Describes the configuration information applied to a specific V34 modem
and its associated hardware port.
Parsed from file CXV34.MIB.txt
Company: None
Module: CXV34-MIB
Describes the configuration information applied to a specific V34 modem
and its associated hardware port.
Parsed from file CXV34-MIB.mib
Module: CXV34-MIB
Vendor: Memotec Communications
Module: CXV34-MIB
[Automatically extracted from oidview.com]
v34SlotEntry OBJECT-TYPE SYNTAX V34SlotEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Describes the configuration information applied to a specific V34 modem and its associated hardware port." INDEX { v34SlotNumber } ::= { v34SlotTable 1 }
v34SlotEntry OBJECT-TYPE SYNTAX V34SlotEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Describes the configuration information applied to a specific V34 modem and its associated hardware port." INDEX { v34SlotNumber } ::= { v34SlotTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.495.2.1.6.42.1.1.1 | v34SlotNumber | 0 | 0 | Identifies a numerical value applied to the modem. Each device has a unique number. |
1.3.6.1.4.1.495.2.1.6.42.1.1.2 | v34SlotAlias | 0 | 0 | Assigns a name used for the alias. Each modem requires a unique name. You may not assign the same name twice. Default Value: none… |
1.3.6.1.4.1.495.2.1.6.42.1.1.3 | v34SlotRowStatus | 0 | 0 | Determines the status of the objects in in a table row. Default Value: none Options: invalid (1): row is flagged, after next reset… |
1.3.6.1.4.1.495.2.1.6.42.1.1.4 | v34SlotStatus | 0 | 0 | Identifies the presence or absence of a V.34 modem in the slot and if present, whether it has failed initialization. Default Valu… |
1.3.6.1.4.1.495.2.1.6.42.1.1.5 | v34SlotModemString | 0 | 0 | Determines a string to be sent to the modem upon initialization. Default Value: none Range of Values: 0-32 alphanumberic charact… |
1.3.6.1.4.1.495.2.1.6.42.1.1.6 | v34SlotDialNumber | 0 | 0 | Specifies the number used to dial the remote modem. Default Value: none Range of Values: An octet string of 12 numeric characters… |
1.3.6.1.4.1.495.2.1.6.42.1.1.7 | v34SlotAnswerMode | 0 | 0 | Determines whether the device will answer an incoming call. Default Value: answer_enabled (2) Options: answer_disabled (1) answer_e… |
1.3.6.1.4.1.495.2.1.6.42.1.1.8 | v34SlotSpeedStatus | 0 | 0 | Identifies the connection rate operative during the current dial call only. Default Value: none Options: speed_0_300 (1) speed_600 (… |
1.3.6.1.4.1.495.2.1.6.42.1.1.9 | v34SlotRetrainStatus | 0 | 0 | Identifies whether the modem is retraining or not. It is only applicable while the modem is on-line. Default Value: none Options: n… |
1.3.6.1.4.1.495.2.1.6.42.1.1.10 | v34SlotHookStatus | 0 | 0 | Identifies whether the modem is 'off_hook' (connected to the telephone line), or 'on_hook' (disconnected). Default Value: none Opt… |
1.3.6.1.4.1.495.2.1.6.42.1.1.11 | v34SlotRingStatus | 0 | 0 | Identifies when the modem detects a ring signal from the telephone line. Default Value: none Options: no_ring (1) ring (2) |
1.3.6.1.4.1.495.2.1.6.42.1.1.12 | v34SlotDsrStatus | 0 | 0 | Identifies the data transfer state of the modem by the status of the Data Set Ready (DSR) signal . Default Value: none Options dsr_… |
1.3.6.1.4.1.495.2.1.6.42.1.1.13 | v34SlotDtrStatus | 0 | 0 | Identifies the status of the Data Terminal Ready (DTR) signal that the motherboard uses to dial the pre-stored phone number (if … |
1.3.6.1.4.1.495.2.1.6.42.1.1.14 | v34SlotModel | 0 | 0 | Identifies the model number of the Printed Circuit Board (PCB) as an integer value from 0 to 7. Default Value: none Range of Value… |
1.3.6.1.4.1.495.2.1.6.42.1.1.15 | v34SlotRevision | 0 | 0 | Identifies the revision number of the PCB as an integer value from 0 to 15. Default Value: none Range of Values: 0-15 |
1.3.6.1.4.1.495.2.1.6.42.1.1.16 | v34SlotEco | 0 | 0 | Identifies the Engineering Change Order (ECO) level of the PCB as an integer value from 0 to 15. Default Value: none Range of Valu… |