Indicates the state of the destination link.
Options:
offLine (1): Indicates that this cross-connection is not defined at the
layer or too many cross-connections have been defined.
notConnected (2): The connection is idle.
connecting (3): The connection is in the process of being established.
waitXid (4): Awaiting an incoming SNA XID frame to continue the link
establishment process.
setMode (5): A Set Mode command was sent to the remote station.
waitPartner (6): The link is established but is waiting for establishment
on the other cross- connected link.
sendXid (7): Awaiting the appropriate response to an XID that was sent to
the remote.
waitSetMode (8): Waiting for a Set Mode command from the remote.
delayConnect (9): Waiting for the connection timer
(snalcCrossConnectDstConnectInterval) to expire in order to retry the
connection.
associated (10): Indicates that both the source and destination link
levels are established and that connection establishment frames may be
exchanged.
disconnecting (11): The link is being disconnected.
linkDisconnecting (12): The link is terminating data exchange mode.
waitDisconnect (13): Waiting for the remote to clear the link.
failed (14) The cross-connection process failed. To retry, set
snalcCrossConnectAdminStatus from 'up' to 'down' and back to 'up'.
data (15): Indicates that the cross- connection between the source and
destination is established and that data frames may be exchanged.
Parsed from file CXSNALC.MIB.txt
Company: None
Module: CXSnaLinkConversionModule-MIB
Indicates the state of the destination link.
Options:
offLine (1): Indicates that this cross-connection is not defined at the
layer or too many cross-connections have been defined.
notConnected (2): The connection is idle.
connecting (3): The connection is in the process of being established.
waitXid (4): Awaiting an incoming SNA XID frame to continue the link
establishment process.
setMode (5): A Set Mode command was sent to the remote station.
waitPartner (6): The link is established but is waiting for establishment
on the other cross- connected link.
sendXid (7): Awaiting the appropriate response to an XID that was sent to
the remote.
waitSetMode (8): Waiting for a Set Mode command from the remote.
delayConnect (9): Waiting for the connection timer
(snalcCrossConnectDstConnectInterval) to expire in order to retry the
connection.
associated (10): Indicates that both the source and destination link
levels are established and that connection establishment frames may be
exchanged.
disconnecting (11): The link is being disconnected.
linkDisconnecting (12): The link is terminating data exchange mode.
waitDisconnect (13): Waiting for the remote to clear the link.
failed (14) The cross-connection process failed. To retry, set
snalcCrossConnectAdminStatus from 'up' to 'down' and back to 'up'.
data (15): Indicates that the cross- connection between the source and
destination is established and that data frames may be exchanged.
Parsed from file CXSnaLinkConversionModule-MIB.mib
Module: CXSnaLinkConversionModule-MIB
Vendor: Memotec Communications
Module: CXSnaLinkConversionModule-MIB
[Automatically extracted from oidview.com]
snalcCrossConnectDstOperStatus OBJECT-TYPE SYNTAX INTEGER { offLine (1), notConnected (2), connecting (3), waitXid (4), setMode (5), waitPartner (6), sendXid (7), waitSetMode (8), delayConnect (9), associated (10), disconnecting (11), linkDisconnecting (12), waitDisconnect (13), failed (14), data (15) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the state of the destination link. Options: offLine (1): Indicates that this cross-connection is not defined at the layer or too many cross-connections have been defined. notConnected (2): The connection is idle. connecting (3): The connection is in the process of being established. waitXid (4): Awaiting an incoming SNA XID frame to continue the link establishment process. setMode (5): A Set Mode command was sent to the remote station. waitPartner (6): The link is established but is waiting for establishment on the other cross- connected link. sendXid (7): Awaiting the appropriate response to an XID that was sent to the remote. waitSetMode (8): Waiting for a Set Mode command from the remote. delayConnect (9): Waiting for the connection timer (snalcCrossConnectDstConnectInterval) to expire in order to retry the connection. associated (10): Indicates that both the source and destination link levels are established and that connection establishment frames may be exchanged. disconnecting (11): The link is being disconnected. linkDisconnecting (12): The link is terminating data exchange mode. waitDisconnect (13): Waiting for the remote to clear the link. failed (14) The cross-connection process failed. To retry, set snalcCrossConnectAdminStatus from 'up' to 'down' and back to 'up'. data (15): Indicates that the cross- connection between the source and destination is established and that data frames may be exchanged." ::= { snalcCrossConnectEntry 15 }
snalcCrossConnectDstOperStatus OBJECT-TYPE SYNTAX INTEGER { offLine (1), notConnected (2), connecting (3), waitXid (4), setMode (5), waitPartner (6), sendXid (7), waitSetMode (8), delayConnect (9), associated (10), disconnecting (11), linkDisconnecting (12), waitDisconnect (13), failed (14), data (15) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the state of the destination link. Options: offLine (1): Indicates that this cross-connection is not defined at the layer or too many cross-connections have been defined. notConnected (2): The connection is idle. connecting (3): The connection is in the process of being established. waitXid (4): Awaiting an incoming SNA XID frame to continue the link establishment process. setMode (5): A Set Mode command was sent to the remote station. waitPartner (6): The link is established but is waiting for establishment on the other cross- connected link. sendXid (7): Awaiting the appropriate response to an XID that was sent to the remote. waitSetMode (8): Waiting for a Set Mode command from the remote. delayConnect (9): Waiting for the connection timer (snalcCrossConnectDstConnectInterval) to expire in order to retry the connection. associated (10): Indicates that both the source and destination link levels are established and that connection establishment frames may be exchanged. disconnecting (11): The link is being disconnected. linkDisconnecting (12): The link is terminating data exchange mode. waitDisconnect (13): Waiting for the remote to clear the link. failed (14) The cross-connection process failed. To retry, set snalcCrossConnectAdminStatus from 'up' to 'down' and back to 'up'. data (15): Indicates that the cross- connection between the source and destination is established and that data frames may be exchanged." ::= { snalcCrossConnectEntry 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.35.11.1.1 | snalcCrossConnectSrcSapNumber | 0 | 0 | Identifies the source link for a cross-connection. When cross- connecting hierarchical SNA devices, the source link is the side … |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.2 | snalcCrossConnectSrcLinkAddrIndex | 0 | 0 | Identifies the link level connection for the source-side of a cross- connection. Many link level connections can share the same … |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.3 | snalcCrossConnectDstSapNumber | 0 | 0 | Identifies the destination link for a cross-connection. When cross- connecting hierarchical SNA devices, the destination link is… |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.4 | snalcCrossConnectDstLinkAddrIndex | 0 | 0 | Identifies the link level connection for the destination-side of a cross- connection. Many link level connections can share the … |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.5 | snalcCrossConnectRowStatus | 0 | 0 | Determines the status of the objects in a table row. Options: invalid (1): Row is flagged, after next reset the values will be di… |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.6 | snalcCrossConnectPuId | 0 | 0 | Determines the SNA PU identifier sent to the host in an XID. The PU identifier is composed of the block ID and node ID. This obj… |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.7 | snalcCrossConnectMaxRetries | 0 | 0 | Determines the maximum number of attempts to establish this cross- connection before it is abandoned. If set to 255, SNA Link Co… |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.8 | snalcCrossConnectConnectInterval | 0 | 0 | Determines the delay between attempts to establish this cross-connection when not in slow connect mode. Range of Values: 1 - 6553… |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.9 | snalcCrossConnectSlowConnectThreshold | 0 | 0 | Determines the number of attempts that are made to establish a cross- connection using the snalcCrossConnectConnectInterval . Wh… |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.10 | snalcCrossConnectSlowConnectInterval | 0 | 0 | Determines the delay between attempts to establish a cross-connection when in slow connect mode. Range of Values: 1 - 65535 Defaul… |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.11 | snalcCrossConnectWaitContactTimer | 0 | 0 | Determines the amount of time to wait for a Set Mode or SNA XID frame from the remote station after the link has been establishe… |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.12 | snalcCrossConnectConnectMethod | 0 | 0 | Determines how the cross-connected links are established. This object may be set only if the value of the associated snalcCrossCo… |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.13 | snalcCrossConnectAdminStatus | 0 | 0 | Control which allows the cross- connections to be established or disconnected. The order in which links are established is deter… |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.14 | snalcCrossConnectSrcOperStatus | 0 | 0 | Indicates the state of the source link. Options: offLine (1): Indicates that this cross-connection is not defined at the layer or … |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.16 | snalcCrossConnectXidTransparent | 0 | 0 | Determines if any changes are to be made to the XID. If transparent mode is specified, XID information fields are not modified, … |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.17 | snalcCrossConnectDataLinkType | 0 | 0 | Configurates the type of connection. Two types are supported : SNA connections, using the SDLC data link layer. BSC connections, … |