::= { cxModuleHardware 1 }
cxModuleHwAlias OBJECT-TYPE SYNTAX Alias ACCESS read-write STATUS mandatory DESCRIPTION "Determines the name the network administrator assigns to the CPU card. When you configure via the local console, this name is the command prompt. The setting of this object is dynamic. The system immediately implements the name you choose. Range of Values: From 1 to 32 alphanumeric characters. You can use any combination of lettersor numbers; however, you cannot use blank spaces. Use a dash or underscore as a delimiter. Default value: - CX900 architecture: CX900 - CX1000 architecture: CX1000 Configuration Changed: Operative" ::= { cxModuleHardware 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.5.1.1.0 | cxModuleHwAlias | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.5.1.2 | cxModuleHwRevAssemblyAndEco | 1 | 1 | Displays the hardware revision of the device. You cannot modify this object. It is a display that the software provides. Range of… |
| 1.3.6.1.4.1.495.2.1.5.1.3 | cxModuleHwPhysSlot | 1 | 1 | Displays the number of the physical slot where the CPU card resides. You cannot modify this object. It is a display that the sof… |
| 1.3.6.1.4.1.495.2.1.5.1.4 | cxModuleHwCpuClockSpeed | 1 | 1 | Displays the CPU clock rate in Khz. You cannot modify this object. It is a display that the software provides. Range of Values: N… |
| 1.3.6.1.4.1.495.2.1.5.1.5 | cxModuleHwLedsDisplay | 1 | 1 | Displays the status of the error LED. You cannot modify this object. It is a display that the software provides. Options: on: Erro… |
| 1.3.6.1.4.1.495.2.1.5.1.7 | cxModuleHwFlashEpromSize | 1 | 1 | Dispays the size, in Kbytes, of the Flash EPROM. You cannot modify this object. It is a display that the software provides. Range… |
| 1.3.6.1.4.1.495.2.1.5.1.8 | cxModuleHwPrivateDramSize | 1 | 1 | Displays the size, in Kbytes, of the System DRAM. You cannot modify this object. It is a display that the software provides. Rang… |
| 1.3.6.1.4.1.495.2.1.5.1.9 | cxModuleHwSharedDramSize | 1 | 1 | Displays the size, in Kbytes, of the Data Buffer DRAM. You cannot modify this object. It is a display that the software provides… |
| 1.3.6.1.4.1.495.2.1.5.1.12 | cxModuleHwUpTimeTicks | 1 | 1 | Displays the number of time ticks,in 10msec increments, since power up. You cannot modify this object. It is a display that the … |
| 1.3.6.1.4.1.495.2.1.5.1.13 | cxModuleHwResetTimeOut | 1 | 1 | Determines the length of delay, in seconds before next scheduled card reset. This type of reset saves the configuration before r… |
| 1.3.6.1.4.1.495.2.1.5.1.14 | cxModuleHwSwVersion | 1 | 1 | Displays the textual string which identifies the software currently running on the device. You cannot modify this object. It is a… |
| 1.3.6.1.4.1.495.2.1.5.1.15 | cxModuleHwNodeId | 1 | 1 | Identifies this system with an ID number. This parameter is used only for SKYDATA's connection management. Range of Values: 0 to … |