The parameters for a particular controller unit.
Parsed from file CXDSP.MIB.txt
Company: None
Module: CXDSP-MIB
The parameters for a particular controller unit.
Parsed from file CXDSP-MIB.mib
Module: CXDSP-MIB
Vendor: Memotec Communications
Module: CXDSP-MIB
[Automatically extracted from oidview.com]
dspCuEntry OBJECT-TYPE SYNTAX DspCuEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The parameters for a particular controller unit." INDEX { dspCuSapNumber, dspCuAddress } ::= { dspCuTable 1 }
dspCuEntry OBJECT-TYPE SYNTAX DspCuEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The parameters for a particular controller unit." INDEX { dspCuSapNumber, dspCuAddress } ::= { dspCuTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.495.2.1.6.57.2.1.1 | dspCuSapNumber | 0 | 0 | Identifies the sap associated with this controller unit. Each controller unit has an address and the address has to be unique wi… |
1.3.6.1.4.1.495.2.1.6.57.2.1.2 | dspCuAddress | 0 | 0 | Identifies the address of this controller unit. The address has to be unique for a specified sap. |
1.3.6.1.4.1.495.2.1.6.57.2.1.3 | dspCuRowStatus | 0 | 0 | Indicates whether the particular service access point is configured within the MIB. Controller unit entries (rows) may be crea… |
1.3.6.1.4.1.495.2.1.6.57.2.1.4 | dspCuType | 0 | 0 | Identifies the type of controller: either TIU or HIU. |
1.3.6.1.4.1.495.2.1.6.57.2.1.5 | dspCuCallingX25Address | 0 | 0 | Identifies the X25 address of this sap. This address is unique for all devices attached to this sap, TIU side |
1.3.6.1.4.1.495.2.1.6.57.2.1.6 | dspCuCalledX25Address | 0 | 0 | Identifies the X25 address of the remote device. |
1.3.6.1.4.1.495.2.1.6.57.2.1.8 | dspCuDSPCircuitType | 0 | 0 | Identifies the connection as being either only one connection or multiple DSP connections per X.25 virtual circuit The valid v… |
1.3.6.1.4.1.495.2.1.6.57.2.1.9 | dspCuWindow | 0 | 0 | Defines the receive window size used for packets. At the source side, it defines the window for packets received from the sourc… |
1.3.6.1.4.1.495.2.1.6.57.2.1.10 | dspCuUserData | 0 | 0 | The user data put in the call user data field of call request packets. |
1.3.6.1.4.1.495.2.1.6.57.2.1.11 | dspCuFacility | 0 | 0 | Specifies the facility codes and facility parameters put in the facilities field of the call call request packet during call set… |
1.3.6.1.4.1.495.2.1.6.57.2.1.12 | dspCuApplicationId | 0 | 0 | Indicates an application running on the host associated with the controller unit/device. |
1.3.6.1.4.1.495.2.1.6.57.2.1.13 | dspCuReqMode | 0 | 0 | Identifies the connection request mode. The following modes are available : Fixed Class Crm : destination is selected automatical… |
1.3.6.1.4.1.495.2.1.6.57.2.1.14 | dspCuPacketSize | 0 | 0 | The receive and transmit packet size. |
1.3.6.1.4.1.495.2.1.6.57.2.1.15 | dspCuThroughput | 0 | 0 | The receive and transmit throughput class across the line. |
1.3.6.1.4.1.495.2.1.6.57.2.1.16 | dspCuPartner | 0 | 0 | This object identifies the knowledge DSP has about its BSC partner layer and applies to the controllers acting as Terminal Inte… |
1.3.6.1.4.1.495.2.1.6.57.2.1.25 | dspCuControl | 0 | 0 | Control associated with the specified service access point. |
1.3.6.1.4.1.495.2.1.6.57.2.1.30 | dspCuState | 0 | 0 | Control associated with the specified service access point. |
1.3.6.1.4.1.495.2.1.6.57.2.1.31 | dspCuOperationalMode | 0 | 0 | Identifies the controller unit as being active or non-active with the new configuration. |
1.3.6.1.4.1.495.2.1.6.57.2.1.40 | dspCuX25CallRequest | 0 | 0 | Identifies the number of X25 Call Request packets received by this controller. |
1.3.6.1.4.1.495.2.1.6.57.2.1.41 | dspCuX25CallAccept | 0 | 0 | Identifies the number of X25 Call Accept packets received by this controller. |
1.3.6.1.4.1.495.2.1.6.57.2.1.42 | dspCuClears | 0 | 0 | Identifies the number of Clear Request received from the SNALC layer. |
1.3.6.1.4.1.495.2.1.6.57.2.1.43 | dspCuClearsInd | 0 | 0 | Identifies the number of Clear Indications sent to the SNALC layer. |
1.3.6.1.4.1.495.2.1.6.57.2.1.44 | dspCuInvToClear | 0 | 0 | Identifies the number of INVITATION TO CLEAR packets received by this controller. |