Identifies the configuration information for a specific DDS access point and
its associated hardware port.
Parsed from file CXDDS.MIB.txt
Company: None
Module: CXDDS-MIB
Identifies the configuration information for a specific DDS access point and
its associated hardware port.
Parsed from file CXDDS-MIB.mib
Module: CXDDS-MIB
Vendor: Memotec Communications
Module: CXDDS-MIB
[Automatically extracted from oidview.com]
ddsSlotEntry OBJECT-TYPE SYNTAX DdsSlotEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Identifies the configuration information for a specific DDS access point and its associated hardware port." INDEX { ddsSlotNumber } ::= { ddsSlotTable 1 }
ddsSlotEntry OBJECT-TYPE SYNTAX DdsSlotEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Identifies the configuration information for a specific DDS access point and its associated hardware port." INDEX { ddsSlotNumber } ::= { ddsSlotTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.39.1.1.1 | ddsSlotNumber | 0 | 0 | Identifies a DDS access point by a numerical value. Each DDS access point has a unique value. |
| 1.3.6.1.4.1.495.2.1.6.39.1.1.2 | ddsSlotAlias | 0 | 0 | Assigns a textual name to the DDS access point. Each access point requires a unique name. You may not assign the same name twice… |
| 1.3.6.1.4.1.495.2.1.6.39.1.1.3 | ddsSlotRowStatus | 0 | 0 | Determines the status of the objects in a row. Default Value: valid Options: invalid (1): row is flagged, after next reset the val… |
| 1.3.6.1.4.1.495.2.1.6.39.1.1.4 | ddsSlotStatus | 0 | 0 | Identifies the status of the DDS option card as present, not present or present but failed. Default Value: none Options: dds_not_pr… |
| 1.3.6.1.4.1.495.2.1.6.39.1.1.5 | ddsSlotConfigLineType | 0 | 0 | Assigns the DDS line configuration. Default Value: telco_point_to_point (1) Options: telco_point_to_point (1) telco_multipoint (2) id… |
| 1.3.6.1.4.1.495.2.1.6.39.1.1.6 | ddsSlotConfigLineService | 0 | 0 | Assigns the DDS line service type. Default Value: dds_56K (2) Range of Values: clear_channel_64K (1) switched_56K (2) dds_56K (3) dd… |
| 1.3.6.1.4.1.495.2.1.6.39.1.1.7 | ddsSlotConfigLoopback | 0 | 0 | Specifies the DDS loopback type. Default Value: no_loopback (1) Range of Values: no_loopback (1) dte_loopback (2) loop2 (3), loop3 (4… |
| 1.3.6.1.4.1.495.2.1.6.39.1.1.8 | ddsSlotConfigRemLoop2LocalAddress | 0 | 0 | Specifies the local address for V.54 remote loop2. Default Value: none Range of Values: 0 to 255 The 34 valid V.54 hex addresses … |
| 1.3.6.1.4.1.495.2.1.6.39.1.1.9 | ddsSlotConfigRemLoop2RemoteAddress | 0 | 0 | Specifies the remote address for V.54 remote loop2. Range of Values: 0 to 255 Default Value: none Configuration Changed: operative |
| 1.3.6.1.4.1.495.2.1.6.39.1.1.10 | ddsSlotConfigPatternGen | 0 | 0 | Specifies the type of pattern generated. Range of Values: no_pattern (1) pattern_511 (2) pattern_511_with_errors (3) Default Value: … |
| 1.3.6.1.4.1.495.2.1.6.39.1.1.11 | ddsSlotDialNumber | 0 | 0 | Assigns the dial number for switched56 applications. Default Value: none Range of Values: 12 character octet string Configuration … |
| 1.3.6.1.4.1.495.2.1.6.39.1.1.12 | ddsSlotSoftwareRevision | 0 | 0 | Indicates the DDS firmware revision as an integer value from 0 to 255. Default Value: none Range of Values: 0-255 |
| 1.3.6.1.4.1.495.2.1.6.39.1.1.13 | ddsSlotStuffingOption | 0 | 0 | Identifies whether the clear channel chip (ccc) option (for 64K clear channel) is installed. Default Value: none Options: ccc_insta… |
| 1.3.6.1.4.1.495.2.1.6.39.1.1.14 | ddsSlotLineQuality | 0 | 0 | Identifies whether the link is up, if no link exists or if a network error (OOS - out of service) has occurred. Default Value: no… |
| 1.3.6.1.4.1.495.2.1.6.39.1.1.15 | ddsSlotLineRelativeReceiveLevelMin | 0 | 0 | Indicates the minimum relative receive line level. Default Value: none Range of Values: 0-255 |
| 1.3.6.1.4.1.495.2.1.6.39.1.1.16 | ddsSlotLineRelativeReceiveLevelMax | 0 | 0 | Indicates the maximum relative receive line level. Default Value: none Range of Values: 0-255 |
| 1.3.6.1.4.1.495.2.1.6.39.1.1.17 | ddsSlotLineLoopback | 0 | 0 | Indicates the loopback status of the line. Options: none (1) csu_loopback (2) dsu_loopback (3) dte_loopback (4) loop2 (5) loop3 (6) loo… |
| 1.3.6.1.4.1.495.2.1.6.39.1.1.18 | ddsSlotResultErtPatternDetect | 0 | 0 | Identifies the reception of the 511 bit pattern or not. Options: not_receiving_pattern (1) receiving_pattern (2) receiving_patt_wit… |
| 1.3.6.1.4.1.495.2.1.6.39.1.1.19 | ddsSlotResultPatternGen | 0 | 0 | Identifies what type of pattern the DDS is generating on the line. Options: no_pattern (1) ert_pattern (2) ert_with_errors (3) Defau… |
| 1.3.6.1.4.1.495.2.1.6.39.1.1.20 | ddsSlotResultDialing | 0 | 0 | Indicates the dialing result codes for switched56 service as: dialing, connection made, the connection is not switched56, that a… |
| 1.3.6.1.4.1.495.2.1.6.39.1.1.21 | ddsSlotModel | 0 | 0 | Indicates the Printed Circuit Board (PCB) model number . Range of Values: 0-7 Default: none |
| 1.3.6.1.4.1.495.2.1.6.39.1.1.22 | ddsSlotRevision | 0 | 0 | Indicates the PCB revision level. Range of Values: 0-15 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.39.1.1.23 | ddsSlotEco | 0 | 0 | Indicates the PCB Engineering Change Order (ECO) level. Range of Values: 0-15 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.39.1.1.24 | ddsSlotLineTrap | 0 | 0 | Determines the status of the line trap. Options: disabled (1) enabled (2) Default Value: disabled (1) Configuration Changed: operati… |
| 1.3.6.1.4.1.495.2.1.6.39.1.1.25 | ddsSlotLoopTrap | 0 | 0 | Determines the status of the loopback change trap. Range of Values: disabled (1) enabled (2) Default Value: disabled (1) Configurati… |